Riding Mower Blade on Sale of 2026 For Cleaner Cuts

The UDC Parts 942-04308 lawn mower blades are a direct replacement set designed for 42-inch decks that use a 6-point star center hole. Despite being a simple blade swap, these high lift mulching blades completely transform the mowing experience. They fit a wide range of popular riding mowers from Cub Cadet, Craftsman, Troy Bilt, MTD, and others, making them a versatile upgrade for homeowners and DIYers alike.

In real-world use, the standout feature is the mulching capability. The high lift design creates a strong vacuum that stands grass up for a clean cut and then shreds clippings into fine particles that disappear into the lawn. Users report a dramatic reduction in visible clippings, often eliminating the need for bagging. The blades also run noticeably quieter than typical blades, producing a low hum rather than a roar. This is a huge plus for anyone mowing near neighbors or early in the morning.

Build quality is impressive for the price. The blades are made from thicker, heat-treated steel that feels sturdier than many OEM replacements. They come pre-sharpened under a protective coating that wears off during the first mow. After that, you can resharpen them several times to extend their life. Installation is straightforward just remove the old blades, align the 6-point star, and bolt the new ones on. No adapters or modifications needed.

One realistic drawback is the high lift design itself. Because it creates such strong suction, it can pick up sand or loose dirt if you mow over bare spots. This can dull the blades faster and may kick up debris. Also, these blades only fit decks with a 6-point star center hole, so you must double-check your mower's spindle before buying. But for the vast majority of compatible mowers, these blades deliver a superior cut with less noise and less cleanup.

Overall, the UDC Parts 942-04308 blades offer outstanding value for anyone with a 42-inch riding mower. They outperform many OEM blades at a lower cost, and the two-pack means you have a spare ready to go. Whether you're a weekend warrior or a dedicated lawn enthusiast, these blades will give you a cleaner, quieter, and more efficient mowing experience.

Length: 21-1/4 inches (measured diagonally)

Width: 2-1/2 inches

Thickness: 0.157 inches

Center Hole: 6-point star

Side Hole: 3/8 inch

Center to Center Outside Hole: 3 inches

Air Lift: 1-7/64 inches

Cutting Edge Length: 6-57/64 inches

Compatible Deck Size: 42 inches

Package Includes: 2 blades

Replaces OEM part numbers: 942-04308, 942-04308A, 942-04312, 942-04308-X, 942-04312A, 742-04308, 742-04308A, 742-04312, 742-04312A, 942-0656, 742-0656, 490-110-C108, 490-110-C109, 490-110-M108, CMXGZAM110108, OCC-742-04312, OEM-742-04308.

Fits 42-inch decks on Cub Cadet (LTX1040, XT1, XT2, Ultima ZT1, RZT), Craftsman (T series, LT series, Z series), Troy Bilt (Pony, Bronco, Horse, Mustang), MTD, Yard Machines, Yard-Man, Columbia, Murray, Huskee, MasterCut, White Outdoor, and more. Always verify your mower model number and deck type before ordering.

If you own a 42-inch deck riding mower from Craftsman, Husqvarna, or Poulan Pro and need fresh blades, the Grasscool 138971 replacement set is worth a close look. These are high lift blades designed for better grass discharge and a cleaner cut, especially in thicker or damp conditions. They come with a 5-point star center hole that matches many popular models including the Craftsman T110, LT1000, LT2000, and Husqvarna YTH18542. Before ordering, double check that your mower uses a 5-point star adapter, not a 6-point, because these won't swap over.

Performance wise, these blades do exactly what you'd expect. They slice through grass cleanly and the high lift design helps toss clippings into the bag or out the chute without leaving clumps behind. Multiple reviews mention that the blades are balanced well out of the box, which means minimal vibration during operation. That's a big plus for comfort and for reducing wear on the spindle assembly. For homeowners and DIYers cutting a couple of acres weekly, these hold up nicely. The steel is heat treated and the cutting edges come with a protective paint coating that resists rust, though it will wear off after a few mowings as the blades do their job.

Build quality is solid at this price point. Grasscool puts these through hardness, balance, and performance tests, and that shows in the consistency of the product. The blades are slightly thicker than some OEM options, which adds stiffness but might add a little extra weight. For most riders that won't matter, but if your mower is on the lighter side you may notice a small difference in engagement feel. Installation is straightforward if you're comfortable with a socket wrench, and the blades line up perfectly with the 5-point star pattern.

One realistic limitation is the star point compatibility. There are two common patterns for these Craftsman-style mowers, and ordering the wrong one is a common mistake. Also, a few users noted that on Poulan Pro models the fit can be a bit tight, so measure carefully. That said, the vast majority of buyers report a perfect fit and improved cutting performance over worn OEM blades.

Overall, the Grasscool 138971 high lift blades are a smart buy for anyone who wants reliable performance without spending top dollar. They're best suited for homeowners, DIYers, and light commercial users who maintain their own equipment. If you confirm the 5-point star pattern and match your model from the compatibility list, you'll get smooth operation and a clean lawn at a fraction of the cost of name-brand replacements.