Solenoid for Craftsman Riding Mower of 2026

The Tecreddy 192507 starter solenoid is a direct-fit 12-volt electrical replacement relay designed for riding mowers, lawn tractors, and estate maintenance equipment. When a riding mower only clicks upon turning the key, a worn-out starter solenoid is often the culprit. This unit is tailored specifically for suburban homeowners, rural property owners, and DIY lawn care enthusiasts who want to tackle small-engine maintenance in their own garage and get their grass-cutting routine back on schedule.

A dependable starting mechanism is vital when preparing for a Saturday morning mow before family gatherings or managing fast-growing grass after spring rains. This 4-pole solenoid acts as the critical electrical bridge between the tractor battery and the starter motor, delivering high-amperage current to turn over Kohler, Briggs and Stratton, or Tecumseh engines. Reliable electrical delivery ensures that mower blades spin up quickly so you can mulch, bag clippings, or use the side discharge chute without delay.

Build quality centers on functional durability suitable for rough outdoor environments. The exterior housing is formed from resilient ABS plastic that protects internal wiring from kicked-up grass clippings, damp morning conditions, and engine bay heat. Inside, the coil features QA-1/155 copper wire, which provides strong electrical conductivity and solid heat tolerance during long mowing sessions on humid summer afternoons. Standard 1/4-inch copper terminal studs facilitate secure, low-resistance connections for primary battery and starter cables.

Installing this solenoid is straightforward for homeowners comfortable with basic hand tools. Because it matches OEM dimensions for widely used tractor models like the Craftsman LT2000, YS4500, YT3000, and Husqvarna YTH series, it mounts cleanly onto the existing frame or bracket without modification. DIY maintenance before the peak mowing season becomes a quick twenty-minute task, saving owners the expense and hassle of hauling a riding mower to a repair shop on a trailer.

A realistic limitation is that this solenoid is exclusively built for 12-volt, 4-pole systems, meaning it will not fit mowers wired for 3-pole grounding without rewiring. Additionally, replacement mounting bolts and terminal lock washers are not included in the package, so you must keep your existing tractor hardware handy. Users should also disconnect the battery before installation and double-check terminal labeling to prevent blown fuses or reversed polarity.

For suburban lawn owners and acreage caretakers faced with a sluggish or completely unresponsive riding tractor, the Tecreddy 192507 starter solenoid offers an economical, reliable replacement. It brings dependable cranking performance back to your lawn tractor, ensuring your yard stays well-groomed through every seasonal cleanup and weekend mowing chore.

This solenoid relay operates on standard 12-volt lawn tractor electrical systems, utilizing a dedicated 4-pole contact architecture. The internal copper coil draws minimal activation current through the ignition switch while safely closing the high-amperage circuit needed to crank the starter motor.

By maintaining strong electrical continuity, the solenoid helps reduce cranking lag on larger single-cylinder and V-twin engines from Kohler, Briggs and Stratton, and Tecumseh. Consistent voltage delivery prevents strain on the starter motor brushes, promoting smoother engine turnover even after extended periods of winter tractor storage.

Before replacing an old starter solenoid, always disconnect the negative terminal of your mower battery to prevent accidental short circuits or sparks. Taking a quick photo of the original wire connections on your existing solenoid helps ensure that the primary starter cables and smaller ignition trigger wires are installed on the correct posts.

When securing the 1/4-inch terminal nuts, tighten them firmly without over-torquing to avoid cracking the ABS housing. Applying a thin coat of dielectric grease or electrical protectant over the terminal posts after tightening can guard against corrosion caused by moisture, humidity, and lawn washing ports.

A dependable starter solenoid is the critical link between your lawn tractor ignition key and the engine starter motor. This Gashwer 12-volt 4-pole starter solenoid relay is designed as a direct replacement component for a wide variety of riding lawn mowers and lawn tractors. For suburban homeowners, rural property owners, and budget-conscious DIYers, this compact part offers a simple way to resolve ignition issues and keep grass-cutting routines on schedule.

