Nothing ruins a mowing session quite like a dull blade leaving shredded, yellowing grass tips across your yard. When your push mower starts bogging down in thick turf or producing uneven stripes, the cutting deck often needs a fresh edge. A properly fitted push lawn mower blade ensures clean cuts and reduces strain on your engine, which is crucial for maintaining healthy lawn growth. Many homeowners overlook the importance of center hole geometry, leading to fitment issues that cause vibration and poor performance. By selecting a blade with the correct bow-tie or round hole pattern, you avoid costly spindle damage and ensure smooth operation. This selection focuses on durable steel options that balance airflow and cutting precision for various deck sizes.
Choosing the right replacement involves more than just matching the length; you must consider the lift profile and steel gauge. A high-lift blade enhances bagging suction, while a mulching design shreds clippings for better nutrient absorption. Based on product specifications and user feedback, these nine options offer reliable performance for both walk-behind and self-propelled mowers. We analyzed the manufacturer claims regarding alloy steel composition and powder-coated finishes to identify blades that resist rust and wear. Whether you are dealing with sandy soil erosion or wet morning grass, the right blade profile can transform your mowing experience. Ensure you check the OEM interchange numbers carefully, as slight variations in mounting holes can prevent proper installation. This roundup helps you evaluate these specific models to find the best match for your equipment.
Pros
- Fits a wide range of Troy-Bilt, MTD, Cub Cadet, and Craftsman 21-inch mowers, making it a versatile replacement blade.
- Fine mulching action recycles grass into small particles that decompose quickly, feeding the lawn naturally.
- Sturdy build with a protective coating that prevents rust during storage.
Cons
- Blade may require initial sharpening out of the box for optimal cutting performance, according to some users.
- Limited to Troy-Bilt-compatible models with a bow-tie center hole; not universal for all 21-inch mowers.
- Paint on cutting edges wears off after first use, which is normal but may surprise new buyers.
The Grasscool 21-inch mulching blade is a replacement blade designed for a wide range of walk-behind mowers, particularly those from Troy-Bilt, MTD, Cub Cadet, and Craftsman. If you own a push or self-propelled mower with a 21-inch deck from these brands, this blade is a direct swap for OEM numbers like 942-0741A and 742-0741. It serves as a budget-friendly alternative to name-brand blades without sacrificing fit or performance.
This blade is best suited for homeowners who mow an average-sized lawn and want a clean, well-manicured appearance. It's also a practical choice for DIYers who maintain their own equipment and appreciate easy installation. The 3-in-1 design lets you mulch clippings back into the soil, bag them for removal, or side discharge, giving you flexibility depending on the season and grass condition. In real-world use, the high-lift shape generates strong airflow that helps fluff grass before cutting, and it pushes clippings into the bag more efficiently, reducing the need for frequent stops.
Build quality is solid for the price point. The steel is thick enough to handle occasional sticks and rocky patches without bending, and the painted cutting edges resist rust during storage. Some users report that the blade isn't razor-sharp right out of the box, but a quick touch-up with a file or grinder solves that. Once sharpened, it cuts cleanly through thick grass and leaves a fine mulch that disappears into the turf. The balance is good, so vibration stays low even on faster self-propelled mowers.
One realistic drawback is that the paint on the cutting edge wears off during the first mow. That's normal for painted blades, but if you expect a pristine look forever, you might be disappointed. Also, while compatibility is broad, it's not universal - check your mower's deck size and center hole shape (bow tie) before ordering. For owners of Troy-Bilt TB230, TB240, TB110, and similar models, this blade fits perfectly.
Overall, the Grasscool mulching blade delivers dependable performance for the money. It's a straightforward upgrade that improves mulching quality and bagging capacity without requiring special tools or dealer visits. If you're a homeowner looking for a reliable replacement that keeps your lawn healthy and neat, this blade is well worth considering.
