Lawn Mower Blade Price of 2026: Clean-Cut Picks

The Greenworks 2905203 is exactly what you want when it is time to replace the blade on your compatible 21-inch Greenworks mower. This is an OEM part, meaning it comes from the same factory that supplies blades with your original mower. If you have a Greenworks 80V, 60V, 40V, or 2x24V model that uses a 21-inch cutting deck, this blade is the most straightforward replacement option available.

This blade shines most for the suburban homeowner who mows an average lawn once a week. The cutting edge arrives sharp enough to slice cleanly through grass and even light weeds right out of the box. I have used these on a Greenworks 80V mower for two seasons, and the blade still cuts well with occasional sharpening. The steel feels sturdy it does not bend or chip easily if you accidentally hit a small rock or a root. Installation is simple: flip the mower on its side, remove the center bolt, swap blades, and tighten. No special tools required.

Build quality is typical of a well-made OEM blade. The center hole and mounting pattern match the mower spindle precisely, so you will not fight with alignment. The black coating resists rust better than plain steel, which is nice if you store your mower in a damp garage. One practical benefit of choosing OEM is the balance. Aftermarket blades sometimes come slightly off-balance, causing vibration that can loosen bolts or wear out bearings. This Greenworks blade spins true, keeping things smooth and quiet.

There is one realistic limitation: this blade only works if your mower uses the specific mounting pattern shown in the product images. Greenworks makes different blade patterns for different mower series, so you cannot assume all 21-inch blades fit. Check your mower model number against the long compatibility list in the description. Also, this is a standard lift blade, not a mulching or high-lift blade. If you bag clippings or need aggressive mulching, you might want a dedicated blade for that task. But for everyday cutting and side discharge, this blade does the job very well.

For the homeowner with a compatible Greenworks mower who just wants a reliable, drop-in replacement that restores factory cutting performance, the Greenworks 2905203 is an easy recommendation. It fits, it cuts, and it lasts. Keep one on hand so you are never stuck with a dull blade mid-season. If you own multiple compatible Greenworks mowers, buying a spare makes sense since the same blade fits across many models. Solid value, no fuss.

Color: Black
Size: 21 inch (2905203)
Dimensions: 20 x 1.5 x 2 inches
Weight: 1 pound
Product Group: Lawn and Patio
Binding: Lawn and Patio

80V Mowers: 2550702, 2550402, 2501202, 2500402, 1356602, 1356702, 1356402, 1356502, 2533902, 2541302, 2533402, 2533602, 2502202, 2506902, 2515902, 2534102, 2502402NV, 2533302, 2541202

60V Mowers: 2531702, 2531602, 2545102, 2531702T, 2531602T, 2535102T, 2504902T, 2509802

40V Mowers: 2515502, 1306402AZ, 2527302AZ, 2525202, 2516402, 1348402-HB, 2525102AZ, 2506502AZ, 2508502, 2506602, 2513502

2x24V Mowers: 2533202, 2532702, 2532502, 2532902

Always check your mowers mounting pattern against the product images before purchasing.

The EGO POWER+ AB2100 replacement blade is a genuine OEM part built specifically for EGO's line of 21-inch cordless mowers, including the LM2100, LM2101, LM2102SP, LM2100SP, and LM2142SP models. This is not an aftermarket clone but a factory-engineered blade designed to restore or even improve your mower's cutting performance. Whether you are a homeowner maintaining a suburban lot or a property manager handling multiple lawns, this blade delivers consistent, reliable results.

In real world use, the standout feature is suction. Many users report that this blade dramatically improves lift, pulling up matted grass and leaves that older blades simply blow over. It handles bagging, mulching, and side discharge equally well thanks to its true 3-in-1 design. The factory-sharpened steel cuts cleanly, reducing frayed grass tips that can turn brown after mowing. It also powers through fall leaf cleanup with ease, allowing you to skip raking entirely in many cases.

Build quality is solid. The blade is robust enough to handle rocky terrain and occasional hidden debris without bending or chipping prematurely. Installation is straightforward, a simple bolt-on process that takes minutes. Just be sure to install it with the cutting edge facing the right direction. A common mistake is mounting it backward, which kills suction and performance.

There are a few trade-offs to consider. Because this blade generates more lift, it does create more noise than the standard blade. It also consumes more battery power, especially when cutting thick, tall grass. Some users note the factory edge is not perfectly sharp out of the box and recommend a quick pass with a file or sharpening stone before first use. However, these minor drawbacks are easily outweighed by the performance gains.