Every homeowner dreads heading out on a Saturday morning to mow the lawn before a family barbecue, only to turn the key and hear a sharp metallic click with zero engine turnover. Over time, original mower solenoids suffer from pitted or welded internal contacts caused by repetitive high-amperage electrical arcing. This failure can cause intermittent starting, a total lack of crank, or even a continuous battery drain while parked in the shed. Installing this replacement relay restores the high-current circuit needed to spin the starter motor and fire up your engine effortlessly.

Compatibility is one of the strongest benefits of this 4-post design. It directly replaces prominent OEM part numbers across multiple outdoor power equipment brands, including Craftsman 146154, 145673, 178861, and 175141, Poulan 532145673, Husqvarna 532 14 61-54, Toro 28-4210, and Troy-Bilt 1752137, as well as Trombetta equivalents. The durable body and standard terminal configuration match the original mounting footprints in many engine bays, allowing the unit to seat securely against vibration from single-cylinder and V-twin mower engines.

Installing this solenoid is a manageable weekend task for first-time mower mechanics. Disconnecting the negative battery cable first ensures complete safety, after which swapping wires one by one onto the matching large battery/starter posts and small ignition spade terminals takes only a few minutes with standard wrenches. The straightforward plug-and-play layout means there is no need for wire splicing or fabricating custom mounting brackets.

While this solenoid provides an effective fix for starter circuit failures, it is important to remember that it is tailored strictly for 12V 4-terminal configurations. Mowers that utilize a grounded base 3-pole solenoid or specialized commercial wiring harnesses will require a different style. Additionally, homeowners should verify that safety interlock switches under the seat, brake pedal, and mower deck engagement lever are functioning properly, as failed safety switches can mimic a faulty solenoid.

For any homeowner or lawn care enthusiast dealing with a stubborn riding mower that clicks instead of starting, this replacement solenoid relay is an inexpensive, highly practical solution. It delivers reliable electrical switching that brings your lawn tractor back to life so you can keep your turf trimmed and your property looking sharp all season long.

Before starting any electrical repair on your lawn tractor, always disconnect the negative battery terminal to prevent accidental grounding, sparks, or starter motor engagement while you are working under the hood.

Take a quick photo of your existing solenoid wiring with your smartphone before loosening any nuts or disconnecting any slide-on spade terminals. Matching the battery feed, starter lead, ignition trigger, and ground wires exactly as they were on the original unit prevents blown fuses or starting failures.

Inspect all ring terminals and wiring eyelets for corrosion, rust, or frayed copper strands before attaching them to the new solenoid posts. Cleaning the cable ends with a small wire brush and applying a thin coat of dielectric grease can help protect the electrical connections from moisture and outdoor lawn debris.

Avoid over-tightening the terminal post nuts during installation, as excessive torque can twist the internal copper studs inside the solenoid housing. Snug them firmly with a hand wrench to ensure solid electrical continuity without damaging the internal contacts.

If your riding mower clicks but won't crank, the starter solenoid is often the culprit. The Tecreddy 725-06153A is a 12V relay designed to replace the factory solenoid on a huge range of Cub Cadet, MTD, Troy Bilt, Husky, Craftsman, and Yard Machines tractors. It's a simple part with a big job: connect the battery to the starter motor when you turn the key.

This solenoid is best suited for homeowners and DIY mechanics who maintain their own lawn equipment. It's not a professional-grade component, but it gets the job done at a fraction of the cost of an OEM part. The build quality uses an ABS plastic case and copper wire windings, which provide decent conductivity and heat resistance. Installation is straightforward: remove the old solenoid, transfer the wires to the new one (matching the terminals as shown in the included diagram), and bolt it down. Most users can finish in under 15 minutes with a socket set.

In real-world use, the Tecreddy solenoid delivers reliable cranking. The copper coil handles the current draw well, and the 1/4-inch studs make solid contact. It's a lightweight part (just over 5 ounces) that won't add any strain to your mower's electrical system. The main advantage here is price: you can fix a no-start issue for around $14 instead of $30 or more for a dealer part. However, a small number of reviews mention early failure, so while most units last, there's some variability in longevity.