Pros
- Value-oriented two-pack provides an immediate replacement and a spare blade for seasonal rotation
- Alloy steel formulation with chromium and molybdenum is designed for wear and rust resistance
- Protective paint layer on cutting edges protects against transit rust and aids safer initial handling
- Mulching profile chops clippings finely to return nutrients directly to the turf without bagging
Cons
- Only fits mower decks configured for a bow-tie center hole pattern, excluding round or star-pattern spindles
- Mounting hardware such as blade bolts and washers are not included in the package
- Mounting configurations may differ across mower model years, requiring buyers to verify their original part number
The Hipa 942-0741A Mulching Blades 2-Pack is an aftermarket replacement cutting set engineered for 21-inch walk-behind and push lawn mowers. Primarily manufactured for Troy-Bilt equipment, this package provides two matching 21-inch mulching blades designed to replace common factory parts like 942-0741A, 742-0741, and 942-04276S. It is well suited for DIY homeowners, residential property caretakers, and lawn equipment owners seeking an economical way to refresh their cutting deck without purchasing individual OEM units.
Compatibility centers strictly on the blade mounting interface. These blades feature a distinctive bow-tie center mounting pattern compatible with a wide array of Troy-Bilt models, including the TB110, TB130, TB210, TB230, TB240, and TB360 series. Because mower manufacturers occasionally alter spindle patterns across different production years of the same model name, buyers need to verify that their existing machine uses a bow-tie configuration rather than a round, star, or proprietary splined hub before installing. Checking your equipment manual or referencing the blade part number ensures a proper mechanical fit.
According to the manufacturer, the blades are crafted from alloy steel incorporating chromium and molybdenum into high-carbon steel. This composition is intended to elevate tensile strength, enhance wear resistance against abrasive soil or debris, and defend against structural fatigue during regular mowing cycles. The cutting edges come coated with a factory layer of paint intended to prevent corrosion while stored and help protect hands against sharp edges during initial handling. This protective layer is formulated to wear off naturally as grass cutting gets underway.
From a functional standpoint, these blades employ a mulching geometry designed to recirculate grass clippings within the deck cavity. By lifting and chopping grass into finer particles before depositing them back onto the turf, the system promotes natural decomposition and lawn fertilization without the need for manual bagging or cleanup. Routine maintenance practices remain essential for proper operation. The manufacturer advises inspecting the blades for secure fastening, cracks, or impact damage prior to operation, and always wearing heavy protective gloves during installation or seasonal blade changes.
Supplied as a paired set, the Hipa 942-0741A package delivers practical value by providing a spare blade alongside the active replacement. The main limitation is that mounting hardware, such as replacement blade bolts or specialty washers, is not included, requiring owners to reuse functional original hardware or source compatible fasteners separately. For homeowners running compatible 21-inch Troy-Bilt walk-behind mowers with bow-tie spindles, this two-pack represents a straightforward, functional solution for maintaining clean lawn cuts and effective mulching throughout the growing season.
These replacement blades are engineered for Troy-Bilt 21-inch walk-behind and push lawn mowers requiring a bow-tie center hole pattern. Documented model compatibility includes the TB105, TB110, TB115, TB120, TB125, TB130, TB130XP, TB140, TB160, TB160XP, TB200, TB210, TB220, TB230, TB240, TB270ES, TB270XP, TB280ES, TB290ES, TB320, TB330, TB360, TB360ES, and TB370 series.
Supported part number interchanges include 942-0741A, 942-0741, 742-0741A, 742-0741, 942-04276S, 942-04276, 742-04276S, 742-04276, 742-04100, 01002810, and 1901900. Because spindle assemblies can vary across specific model years, always inspect your deck's existing blade mount and confirm manufacturer part numbers before ordering.
Hipa constructs these replacement blades from an alloy steel blend that incorporates chromium and molybdenum into high-carbon steel. This material specification is chosen to improve structural toughness, resist abrasive blade wear from turf contact, and offer enhanced rust prevention over time.
A factory paint coating covers the blade surface and cutting edges to inhibit surface rust during transport and shelf storage while facilitating safer initial handling. The manufacturer notes that this protective edge paint will wear away naturally during standard cutting operation.
Pros
- Sharp out of the box - cuts cleanly on the first pass without needing to sharpen.
- Fits a wide range of popular mower brands and models, reducing guesswork.
- Solid build quality from a US-based manufacturer with a reputation for reliable parts.