Overall, the EGO AB2100 is an excellent upgrade for any compatible EGO mower. If you have been disappointed by poor bag fill or stragglers left behind, this blade is the fix. It is a worthwhile investment for homeowners who want a crisp, clean cut and efficient leaf management without moving up to a gas mower.

Brand: EGO Power+

Model Number: AB2100

Blade Type: 3-In-1 Mulching, Bagging, Side Discharge

Cutting Width: 21 Inches

Material: Factory Sharpened Steel

Item Weight: 1.1 Pounds

Compatible Mower Models: LM2101, LM2100, LM2102SP, LM2100SP, LM2142SP

Assembly Required: No

UPC: 692042006142

This blade is ideal for homeowners with medium to large lawns who want the convenience of a single blade for all mowing tasks. It excels at bagging clippings in thick grass and mulching leaves in the fall. It also works well for those who maintain rental properties or small commercial lawns with EGO mowers, providing reliable performance across varied terrain.

If you own a Greenworks 16-inch corded or cordless mower, the replacement blade under model 29512 is a straightforward upgrade that keeps your mower cutting like new. This blade is made from a single piece of alloy steel, which means there are no weak weld points that could fail over time. The forging process produces a rigid, durable edge that holds up well against grass, weeds, and even light debris. For homeowners who rely on their electric mower for weekly maintenance, this blade offers a clean, even cut without leaving ragged edges that can brown out.

The installation process is simple. You remove the old blade, line up the center hole, and bolt this one in place. The 15.75-inch length matches the factory specification, so your mower's cutting deck will operate at peak efficiency. Because it's designed specifically for Greenworks 16-inch models 25322 and 25242 (and many other 16-inch electric mowers), you won't have to worry about balance issues or poor fit. Just make sure you secure it with the proper torque and your mower will be ready to go.

In real-world use, this blade delivers consistent performance across different grass types and moisture levels. It does a good job mulching clippings and doesn't clog easily, thanks to its sturdy shape and sharpened edges. The one-piece steel construction also helps reduce vibration compared to blades with welded tips, which means less fatigue on your hands and arms during longer sessions. It's not the most aggressive blade on the market, but for a typical suburban lawn it's more than adequate.

Build quality is solid. The alloy steel resists bending if you hit a hidden rock or root, and the finish resists rust better than some cheaper alternatives. That said, like any mower blade, it will eventually need sharpening. If you mow frequently over tough grass or gravel, plan to touch it up with a file or grinder every few months. The lightweight design (just under 0.7 pounds) makes the blade easy to handle during maintenance, and it stores compactly in your workshop or garage.

One limitation is that it's not a universal blade. It only fits 16-inch mowers with the specific center hole pattern. Also, the package does not include new bolts or washers, so you'll need to reuse the original hardware or buy replacements if they're worn. For the price, this blade offers excellent value for DIY homeowners who want to extend the life of their Greenworks mower without spending on a new machine. It's a practical, reliable choice that gets the job done neatly.

Brand: Greenworks
Model: 29512
Fits: 16-inch electric mowers, including Greenworks 25322 and 25242
Blade Length: 15.75 inches (actual cutting width 16 inches)
Material: Alloy Steel, one-piece forged construction
Weight: 0.69 pounds
Dimensions: 15.75 x 1.97 x 0.71 inches
Compatible Power Sources: Corded Electric, Cordless Electric
Assembly Required: Yes (bolt to mower spindle)

This replacement blade is ideal for homeowners who maintain a small to medium-sized lawn with a Greenworks 16-inch electric mower. It's perfect for routine weekly mowing of Bermuda, fescue, or rye grass. Because it's designed for electric mowers, it pairs well with both corded and battery-powered units, making it a reliable backup or upgrade blade. If you want to keep your mower cutting cleanly without upgrading to a new machine, this blade is a smart, budget-friendly choice.

This Greenworks replacement lawn mower blade is purpose-built for the company's 19-inch corded and cordless electric mowers. It's not a universal blade - it's a direct OEM-style replacement for models like 2501302, 2500502, 25223, 25272, and 25292. If you own one of those mowers, this blade bolts right on with no filing or drilling.

Who should buy this? Homeowners who rely on a Greenworks 19-inch mower for their lawn care. Whether you're using the corded version for a small yard or the cordless for a medium lot, this blade keeps your mower cutting cleanly. It's a straightforward swap that restores cutting performance when the original gets dull or damaged.