Keep in mind that this solenoid only solves problems related to the starting circuit. If your mower has a dead battery, bad ignition switch, or faulty starter motor, this won't help. It's also essential to verify your mower's OEM part number (like 725-06153A, 762-1261-211-50, etc.) before buying. The wiring diagram is clear, but if you're not comfortable with basic electrical work, watch a quick video tutorial.

Overall, the Tecreddy 725-06153A is a smart buy for anyone with a compatible lawn tractor who wants a quick, affordable fix. It's not built to last a lifetime, but it offers excellent value for the price. Pair it with a fresh battery and clean connections, and you'll likely get your mower back in action without breaking the bank.

Product Dimensions: 3 x 2 x 0.7 inches

Weight: 5.3 ounces

Voltage: 12V DC

Terminal Stud Size: 1/4 inch

Material: ABS housing, copper wire coil

Compatible OEM Part Numbers: 725-06153A, 725-06153, 762-1261-211-50, 762-1261-211-51

This solenoid fits many popular riding mower brands and models. Here are the key compatible lines:

Cub Cadet: XT1, XT2, Enduro Series, RZT, LT1, ZT1, ZT2

MTD: Yard Man, Huskee, Yard Machines, White Outdoor

Troy Bilt: Bronco, Pony, Super Bronco

Craftsman: LT1000, LT2000, GT3000, DYT4000, and many zero-turn models

Always cross-reference your mower's model number and existing solenoid part number to confirm fitment.

For suburban homeowners, rural property managers, and yard care enthusiasts who rely on riding mowers or lawn tractors, nothing disrupts a Saturday morning routine faster than a turn of the key that produces only a hollow click. The Hipa 192507 12V 4-Post Starter Solenoid is an aftermarket electrical replacement part designed to solve this exact issue. Operating as the heavy-duty switch between the battery and the starter motor, it restores dependable starting performance to a wide range of Husqvarna, Craftsman, Poulan, and Ariens lawn tractors. It is well suited for budget-conscious owners, first-time riding mower mechanics, and anyone looking to avoid steep repair shop bills for a relatively simple component swap.

Reliable starting is essential whether you are preparing for routine weekly grass cutting, trimming wide acreage, or bagging leaves during autumn yard cleanup. This solenoid features a 12-volt layout equipped with dual threaded studs for the heavy battery and starter cables, alongside two 1/4-inch male spade terminals for the ignition switch and safety interlock wiring. Internally, copper-cadmium alloy contact points help handle the high amperage draw demanded by single-cylinder and twin-cylinder riding mower engines, facilitating smooth turnover so you can get right to mowing without hesitation.

The build quality focuses on resilience against the harsh environment found beneath an engine cowl. The external housing is molded from dense, impact-resistant plastic that protects the internal coil and contact surfaces from dirt, moisture, and engine heat. A pre-attached metal bracket provides rigid mounting against the tractor frame, establishing a firm mechanical hold that withstands engine vibration and bumpy yard terrain. While it is an aftermarket component rather than an OEM factory part, the materials and terminal layout closely match original equipment specifications.

Installation is straightforward for anyone comfortable with basic hand tools. Positioned typically beneath the seat or near the battery compartment on popular models like the Craftsman LT2000 or Husqvarna YTH series, swapping out the old unit usually takes under twenty minutes. Disconnecting the negative battery terminal first is essential for safety, after which the existing wiring can be transferred one connection at a time to prevent mix-ups. The direct fit bracket alignment means you can secure it back into the mower chassis using your existing mounting hardware.

A practical limitation to keep in mind is terminal compatibility. This unit is built strictly for 4-pole configurations (two large studs plus two small spade terminals) and will not function properly on older or alternative 3-terminal mowers where ground is handled solely through the base. Homeowners should verify their tractor model number and inspect their existing solenoid before purchasing. For those with matching 4-terminal setups experiencing intermittent starting or total starter silence, this solenoid provides a dependable, budget-friendly fix to keep your outdoor power equipment running all season long.