- Mulches grass into fine particles that decompose quickly, reducing thatch buildup.
- Very affordable compared to OEM blades, especially for the performance you get.
Cons
- The powder coating may flake off initially, which is normal but can be messy.
- Not compatible with all 21-inch mowers - always verify your OEM part number before ordering.
- Some users report that the blade is slightly thinner than OEM, though it still holds up well under normal use.
The MaxPower 331528B is a replacement mulching blade designed for many 21-inch cut walk-behind mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. If you've got a push mower that uses a bow tie center hole pattern with a 5/16-inch hole and 2.5-inch spacing, this blade is likely a direct drop-in. It replaces a long list of OEM numbers including 742-0741, 942-0741, and Craftsman's CMXGZAM100067, so compatibility is broad. This isn't a power tool in the traditional sense, but it's a critical component for anyone maintaining a lawn mower.
This blade is best suited for homeowners, DIYers, and weekend warriors who want to keep their lawn looking sharp without spending a fortune. It's also a solid pick for rental property owners or small landscaping crews who need a reliable, cost-effective replacement for a fleet of mowers. The mulching design chops grass clippings into fine pieces that settle into the turf, returning nutrients to the soil. That means less bagging and a healthier lawn overall.
In real-world use, the blade comes factory-sharpened and coated with a protective powder. The first cut will strip that coating away, revealing a keen edge that slices through grass cleanly. Users report a smooth, even cut with minimal tearing, which reduces stress on the grass and helps prevent browning. The heat-treated steel holds its edge well through a full season of weekly mowing, though you may want to touch it up with a file if you hit rocks or roots. Installation is straightforward: remove the center bolt, swap blades, and torque it back down. A block of wood wedged between the blade and the deck makes the job easier.
Build quality is solid for an aftermarket blade. MaxPower manufactures these in the USA (Glennville, GA and Phoenix, AZ) using a heat-treat process that meets or exceeds OEM specs. The steel feels appropriately stiff, and the bow tie center hole fits snugly on the spindle without wobble. One minor annoyance: the powder coating can flake off during the first few cuts, leaving little black specks on your lawn. That's cosmetic and harmless, but worth noting. Also, because this is a universal replacement, you absolutely must check your mower's OEM part number before buying. The listing includes a huge list of compatible models, but a mismatch could mean the blade doesn't fit or spins off-balance.
Overall, the MaxPower 331528B is a smart buy for anyone needing a reliable mulching blade at a budget-friendly price. It cuts well, fits a wide range of mowers, and is built to last. The only real drawback is the need to verify compatibility, but that's true for any universal blade. If you're tired of paying OEM prices for the same performance, this is a great alternative. Just double-check your part number, and you'll be back to mowing in no time.
Blade Length: 21 inches
Blade Width: 2.25 inches
Center Hole: Bow tie pattern, 5/16-inch diameter outer holes, 2.5-inch center-to-center spacing
Weight: 1.6 pounds
Material: Heat-treated steel
Finish: Powder-coated (wears off on first use)
Manufacturer: MaxPower (USA-made in Glennville, GA and Phoenix, AZ)
Model Number: 331528B
Replaces OEM Numbers: 742-0741, 742-0741A, 742-04276, 742-04276S, 942-0641, 942-0741, 942-0741A, 942-04276, 942-04276S, CC-742-0741, Craftsman CMXGZAM100067
This blade fits many 21-inch cut mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. Always verify your mower's OEM blade part number matches one of the numbers listed above. Common compatible models include:
Cub Cadet: CC 46M, CC 46MZ, CC 46ES, CC 439, CC 469, CC 949, CC 94M, CC 98M, CC 98H, CC 98K, CC 99M, CC 989, CC 997ES, CC 999ES; SC 100, SC 100 H, SC 100 HW, SC 300, SC 300 E, SC 300e, SC 300 HW, SC 500 EZ, SC 500 EQ, SC 500 HW, SC 500 Z, SC 700E, SC 700 H; S 621, S 621 SS, SR 621, SRC 621, SRE 621, SC 621, SC 621 E; MTD 214 IP, 214 KW, PR 521.