Performance-wise, the blade is forged from a single piece of alloy steel, which gives it good rigidity and longevity. The grind on the cutting edge is sharp right out of the box and provides a clean slice through grass, reducing tearing and promoting healthier turf. The 17.72-inch actual length matches the mower deck precisely, so you get full cutting width without leaving uncut strips.

Build quality is solid for the price. The steel won't bend easily under normal use, and the black finish offers some corrosion resistance though it's not a coated blade. At 16 ounces, it's light enough to handle without strain during installation. You'll need a socket or wrench to remove the center bolt, but the process is simple and well within reach of a DIY homeowner.

One realistic drawback is compatibility - it only works on Greenworks 19-inch models, so no mixing with other brands. Also, being bare steel, it will rust if you leave it wet after mowing. Rinsing and drying before storage takes a minute but extends blade life. Overall, this is a reliable, affordable replacement that keeps your Greenworks mower running efficiently season after season.

Brand: Greenworks
Model Number: 29373
Blade Length: 17.72 inches
Cutting Width (Mower): 19 inches
Material: Alloy Steel
Weight: 16 ounces
Compatible Mower Models: 2501302, 2500502, 25223, 25272, 25292
Power Source: Corded Electric / Cordless (depends on mower)
Assembly Required: Yes (bolt-on installation)
Color: Black

The SporGain Lawn Mower Blade Sharpener is a handy tool accessory that turns your angle grinder into a dedicated blade sharpening station. It's designed for DIYers and homeowners who prefer to keep their mower blades sharp without the hassle of manual filing or the expense of professional sharpening. If you have a standard right-angle grinder, this accessory can handle the job quickly and accurately.

In real-world use, the adjustable frame is the standout feature. You can set the sharpening angle anywhere from 15 to 45 degrees, which covers most lawn mower blades, including standard straight, mulching, and high-lift types. The ball bearing handle makes it easy to guide the grinder across the blade edge smoothly, reducing vibration and hand fatigue. During testing, it took only a few minutes per blade to restore a sharp edge, and the results were consistent across multiple blades.

Build quality is solid. The aluminum alloy frame feels sturdy, and the mounting hardware included (4 adapter screws) fits most angle grinders without wobble. Setting it up on a workbench is straightforward, though you might need to tweak the thumb screws initially to get the angle perfect. The tool also works for both right-hand and left-hand blades, so you don't have to flip the setup for different mowers.

One realistic drawback is that you need an angle grinder to use it, so if you don't already own one, factor in that extra cost. Also, this sharpener is specifically for lawn mower blades, not for other types of cutting tools like chisels or knives. Some users might find the initial angle adjustment a bit fiddly, but once set, it stays put.

Overall, the SporGain Blade Sharpener is a smart buy for anyone who maintains their own lawn equipment. It pays for itself after a few uses by prolonging blade life and improving cutting performance. If you already own an angle grinder and want a precise, repeatable way to sharpen mower blades, this tool is worth adding to your workshop. Just be prepared to invest a few minutes in the initial setup.

Product Dimensions: 13.5 x 9 x 3.4 inches

Item Weight: 2.99 pounds

Adjustable Angle: 15 to 45 degrees

Material: Aluminum alloy frame with ball bearing handle

Compatibility: Works with most angle grinders (fits through 4 adapter screws)

Included in Box: Sharpener frame, ball bearing handle, 4 adapter screws, thumb screws

The SporGain Lawn Mower Blade Balancer is exactly what it sounds like: a no-nonsense tool for ensuring your mower blades are balanced after sharpening. For anyone who sharpens their own blades whether you maintain a small suburban yard or a handful of rental properties, this little gadget is a sanity saver. After you take a grinder or file to your blade, you often end up with one side slightly heavier. That imbalance causes vibration, uneven cuts, and extra wear on your mower’s engine and deck.

This balancer solves that problem simply. You set the blade on the tapered metal cone, and the heavy side drops down. Then you remove a bit more metal from that side and repeat until the blade sits level. It’s a static balancer, meaning it relies on gravity and a smooth pivot point. It may not be as sensitive as magnetic models or as precise as electronic ones, but for typical lawn mowing work, it gets the job done. The cone has steps to accommodate different center hole sizes up to nearly two inches, so it fits most standard walk-behind mower blades and even some riding mower blades.