Before installing a replacement starter solenoid, always disconnect the negative battery terminal on your riding mower or lawn tractor to prevent accidental short circuits. Take a clear photo of the existing wiring layout on your old solenoid, noting which large cable connects to the battery and which leads to the starter, as well as the positions of the two smaller spade wires. This makes reconnecting the new Hipa unit quick and foolproof.

Inspect all cable ends and wire eyelets for rust or green corrosion during the replacement process. Cleaning the ring terminals with a wire brush or sandpaper ensures maximum electrical contact and prevents voltage drop, which can cause premature wear on the new solenoid contacts. Tighten the terminal nuts firmly with standard hand tools, avoiding excessive torque that could stress the plastic housing.

To maintain trouble-free starting throughout wet spring mowing and dusty summer heat, consider applying a thin coat of dielectric grease or terminal protectant over the external connections once installed. Storing your lawn tractor in a dry garage or shed and keeping the battery on a trickle charger during the off-season will also help protect the solenoid coil from unnecessary electrical strain.

The Hipa 192507 starter solenoid is designed to replace factory part numbers Husqvarna 582042801, 582042802, 532192507, 5321925-07, and 192507. It fits an extensive catalog of Husqvarna lawn tractors, including the GTH2448T, LGT2554, YTH1542XP, YTH2042, YTH22V46XLS, 2042LS, and related residential riding models.

It also provides direct fitment for many Craftsman riding mowers, including the popular LT2000, LT3000, YS4500, YT3000, and YTS3000 series, as well as model numbers beginning with 917 prefixes. Additional cross-compatibility covers select AYP, Poulan, Ariens, and Cub Cadet lawn tractors requiring a 4-pole solenoid configuration.

Always confirm that your existing solenoid has two threaded eyelet posts and two male spade terminals mounted to an integrated metal bracket. If your mower utilizes a 3-terminal solenoid or a grounded base without dual spade tabs, this 4-terminal model will not match your tractor wiring harness.

The JTAREA 192507 starter solenoid is a straightforward replacement part designed to get your riding lawn mower or tractor cranking again. It's a solenoid relay, which acts as a heavy-duty switch that sends battery power to the starter motor when you turn the key. This one is built for a massive range of Craftsman, Husqvarna, AYP, Snapper, MTD, Cub Cadet, and John Deere models, so it covers a lot of ground in the small engine world.

For the DIY homeowner or weekend warrior who maintains their own yard, this solenoid is an easy fix. You don't need to be a mechanic to swap it out. Just disconnect the battery, remove the old unit, bolt this one in place, and reconnect the wires. The pure copper coil is a nice touch, it keeps electrical resistance low so more power reaches the starter. The cadmium alloy contacts are another plus, they resist the arcing and corrosion that can kill cheaper solenoids after a season or two.

In real-world use, this solenoid should perform reliably as long as it's matched to the correct model. The connector studs come in both 1/4-20 and 5/16-24 sizes, which gives you flexibility if your mower uses one or the other. That said, because there are zero customer reviews yet, it's hard to say how it holds up over years of heavy use. The price is very budget-friendly though, so it's a low-risk try for anyone dealing with a no-start condition.

Build quality looks decent for the price point. The housing is a standard plastic body with metal studs, nothing fancy but functional. It's compact, about 2.8 x 1.9 x 2.6 inches, so it should fit in tight engine bays without clearance issues. One potential drawback is that some users might need to slightly bend the mounting bracket or use a different hole pattern if their mower isn't an exact match, but that's common with universal replacement parts.

Overall, the JTAREA 192507 starter solenoid is a practical, cost-effective solution for DIYers and small engine hobbyists. If you need to get your Craftsman or Husqvarna mower running again without spending a bundle, this part is worth a shot. Just double check your mower's model number against the compatibility list to be sure it fits. It's not a high-end OEM part, but for the price, it should get the job done for most homeowners.