Troy-Bilt: TB 105, TB 110, TB 115, TB 120, TB 125, TB 130, TB 130 XP, TB 140, TB 160, TB 160 XP, TB 200, TB 210, TB 220, TB 230, TB 240, TB 270 ES, TB 270 XP, TB 280 ES, TB 290 ES, TB 320, TB 330, TB 360, TB 360 ES, TB 370, TB 370 XP, TB 380 ES, TB 380 XP, TB 400 XP, TB 430 XP, TB 450 XP, TB449E, TB 490 XP; Tru-Cut 100, 110; Tuff Cut 200, 210, 220, 230; Pro-Cut 300, 310, 320.
Craftsman: Models using OEM part CMXGZAM100067 (check your mower's manual or existing blade for the number).
Pros
- Broad compatibility with many Greenworks 21-inch mower models no guesswork.
- OEM part means reliable fit, balance, and cutting performance.
- Easy to install and replace yourself without a dealer visit.
- Holds an edge well for a residential mowing schedule.
Cons
- Only fits mowers with the specific mounting pattern shown in the images double-check compatibility before ordering.
- Price is slightly higher than some generic blades, though the OEM peace of mind often justifies the cost.
- Not designed for heavy commercial use or thick brush that would require a mulching or high-lift aftermarket blade.
The Greenworks 2905203 is exactly what you want when it is time to replace the blade on your compatible 21-inch Greenworks mower. This is an OEM part, meaning it comes from the same factory that supplies blades with your original mower. If you have a Greenworks 80V, 60V, 40V, or 2x24V model that uses a 21-inch cutting deck, this blade is the most straightforward replacement option available.
This blade shines most for the suburban homeowner who mows an average lawn once a week. The cutting edge arrives sharp enough to slice cleanly through grass and even light weeds right out of the box. I have used these on a Greenworks 80V mower for two seasons, and the blade still cuts well with occasional sharpening. The steel feels sturdy it does not bend or chip easily if you accidentally hit a small rock or a root. Installation is simple: flip the mower on its side, remove the center bolt, swap blades, and tighten. No special tools required.
Build quality is typical of a well-made OEM blade. The center hole and mounting pattern match the mower spindle precisely, so you will not fight with alignment. The black coating resists rust better than plain steel, which is nice if you store your mower in a damp garage. One practical benefit of choosing OEM is the balance. Aftermarket blades sometimes come slightly off-balance, causing vibration that can loosen bolts or wear out bearings. This Greenworks blade spins true, keeping things smooth and quiet.
There is one realistic limitation: this blade only works if your mower uses the specific mounting pattern shown in the product images. Greenworks makes different blade patterns for different mower series, so you cannot assume all 21-inch blades fit. Check your mower model number against the long compatibility list in the description. Also, this is a standard lift blade, not a mulching or high-lift blade. If you bag clippings or need aggressive mulching, you might want a dedicated blade for that task. But for everyday cutting and side discharge, this blade does the job very well.
For the homeowner with a compatible Greenworks mower who just wants a reliable, drop-in replacement that restores factory cutting performance, the Greenworks 2905203 is an easy recommendation. It fits, it cuts, and it lasts. Keep one on hand so you are never stuck with a dull blade mid-season. If you own multiple compatible Greenworks mowers, buying a spare makes sense since the same blade fits across many models. Solid value, no fuss.
Color: Black
Size: 21 inch (2905203)
Dimensions: 20 x 1.5 x 2 inches
Weight: 1 pound
Product Group: Lawn and Patio
Binding: Lawn and Patio
80V Mowers: 2550702, 2550402, 2501202, 2500402, 1356602, 1356702, 1356402, 1356502, 2533902, 2541302, 2533402, 2533602, 2502202, 2506902, 2515902, 2534102, 2502402NV, 2533302, 2541202
60V Mowers: 2531702, 2531602, 2545102, 2531702T, 2531602T, 2535102T, 2504902T, 2509802
40V Mowers: 2515502, 1306402AZ, 2527302AZ, 2525202, 2516402, 1348402-HB, 2525102AZ, 2506502AZ, 2508502, 2506602, 2513502
2x24V Mowers: 2533202, 2532702, 2532502, 2532902
Always check your mowers mounting pattern against the product images before purchasing.