Build quality is impressive for the price. The base and cone are made of metal, not plastic, so they won’t crack or warp. It’s small enough to toss in a tool bag or leave in a drawer. The only potential drawback is that it won’t work with blades that have non-circular holes like some gator or mulching blades with keyed centers. Also, if your blade is truly bent or has uneven wear, the balancer will show that, but you might need to replace the blade rather than simply balance it.

In real-world use, this balancer makes a noticeable difference. Users report that after balancing blades that came off the shelf from the factory, they felt less vibration in the handles and heard a smoother running engine. One reviewer with a Honda HRX mower found that balancing blades he thought were fine completely eliminated a subtle vibration he never realized was there. For the money, you’re getting a simple, effective way to improve cut quality and extend your equipment’s life.

If you’re a weekend DIYer or a homeowner who sharpens your own blades, this balancer is a cheap upgrade that pays for itself in less engine wear. Professional landscapers who need absolute precision on multiple mowers might prefer a magnetic model, but for most people, this static balancer does exactly what it needs to. A solid buy.

Product Dimensions: 2.4 x 2.4 x 2.1 inches
Item Weight: 3.52 ounces
Material: Metal (zinc alloy base and cone)
Blade Hole Compatibility: Circular center holes up to 1.97 inches (largest step)
Base Diameter: 2.36 inches
Color: Silver
Includes: One blade balancer only

The SHARPAL 103N is a purpose-built handheld sharpener that stands out for its versatility. It’s not a bench stone or an electric grinder, it’s a compact tool designed to handle a surprising range of edge maintenance tasks around the shop, garden, and home. With five sharpening surfaces, it can tackle lawn mower blades, axes, machetes, pruning shears, hedge trimmers, scissors, and most kitchen knives. That kind of flexibility makes it a real asset for anyone who keeps multiple cutting tools in rotation.

This sharpener is best suited for DIYers, homeowners, and light commercial users who want to keep their gear cutting cleanly without spending a lot of time or money. It’s not meant for heavy duty reprofiling or restoring badly damaged edges, but for routine sharpening and touch ups it works very well. The preset angle slots take the guesswork out of holding the blade at the right orientation, which is especially helpful for people who aren’t comfortable with a stone or file.

In use, the 103N feels solid and secure. The rubber over-molded base grips the workbench or tabletop, so it stays put while you draw the blade through the slot. The handle is big enough to use comfortably with gloves, and the hand guard is a thoughtful safety feature when working on mower blades or shears. Performance wise, the tungsten carbide slot removes material quickly and the ceramic slot refines the edge to a clean, functional sharpness. Most users report noticeably better cutting from their tools after just a few passes.

Build quality is good for the price point. The plastic housing feels durable, and the abrasive inserts are rated to last through many thousands of uses. There are no batteries or cords to worry about, and the whole unit weighs only a few ounces, so it’s easy to store in a drawer or toolbox. Some reviewers mention that very dull or thick mower blades may need more passes or a secondary method to get a true edge, but for regular upkeep this tool performs reliably.

If you are tired of paying for sharpening services or struggling with stones and files, the SHARPAL 103N is a practical, cost effective alternative. It pays for itself quickly if you maintain your own mower blades, pruners, and shears. For the price and versatility, it’s a solid addition to any workshop or garage.

Brand: SHARPAL
Model: 103N
Dimensions: 8.46 x 2.95 x 1.34 inches
Weight: 6.2 ounces (176 grams)
Materials: Tungsten carbide and ceramic abrasives
Grit types: Coarse, medium, fine
Number of sharpening slots: 5 preset angle guides
Color: Orange and black
Warranty: 3 years

Lawn Mower Blade Touch Ups: Use the dedicated carbide slot to quickly restore a clean cutting edge without removing the blade from the mower (if accessible) or with the blade removed on a bench. Ideal for seasonal maintenance.

Garden Shears and Pruners: The pre-set angle slots make it easy to sharpen bypass pruners, hedge shears, and loppers. A few passes bring back factory sharpness.

Axes and Hatchets: The broader slots accommodate thicker blades and axes. Great for campsite or woodlot tool upkeep.

Kitchen and Utility Knives: The fine ceramic slot refines knife edges for clean slicing. Works well on most straight edge kitchen blades.

The Fismiuta 21-inch lawn mower blade is a replacement mulching blade designed for many popular walk-behind push mowers from Troy-Bilt, Craftsman, and MTD. It's built as a 3-in-1 blade, meaning you can use it for mulching, bagging, or side discharge without needing to swap blades for different tasks. This makes it a practical choice for homeowners who want one blade to handle their regular mowing routine.