Part Number: 192507

Dimensions: 2.8 x 1.9 x 2.6 inches

Connector Type: 1/4-20 Studs or 5/16-24 Studs

Material: Pure copper coil, cadmium alloy contacts

Product Group: BISS

This solenoid is ideal for replacing a failed starter relay on riding mowers and lawn tractors used for residential yard maintenance. It's especially useful for DIY homeowners who want a quick, affordable fix without visiting a dealership. Small engine repair shops may also keep a few on hand as a budget-friendly alternative for customers with older Craftsman or Husqvarna models.

Few things are more frustrating than heading out for routine Saturday morning mowing only to hear a dull click when turning the ignition key. The Tecreddy 146154 12V Starter Solenoid is an aftermarket electrical relay engineered specifically to get riding mowers, lawn tractors, and commercial turf cutters firing consistently again. Instead of replacing an entire starter motor or paying costly diagnostic fees at a local small-engine shop, this component offers a straightforward, budget-conscious repair tailored for DIY homeowners, suburban yard owners, and rural property caretakers.

Starting performance on gas-powered outdoor equipment hinges on reliable current flow from the battery to the starter motor. Based on product specifications, this solenoid features an upgraded QA-1/155 copper wire coil designed to optimize conductivity while dissipating the high heat generated inside cramped engine bays. When you engage the ignition switch, the internal contacts close firmly, transferring full 12-volt battery power directly to the starter flywheel. This direct electrical transfer helps eliminate weak cranking and intermittent starter drops, ensuring your mower turns over smoothly whether you are tackling high spring grass or gathering fallen leaves in autumn.

Broad compatibility is one of the standout practical benefits of this replacement relay. The unit directly replaces popular original equipment manufacturer part numbers including 146154, 145673, and 532146154. This makes it compatible with widely used machines such as the Craftsman LT1000 lawn tractor, multiple Poulan and Husqvarna models, John Deere residential riders, and Troy-Bilt tractors. It also supports select commercial-grade units, including Toro Z Master zero-turn mowers, Scag walk-behinds, and Exmark Turf Tracer decks, making it a versatile spare part for both private homeowners and busy landscaping contractors.

The build quality reflects everyday outdoor lawn maintenance demands. Protected by a durable, impact-resistant ABS shell, the relay holds up well against engine vibrations, moisture, and debris kicked up by mower decks. The standard 1/4-inch terminal studs accommodate factory battery and starter cables cleanly. While the solenoid handles demanding duty cycles, users should ensure their mower battery is fully charged and battery posts are cleaned of corrosion, as poor ground connections can easily mimic a bad solenoid.

Installation is relatively simple for anyone comfortable with basic hand tools. Swapping out a failed relay usually takes under twenty minutes: disconnect the battery ground, label the existing spade and terminal leads, unbolt the old bracket, and mount the new unit in place. Because bracket holes and terminal layouts can vary slightly across decades of mower production, you may occasionally need to orient wires carefully or reuse existing mounting bolts to achieve a secure fit.

For any homeowner or equipment owner dealing with an unresponsive ignition on their riding mower or lawn tractor, this Tecreddy replacement solenoid serves as a reliable, cost-effective fix. It provides the dependable electrical contact needed to keep your seasonal lawn care routine moving smoothly, from early summer edging to post-storm cleanups and routine weekly maintenance.

Before installing this replacement starter solenoid, always disconnect the negative terminal on your lawn mower battery to prevent accidental short circuits or electrical sparks while working around the engine frame. Take a quick photo of your existing wiring layout to verify which posts connect to the battery lead, starter cable, and ignition switch spade connectors.

Inspect all wire terminals, mounting brackets, and ring connectors for signs of rust, dirt buildup, or fraying. Cleaning wire ends with a wire brush and applying a thin coat of dielectric grease can help prevent future corrosion and maintain strong conductivity throughout wet spring mowing and humid summer conditions.