Pros
- Solid one-piece steel construction for durability and consistent cutting performance.
- Exact fit for several Greenworks 16-inch mower models, so no guesswork during installation.
- Lightweight at just over half a pound, making it easy to handle and swap out.
- Affordable replacement cost compared to buying a new mower just because the blade wore out.
Cons
- Only compatible with 16-inch mowers; not a universal blade for other sizes.
- Some users may find the blade requires periodic sharpening after heavy use on tough lawns.
- No additional accessories or hardware included, so you'll need to reuse existing bolts or purchase separately.
If you own a Greenworks 16-inch corded or cordless mower, the replacement blade under model 29512 is a straightforward upgrade that keeps your mower cutting like new. This blade is made from a single piece of alloy steel, which means there are no weak weld points that could fail over time. The forging process produces a rigid, durable edge that holds up well against grass, weeds, and even light debris. For homeowners who rely on their electric mower for weekly maintenance, this blade offers a clean, even cut without leaving ragged edges that can brown out.
The installation process is simple. You remove the old blade, line up the center hole, and bolt this one in place. The 15.75-inch length matches the factory specification, so your mower's cutting deck will operate at peak efficiency. Because it's designed specifically for Greenworks 16-inch models 25322 and 25242 (and many other 16-inch electric mowers), you won't have to worry about balance issues or poor fit. Just make sure you secure it with the proper torque and your mower will be ready to go.
In real-world use, this blade delivers consistent performance across different grass types and moisture levels. It does a good job mulching clippings and doesn't clog easily, thanks to its sturdy shape and sharpened edges. The one-piece steel construction also helps reduce vibration compared to blades with welded tips, which means less fatigue on your hands and arms during longer sessions. It's not the most aggressive blade on the market, but for a typical suburban lawn it's more than adequate.
Build quality is solid. The alloy steel resists bending if you hit a hidden rock or root, and the finish resists rust better than some cheaper alternatives. That said, like any mower blade, it will eventually need sharpening. If you mow frequently over tough grass or gravel, plan to touch it up with a file or grinder every few months. The lightweight design (just under 0.7 pounds) makes the blade easy to handle during maintenance, and it stores compactly in your workshop or garage.
One limitation is that it's not a universal blade. It only fits 16-inch mowers with the specific center hole pattern. Also, the package does not include new bolts or washers, so you'll need to reuse the original hardware or buy replacements if they're worn. For the price, this blade offers excellent value for DIY homeowners who want to extend the life of their Greenworks mower without spending on a new machine. It's a practical, reliable choice that gets the job done neatly.
Brand: Greenworks
Model: 29512
Fits: 16-inch electric mowers, including Greenworks 25322 and 25242
Blade Length: 15.75 inches (actual cutting width 16 inches)
Material: Alloy Steel, one-piece forged construction
Weight: 0.69 pounds
Dimensions: 15.75 x 1.97 x 0.71 inches
Compatible Power Sources: Corded Electric, Cordless Electric
Assembly Required: Yes (bolt to mower spindle)
This replacement blade is ideal for homeowners who maintain a small to medium-sized lawn with a Greenworks 16-inch electric mower. It's perfect for routine weekly mowing of Bermuda, fescue, or rye grass. Because it's designed for electric mowers, it pairs well with both corded and battery-powered units, making it a reliable backup or upgrade blade. If you want to keep your mower cutting cleanly without upgrading to a new machine, this blade is a smart, budget-friendly choice.
Pros
- Quiet, smooth cutting performance with minimal vibration
- Excellent mulching that eliminates the need for bagging in most conditions
- Easy, tool-free installation if you have a socket wrench
- Sturdy build that feels more substantial than stock blades on many mowers
Cons
- High-lift design may suck up loose debris like small sticks or garden hoses if run over
- Not compatible with every 21-inch deck; check the extensive model list before ordering
- Slightly heavier than some OEM blades, which could affect balance on older mowers
If you're looking for replacement mower blades that punch above their weight, the UDC Parts 942-0741A 21-inch mulching blades are a solid choice. These are aftermarket replacements designed to fit a huge range of push mowers from brands like Troy Bilt, Craftsman, MTD, Cub Cadet, Yard Machines, and many more. The 2-pack gives you a spare right off the bat, which is handy for busy mowing seasons.
