Lawn Mower Blades Price of 2026: Clean-Cut Picks

The Greenworks 2905203 is exactly what you want when it is time to replace the blade on your compatible 21-inch Greenworks mower. This is an OEM part, meaning it comes from the same factory that supplies blades with your original mower. If you have a Greenworks 80V, 60V, 40V, or 2x24V model that uses a 21-inch cutting deck, this blade is the most straightforward replacement option available.

This blade shines most for the suburban homeowner who mows an average lawn once a week. The cutting edge arrives sharp enough to slice cleanly through grass and even light weeds right out of the box. I have used these on a Greenworks 80V mower for two seasons, and the blade still cuts well with occasional sharpening. The steel feels sturdy it does not bend or chip easily if you accidentally hit a small rock or a root. Installation is simple: flip the mower on its side, remove the center bolt, swap blades, and tighten. No special tools required.

Build quality is typical of a well-made OEM blade. The center hole and mounting pattern match the mower spindle precisely, so you will not fight with alignment. The black coating resists rust better than plain steel, which is nice if you store your mower in a damp garage. One practical benefit of choosing OEM is the balance. Aftermarket blades sometimes come slightly off-balance, causing vibration that can loosen bolts or wear out bearings. This Greenworks blade spins true, keeping things smooth and quiet.

There is one realistic limitation: this blade only works if your mower uses the specific mounting pattern shown in the product images. Greenworks makes different blade patterns for different mower series, so you cannot assume all 21-inch blades fit. Check your mower model number against the long compatibility list in the description. Also, this is a standard lift blade, not a mulching or high-lift blade. If you bag clippings or need aggressive mulching, you might want a dedicated blade for that task. But for everyday cutting and side discharge, this blade does the job very well.

For the homeowner with a compatible Greenworks mower who just wants a reliable, drop-in replacement that restores factory cutting performance, the Greenworks 2905203 is an easy recommendation. It fits, it cuts, and it lasts. Keep one on hand so you are never stuck with a dull blade mid-season. If you own multiple compatible Greenworks mowers, buying a spare makes sense since the same blade fits across many models. Solid value, no fuss.

Color: Black
Size: 21 inch (2905203)
Dimensions: 20 x 1.5 x 2 inches
Weight: 1 pound
Product Group: Lawn and Patio
Binding: Lawn and Patio

80V Mowers: 2550702, 2550402, 2501202, 2500402, 1356602, 1356702, 1356402, 1356502, 2533902, 2541302, 2533402, 2533602, 2502202, 2506902, 2515902, 2534102, 2502402NV, 2533302, 2541202

60V Mowers: 2531702, 2531602, 2545102, 2531702T, 2531602T, 2535102T, 2504902T, 2509802

40V Mowers: 2515502, 1306402AZ, 2527302AZ, 2525202, 2516402, 1348402-HB, 2525102AZ, 2506502AZ, 2508502, 2506602, 2513502

2x24V Mowers: 2533202, 2532702, 2532502, 2532902

Always check your mowers mounting pattern against the product images before purchasing.

The EGO POWER+ AB2100 replacement blade is a genuine OEM part built specifically for EGO's line of 21-inch cordless mowers, including the LM2100, LM2101, LM2102SP, LM2100SP, and LM2142SP models. This is not an aftermarket clone but a factory-engineered blade designed to restore or even improve your mower's cutting performance. Whether you are a homeowner maintaining a suburban lot or a property manager handling multiple lawns, this blade delivers consistent, reliable results.

In real world use, the standout feature is suction. Many users report that this blade dramatically improves lift, pulling up matted grass and leaves that older blades simply blow over. It handles bagging, mulching, and side discharge equally well thanks to its true 3-in-1 design. The factory-sharpened steel cuts cleanly, reducing frayed grass tips that can turn brown after mowing. It also powers through fall leaf cleanup with ease, allowing you to skip raking entirely in many cases.

Build quality is solid. The blade is robust enough to handle rocky terrain and occasional hidden debris without bending or chipping prematurely. Installation is straightforward, a simple bolt-on process that takes minutes. Just be sure to install it with the cutting edge facing the right direction. A common mistake is mounting it backward, which kills suction and performance.

There are a few trade-offs to consider. Because this blade generates more lift, it does create more noise than the standard blade. It also consumes more battery power, especially when cutting thick, tall grass. Some users note the factory edge is not perfectly sharp out of the box and recommend a quick pass with a file or sharpening stone before first use. However, these minor drawbacks are easily outweighed by the performance gains.

Overall, the EGO AB2100 is an excellent upgrade for any compatible EGO mower. If you have been disappointed by poor bag fill or stragglers left behind, this blade is the fix. It is a worthwhile investment for homeowners who want a crisp, clean cut and efficient leaf management without moving up to a gas mower.

Brand: EGO Power+

Model Number: AB2100

Blade Type: 3-In-1 Mulching, Bagging, Side Discharge

Cutting Width: 21 Inches

Material: Factory Sharpened Steel

Item Weight: 1.1 Pounds

Compatible Mower Models: LM2101, LM2100, LM2102SP, LM2100SP, LM2142SP

Assembly Required: No

UPC: 692042006142

This blade is ideal for homeowners with medium to large lawns who want the convenience of a single blade for all mowing tasks. It excels at bagging clippings in thick grass and mulching leaves in the fall. It also works well for those who maintain rental properties or small commercial lawns with EGO mowers, providing reliable performance across varied terrain.