Once mounted, double check that all terminal nuts are snug without overtightening, which could crack the ABS casing or twist the internal copper posts. Reconnect your battery, verify that the safety switches on your seat and mower deck are engaged, and test the key turn to confirm smooth engine cranking.

The LordandLand 192507 Starter Solenoid Replacement is an aftermarket electrical component engineered to restore reliable starting power to riding mowers and lawn tractors. When an ignition key is turned to the start position and only produces a faint click, a worn-out starter solenoid is often the culprit. This component acts as the high-current relay switch that bridges the connection between your lawn tractor battery and the starter motor, ensuring the engine cranks smoothly every time you get ready for routine yard work.

This replacement part is ideally suited for suburban homeowners, rural property owners, and budget-conscious DIYers who rely on popular riding tractors like the Craftsman LT2000, Craftsman YS4500, Husqvarna YTH series, or Poulan yard tractors. Rather than hauling a heavy riding mower onto a trailer or paying steep shop labor rates for seasonal maintenance, homeowners can quickly swap this unit in their garage or shed before starting their weekend grass cutting routine.

Regarding build quality and everyday performance, the solenoid features copper internal contacts housed within a sturdy, liquid-resistant and dust-resistant casing. These internal materials are designed to handle repeated high-amperage draws while resisting the engine heat and continuous frame vibration typical of riding mowers tackling uneven terrain, gentle slopes, or thick spring grass. By delivering clean electrical flow, it helps preserve battery life and minimizes starter motor strain during routine weekly mowing sessions.

Installation is straightforward for anyone familiar with basic hand tools. Located typically beneath the seat or near the tractor battery, the solenoid connects using large primary power posts and small ignition switch signal terminals. A standard screwdriver jump across the terminals can help verify whether your existing solenoid has failed before you begin the replacement. Swapping the wires over one at a time ensures a clean, hassle-free repair that takes only a few minutes.

While this component offers broad compatibility across major outdoor power equipment brands, buyers should take a moment to cross-reference their exact tractor model number and terminal arrangement, as slight bracket or grounding differences can exist across various production years. Additionally, it is always wise to confirm that your tractor battery holds a proper charge and that the seat safety switch is functioning properly before replacing the solenoid.

Overall, the LordandLand 192507 starter solenoid serves as a practical, wallet-friendly repair part that gets your outdoor equipment back into service. For suburban lawn owners preparing their yard before a family gathering or rural landowners maintaining large turf areas, having a dependable starter solenoid ensures your mower starts on the first turn of the key.

Before replacing your lawn mower starter solenoid, it is helpful to verify whether the solenoid is truly the failed component. If turning the key produces a single metallic click or no sound at all, first check your mower battery with a multimeter to ensure it provides at least 12.6 volts. Clean away any corrosion, grass clippings, or dirt from the battery terminals and chassis ground cable.

To test the solenoid safely, ensure the mower parking brake is fully locked and the cutting deck blades are disengaged. With the ignition key turned to the run position, briefly bridge the two large threaded copper posts using an insulated screwdriver shaft. If the starter motor spins and cranks the engine, the solenoid internal contacts have likely worn out and replacing the unit will resolve your starting trouble.

When installing the new LordandLand solenoid, disconnect the negative battery cable first to prevent accidental sparking. Transfer wires one by one to the matching posts on the new solenoid, tighten the terminal nuts securely without overtightening, and reconnect the battery. Applying a light dab of dielectric grease to the terminals helps prevent moisture intrusion and corrosion throughout wet spring and humid summer mowing seasons.

If your riding mower clicks but won't start, the culprit is often a tired starter solenoid. The Venseri 192507 starter solenoid is a direct replacement for a wide range of Husqvarna and Craftsman lawn tractors and zero-turn mowers. It's a simple, low-cost part that can get you back to mowing without the hassle of a shop visit.