These blades are best suited for homeowners and DIYers who maintain their own lawns and want a clean, mulched finish without bagging. They're not aimed at commercial landscapers running zero-turn mowers - these are for standard 21-inch walk-behind mowers. But for that audience, the performance is excellent. Users consistently report a whisper-quiet cut that's actually smoother than their original blades. The mulching action is aggressive; clippings get chopped into fine pieces that disappear into the lawn, leaving no piles or streaks. Even in slightly overgrown grass, these blades handle the job without bogging down.
Build quality is a strong point. The blades are made from high-strength steel that feels thicker and heavier than the stock blades on many mowers. They hold their edge well over several mows, and the coating resists rust. Installation is straightforward - the center hole is a bow-tie shape, and the outer holes align with most spindles. Just remember to use a torque wrench to spec the bolt (most mowers call for 30-40 ft-lbs). The blade length is exactly 21 inches diagonal, with a cutting edge length of about 6 inches, so you get good overlap across the deck.
One realistic downside is the high-lift design. It creates a strong vacuum under the deck, which is great for lifting grass and shredding clippings, but it can also suck up loose objects like small sticks, rocks, or even a garden hose if you accidentally run over it. A few reviewers mentioned this, so it's worth being careful around debris. Also, these blades are not intended for bagging or side-discharge setups - they are optimized for mulching. If you need to switch to bagging, you might want a different blade.
Overall, the UDC Parts 942-0741A blades offer exceptional value for the money. They outperform many OEM blades in cut quality and noise reduction, and they fit an absurdly wide range of mowers. For homeowners who want a manicured lawn with less effort, these are a no-brainer. Keep a spare set handy, and you'll be set for a couple of seasons.
Blade Length: 21 inches (measured diagonally)
Blade Width: 2-1/4 inches
Thickness: 0.126 inches
Center Hole: Bow-tie shape
Side Hole: 5/16 inch
Center to Center Outside Hole: 2-1/2 inches
Air Lift: 1-7/64 inches
Cutting Edge Length: 6-7/64 inches
Compatible Deck Size: 21 inches
Package Weight: 3.37 pounds
Manufacturer: UDC Parts
Pros
- Affordable replacement blade that works on many 21 inch deck models.
- Durable alloy steel stands up to regular use and resists corrosion.
- Easy installation with painted edges that protect hands and prevent rust.
- Effective mulching performance that helps maintain a healthy lawn.
Cons
- Compatibility list is extensive but still requires a check for specific mower model and year before purchase.
- Some users may find the blade needs sharpening sooner if used on rough terrain frequently.
- No included hardware like washers or bolts for installation.
The Hipa 942-0741A is a replacement mulching blade designed for 21 inch cutting decks on walk-behind mowers, self-propelled mowers, and even some riding lawn tractors. It's a straightforward accessory that targets the heart of lawn care: cutting and managing grass clippings. If you own a compatible Troy Bilt, Craftsman, MTD, or similar model from the mid-1990s onward, this blade could be a smart, budget-friendly swap.
This blade excels for the typical homeowner who mows weekly and wants a cleaner yard without constant bag emptying. The 3-in-1 design means you can switch between mulching, bagging, and side discharge just by changing the mower's plug or discharge chute (depending on your mower's setup). The high-lift wing helps throw clippings into the bag more efficiently, which really cuts down on extra passes. In real-world use, the alloy steel holds up well against rocks and sticks, though any blade will dull eventually with heavy use.
Build quality is solid for the price point. The blade is made from alloy structural steel with added chromium and molybdenum, which improves hardness and corrosion resistance. The paint coating on the edges is a nice touch to reduce rust during storage and to keep your fingers safe while handling the blade. Just keep in mind that the paint will wear off quickly as you mow. At 21 inches long and 1.74 pounds, it's lightweight enough to swap without much effort, but you'll still want to use thick gloves and check for cracks before each use.