In real-world use, the standout feature here is the 32mm air lift height. That's a bit taller than the typical 28mm found on many stock blades, and it makes a noticeable difference in how well the blade pulls grass up before cutting it. You get a more consistent cut height, and the stronger suction helps prevent clogs in damp or thicker grass. For bagging, this means you'll spend less time emptying the bag because the clippings flow better. For mulching, the blade shreds clippings finely so they decompose quickly and feed your lawn naturally.

The blade is forged from high-carbon steel, which holds an edge longer than standard steel and handles tough weeds or occasional rocks without chipping. The rust-resistant coating is a nice touch during installation, but it does wear off after a few uses. That's normal, and the blade can be sharpened easily with a file or bench grinder. Build quality feels solid for the price, and the blade measures 21 inches long, 2-1/4 inches wide, and 3.4mm thick, which matches OEM specs for a direct swap.

One thing to watch out for is the center hole shape. This blade uses a bow tie pattern, so it only fits mowers with that specific spindle design. If your mower has a star or round hole, it won't work. Double-check your mower's center hole before ordering. Also, since this is a newer product with no reviews yet, we can't speak to long-term durability from other users, but the materials and specs look promising for a season of regular mowing.

Overall, the Fismiuta 21-inch blade is a solid, affordable replacement for DIYers and homeowners who need a reliable mulching blade for their Troy-Bilt, Craftsman, or MTD mower. If you're comfortable checking your spindle pattern and swapping a blade yourself, this is a good option that should improve cut quality and grass collection over a worn-out stock blade. It's not a pro-grade commercial blade, but for weekly lawn maintenance, it gets the job done.

Blade Length: 21 inches (533 mm)

Blade Width: 2-1/4 inches (57 mm)

Blade Thickness: 9/64 inch (3.4 mm)

Air Lift Height: 1-1/8 inches (32 mm)

Center Hole Shape: Bow tie

Material: High-carbon steel with rust-resistant coating

Design: 3-in-1 (mulching, bagging, side discharge)

Package Quantity: 1 blade

This blade fits many 21-inch walk-behind mowers with a bow tie center hole spindle. Compatible Troy-Bilt models include TB105, TB110, TB115, TB120, TB125, TB130, TB130XP, TB140, TB160, TB160XP, TB200, TB210, TB220, TB230, TB240, TB270ES, TB270XP, TB280ES, TB290ES, TB320, TB330, TB360, TB360ES, and TB370. Compatible Craftsman models include M100, M105, M110, M115, M140, M210, M230, M250, M260, M270, M310, and M320. Also fits many MTD and Cub Cadet models with the same spindle pattern. Always verify your mower's center hole shape before purchasing.

If you own a 42-inch lawn tractor from Craftsman, Husqvarna, or Poulan, keeping a sharp set of mulching blades on hand is key to a healthy lawn. The UDC Parts 532134149 replacement blades come in a two-pack and are designed to directly replace OEM part numbers like 134149, 138971, and many others. These are pre-sharpened and coated with a safety paint that wears off during the first mow, so you get immediate cutting performance.

These blades are best suited for homeowners and DIYers who regularly mow medium to large yards with a riding mower. If you're tired of paying premium prices for OEM blades and want a reliable, budget-friendly alternative, this set is worth considering. Contractors with commercial mowing fleets might prefer higher-end options, but for typical residential use, these blades deliver solid results.

The blades measure 21 inches diagonally with a 2-1/4 inch width and a 5-point star center hole, matching the original specs. The mulching design includes an air lift that helps circulate clippings for finer cutting, which promotes faster decomposition. In practice, they produce a clean cut on standard turf grass and handle light debris well. The pre-sharpened edge stays sharp for several mows, and you can resharpen them when needed to extend their lifespan.

The steel construction feels sturdy, and the coating helps prevent rust during storage. Installation is straightforward if you have basic tools and a jack to lift the mower. The two-pack is convenient for replacing both blades at once or keeping a spare. One thing to note: the safety paint may leave a greenish residue on your lawn initially, but it disappears after a few minutes of mowing.

The main limitation is compatibility. While the list of supported models is extensive, not every 42-inch deck uses the same blade. Always verify your mower's model number before ordering. Also, if you mow in rocky or sandy conditions, the blade edge may dull faster than premium alternatives. Overall, for the price, these UDC Parts blades offer excellent value for routine lawn care. They're a smart choice for anyone with a compatible tractor looking to maintain a sharp, efficient mulching setup without breaking the bank.