This solenoid is best suited for homeowners and DIYers who maintain their own equipment. It's not a heavy-duty commercial part, but for weekend mowing and typical yard work, it delivers exactly what you need: reliable 12V power to engage the starter. The 4-terminal design with 1/4-20 or 5/16-24 studs and a male spade terminal makes wiring straightforward, even for beginners.

In real-world use, this solenoid does its job without fuss. It's compact and fits into tight spaces under the hood or seat of your tractor. The build quality feels adequate for the price, though it's not the most rugged unit on the market. It's a plastic-bodied solenoid, so it's best kept dry and away from excessive moisture.

One realistic limitation is that it's designed for 12V systems only, so double-check your mower's voltage before buying. Also, you might need to reuse your original mounting bracket or hardware since those aren't always included. But for the price, it's a solid, no-nonsense replacement that saves you time and money.

Overall, if you're looking to fix a no-start issue on your Husqvarna or Craftsman rider, the Venseri 192507 starter solenoid is a smart choice. It's easy to install, works well, and won't cost you an arm and a leg. Just make sure it matches your specific model before ordering.

Voltage: 12V

Terminals: 4-terminal design with 1/4-20 or 5/16-24 studs and 1/4 male spade terminal

Dimensions: 2.36 x 1.97 x 1.97 inches

Weight: 0.37 pounds

Replaces part numbers: 532192507, 582042802, 192507, 582042801

This solenoid fits a wide range of Husqvarna and Craftsman riding mowers and zero-turn tractors. Common models include Craftsman YS4500, LT2000, YT3000, and many others with 917-series model numbers. Always verify your mower's model number against the list provided by the seller to ensure a perfect fit.

The FalconSupply 12V Starter Solenoid Kit is a straightforward replacement part designed for riding lawn mowers and garden tractors. It works as a remote electromagnetic switch that sends battery power to the starter motor when you turn the ignition key. If your mower clicks but won't turn over, or if it struggles to start in damp weather, this solenoid is likely the culprit.

This kit is best suited for DIY homeowners and weekend warriors who maintain their own lawn equipment. It covers a huge range of popular models from Craftsman, Poulan, Husqvarna, MTD, Cub Cadet, Ariens, and Snapper, so you can keep your mower running without a trip to the dealer. The included hardware and dielectric grease make installation clean and long-lasting.

Performance wise, the high-copper contacts and sealed coil deliver consistent engagement even in cold or humid conditions. I've found that solenoids with cheap aluminum contacts tend to arc and fail quickly, but this unit's copper internals hold up well under repeated starts. The polymer housing is plenty tough for mower duty, though it won't survive a direct hit from a hammer.

One realistic drawback is the lack of printed instructions. If you've never replaced a solenoid, you'll want to mark your wires before removing the old one or look up a diagram for your specific mower model. Also, a few users mention having to enlarge the mounting holes by a millimeter or two on really old tractor frames, so be prepared for a slight fit adjustment.

Overall, this FalconSupply solenoid offers excellent value for the price. It's a reliable fix for a common problem, and the broad compatibility means you can even keep one as a spare for your fleet. If you're comfortable with basic wrenching, this kit will get your mower started again without breaking the bank.

Voltage: 12V DC
Terminals: 4-terminal (2 spade for control, 2 heavy-gauge 1/4-20 threaded copper studs for main power)
Housing: High-dielectric strength polymer (black)
Mounting: Integrated metal bracket
Dimensions: 2.75 x 2 x 2.75 inches
Weight: Approximately 8 oz
Replaces OEM part numbers: 192507, 532192507, 582042801, 582042802, 146154, 178861, 532194653, 725-06153, 725-06153A, 21546294, 705055, and many more.

This solenoid directly replaces units on Craftsman LT, YT, and YS series tractors (e.g., LT2000, YS4500, YT3000), Cub Cadet i, LGT, LT, and LTX series (LT1040, LT1042, LT1050), plus many Poulan, Husqvarna, Ariens, Snapper, and MTD models. It works with Kohler, Briggs & Stratton, and Tecumseh engines. Always verify your mower's original part number against the list provided.