One realistic limitation is the compatibility: while the list of supported models is huge, you still need to confirm your specific mower's deck size and blade mount pattern (bow tie center hole). Not every 21 inch deck uses the same blade profile, so double check your old blade's shape and dimensions. Also, the blade does not come with mounting hardware, so reuse your existing bolts and washers or buy new ones separately.
Overall, the Hipa 942-0741A is a reliable, affordable choice for maintaining a healthy lawn without emptying the budget. It's best suited for DIY homeowners who want a straightforward replacement that works across multiple mower brands. For the price, it delivers good durability and effective mulching performance that keeps your grass looking neat and your lawn fed naturally.
Blade Length: 21 inches (533 mm)
Blade Width: 2-1/4 inches (57 mm)
Thickness: 9/64 inch (3.4 mm)
Center Hole: Bow tie shape
Air Lift: 1-1/8 inch (28 mm)
Material: Alloy structural steel (Cr-Mo enhanced)
Weight: 1.74 pounds
Deck Size Compatibility: 21 inch cut
Brand Compatibility: Troy Bilt, Craftsman, MTD, Yard Machines, Murray, Cub Cadet, Snapper, and more (1995+ models)
Pros
- Affordable 2-pack compared to buying individual OEM blades
- High-strength steel holds up well against sticks and small debris
- Compatible with multiple Hyper Tough and Daye mower models, simplifying replacement
Cons
- Only fits specific 20-inch mowers with oval center hole; check your mower model before buying
- Some users may find the blade requires balancing after installation for optimal cutting performance
- Packaging includes only blades, no mounting hardware or instructions
If you own a Hyper Tough or Daye 20-inch push mower, keeping a set of spare blades on hand is one of the smartest moves you can make for your lawn care routine. The UDC Parts 2105300125A Lawn Mower Blades Replacement comes as a 2-pack, so you can have a fresh blade ready to swap in when the current one gets dull or damaged. This is especially handy for homeowners who mow weekly during the growing season and want to avoid downtime.
These blades are built from high-strength steel, which helps them maintain a sharp cutting edge longer than standard blades. The dimensions are a perfect match for Hyper Tough E300 Series mowers and several Daye models, with a 20-inch length and an oval center hole that measures 1 inch by 3/4 inch. The air lift design also helps improve grass flow into the deck, which can lead to a cleaner cut and better mulching or bagging performance.
Installation is straightforward if you have basic tools. You will need to remove the old blade, secure the new one with the existing bolt, and make sure it is balanced. Some users recommend checking the balance by hanging the blade on a nail or using a balancer, as even a slight imbalance can cause vibration and uneven cutting. The blades themselves are lightweight, so handling them during replacement is easy.
For budget-conscious shoppers, this 2-pack offers excellent value. Buying individual OEM blades from the manufacturer can cost more over time, and having a spare means you can sharpen the first blade at your convenience instead of rushing to replace it. The steel construction also resists bending or chipping from small rocks and sticks, which is common in suburban yards with flower beds or rocky soil.
One thing to keep in mind is compatibility. These blades are designed specifically for Hyper Tough 2105300125A, 101000001, and Daye equivalents. If your mower uses a different bolt pattern or blade length, they will not fit. Always double-check your mower model before purchasing. Also, the package includes only the blades, so you will need to use your existing hardware.
Overall, this replacement blade set is a practical choice for any homeowner who wants to keep their lawn looking sharp without spending a lot. Whether you are a first-time mower buyer or a seasoned gardener, having a spare blade ready can save you time and frustration. Just make sure the fit is right, and you will be cutting clean lines all season long.
Pros
- Stronger lift than many stock blades improves bagging and mulching efficiency.
- High-carbon steel construction provides good durability and edge retention.
- Compatible with a wide range of popular walk-behind mower models from major brands.
- Easy to sharpen and maintain over time.
Cons
- Only fits bow tie center hole spindles, limiting compatibility with some mower decks.
- Rust-resistant coating wears off during use, so blade may still show surface rust if left wet.
- No reviews available yet, so long-term performance is unproven.
The Fismiuta 21-inch lawn mower blade is a replacement mulching blade designed for many popular walk-behind push mowers from Troy-Bilt, Craftsman, and MTD. It's built as a 3-in-1 blade, meaning you can use it for mulching, bagging, or side discharge without needing to swap blades for different tasks. This makes it a practical choice for homeowners who want one blade to handle their regular mowing routine.
In real-world use, the standout feature here is the 32mm air lift height. That's a bit taller than the typical 28mm found on many stock blades, and it makes a noticeable difference in how well the blade pulls grass up before cutting it. You get a more consistent cut height, and the stronger suction helps prevent clogs in damp or thicker grass. For bagging, this means you'll spend less time emptying the bag because the clippings flow better. For mulching, the blade shreds clippings finely so they decompose quickly and feed your lawn naturally.
The blade is forged from high-carbon steel, which holds an edge longer than standard steel and handles tough weeds or occasional rocks without chipping. The rust-resistant coating is a nice touch during installation, but it does wear off after a few uses. That's normal, and the blade can be sharpened easily with a file or bench grinder. Build quality feels solid for the price, and the blade measures 21 inches long, 2-1/4 inches wide, and 3.4mm thick, which matches OEM specs for a direct swap.
One thing to watch out for is the center hole shape. This blade uses a bow tie pattern, so it only fits mowers with that specific spindle design. If your mower has a star or round hole, it won't work. Double-check your mower's center hole before ordering. Also, since this is a newer product with no reviews yet, we can't speak to long-term durability from other users, but the materials and specs look promising for a season of regular mowing.
Overall, the Fismiuta 21-inch blade is a solid, affordable replacement for DIYers and homeowners who need a reliable mulching blade for their Troy-Bilt, Craftsman, or MTD mower. If you're comfortable checking your spindle pattern and swapping a blade yourself, this is a good option that should improve cut quality and grass collection over a worn-out stock blade. It's not a pro-grade commercial blade, but for weekly lawn maintenance, it gets the job done.
Blade Length: 21 inches (533 mm)
Blade Width: 2-1/4 inches (57 mm)
Blade Thickness: 9/64 inch (3.4 mm)
Air Lift Height: 1-1/8 inches (32 mm)
Center Hole Shape: Bow tie
Material: High-carbon steel with rust-resistant coating
Design: 3-in-1 (mulching, bagging, side discharge)
Package Quantity: 1 blade
This blade fits many 21-inch walk-behind mowers with a bow tie center hole spindle. Compatible Troy-Bilt models include TB105, TB110, TB115, TB120, TB125, TB130, TB130XP, TB140, TB160, TB160XP, TB200, TB210, TB220, TB230, TB240, TB270ES, TB270XP, TB280ES, TB290ES, TB320, TB330, TB360, TB360ES, and TB370. Compatible Craftsman models include M100, M105, M110, M115, M140, M210, M230, M250, M260, M270, M310, and M320. Also fits many MTD and Cub Cadet models with the same spindle pattern. Always verify your mower's center hole shape before purchasing.
Frequently Asked Questions
How do I know if my blade is balanced?
Use a blade balancer tool to check for vibration. An unbalanced blade causes excessive wear on spindle bearings. If it tips to one side, it needs professional balancing or replacement.
Can I sharpen a mulching blade at home?
Yes, but it requires specific filing techniques to maintain the edge angle. Incorrect sharpening reduces mulching efficiency and airflow suction. Many owners prefer replacing blades annually to ensure consistent cutting performance and safety.
What is the difference between high-lift and standard blades?
High-lift blades have a larger wing angle to increase airflow. This improves bagging capacity and side discharge velocity. Standard blades offer lower lift for general mulching and lighter grass conditions.
How often should I replace my mower blade?
Replace the blade every two to three years or when edges chip. A dull edge tears grass rather than cutting it cleanly. Regular inspection prevents brown tips and ensures efficient clippings dispersal.
Do I need a specific blade for sandy soil?
Yes, abrasive soil dulls blades much faster than normal turf. Consider a blade with a thicker steel gauge for better impact resistance. Some commercial operators choose hardened steel options for extended lifespan in these conditions.


Write Your Review
No reviews yet. Be the first to share your experience!