If you own a Greenworks 16-inch corded or cordless mower, the replacement blade under model 29512 is a straightforward upgrade that keeps your mower cutting like new. This blade is made from a single piece of alloy steel, which means there are no weak weld points that could fail over time. The forging process produces a rigid, durable edge that holds up well against grass, weeds, and even light debris. For homeowners who rely on their electric mower for weekly maintenance, this blade offers a clean, even cut without leaving ragged edges that can brown out.

The installation process is simple. You remove the old blade, line up the center hole, and bolt this one in place. The 15.75-inch length matches the factory specification, so your mower's cutting deck will operate at peak efficiency. Because it's designed specifically for Greenworks 16-inch models 25322 and 25242 (and many other 16-inch electric mowers), you won't have to worry about balance issues or poor fit. Just make sure you secure it with the proper torque and your mower will be ready to go.

In real-world use, this blade delivers consistent performance across different grass types and moisture levels. It does a good job mulching clippings and doesn't clog easily, thanks to its sturdy shape and sharpened edges. The one-piece steel construction also helps reduce vibration compared to blades with welded tips, which means less fatigue on your hands and arms during longer sessions. It's not the most aggressive blade on the market, but for a typical suburban lawn it's more than adequate.

Build quality is solid. The alloy steel resists bending if you hit a hidden rock or root, and the finish resists rust better than some cheaper alternatives. That said, like any mower blade, it will eventually need sharpening. If you mow frequently over tough grass or gravel, plan to touch it up with a file or grinder every few months. The lightweight design (just under 0.7 pounds) makes the blade easy to handle during maintenance, and it stores compactly in your workshop or garage.

One limitation is that it's not a universal blade. It only fits 16-inch mowers with the specific center hole pattern. Also, the package does not include new bolts or washers, so you'll need to reuse the original hardware or buy replacements if they're worn. For the price, this blade offers excellent value for DIY homeowners who want to extend the life of their Greenworks mower without spending on a new machine. It's a practical, reliable choice that gets the job done neatly.

Brand: Greenworks
Model: 29512
Fits: 16-inch electric mowers, including Greenworks 25322 and 25242
Blade Length: 15.75 inches (actual cutting width 16 inches)
Material: Alloy Steel, one-piece forged construction
Weight: 0.69 pounds
Dimensions: 15.75 x 1.97 x 0.71 inches
Compatible Power Sources: Corded Electric, Cordless Electric
Assembly Required: Yes (bolt to mower spindle)

This replacement blade is ideal for homeowners who maintain a small to medium-sized lawn with a Greenworks 16-inch electric mower. It's perfect for routine weekly mowing of Bermuda, fescue, or rye grass. Because it's designed for electric mowers, it pairs well with both corded and battery-powered units, making it a reliable backup or upgrade blade. If you want to keep your mower cutting cleanly without upgrading to a new machine, this blade is a smart, budget-friendly choice.

Grasscool's 42-inch mulching blade set is a direct replacement for Craftsman, Husqvarna, and Poulan riding mowers with a 5-point star mounting pattern. Designed for homeowners and DIYers who maintain large lawns, these blades aim to deliver better mulching and bagging compared to standard OEM options. The set includes three blades that fit decks with a 42-inch cutting width, making them a practical upgrade for tractors like the LT1000, LT2000, and similar models.

In real-world use, the Grasscool blades cut cleanly and mulch grass into fine clippings that decompose quickly. The high-lift wings create strong airflow, which improves bagging performance and reduces the chance of clogging in wet or thick grass. Several reviewers note that the blades are thicker and heavier than original equipment, which translates to better durability on bumpy terrain. They arrive sharp enough for immediate use, though some users still touch up the edge for a razor finish.

Build quality is solid for the price point. The blades are made from hardened steel with a thick black coating that resists rust. They pass factory balance and hardness tests, so you can install them without worrying about vibration. While they are manufactured in China, the overall craftsmanship impresses most owners. The main drawback is compatibility: you must have the 5-point star hole pattern. If your mower uses a 6-point star, these won't work. Additionally, the blades may dull faster on sandy or rocky soil, but regular sharpening extends their life.

Overall, the Grasscool 42-inch mulching blade set is a smart buy for anyone looking to save money without sacrificing cut quality. They are especially suited for homeowners who mow regularly and want a durable, balanced blade that handles mulching and bagging equally well. If you can confirm your mower's mounting pattern, these blades offer reliable performance and excellent value.

Blade Length: 21 inches (533mm)

Blade Width: 2 1/4 inches (56.5mm)

Blade Thickness: 9/64 inch (3.5mm)

Center Hole Shape: 5 Point Star

Deck Size: 42 inches

Lift: 1 1/16 inches (27.5mm)

Blade Type: Mulching

Material: Iron (hardened steel)

Weight: 3 pounds per set

Replaces OEM Numbers: 134149, 532134149, 422719, 424752, 138971

These blades fit Craftsman, Husqvarna, Poulan, and Poulan Pro riding mowers and zero-turn mowers with 42-inch cutting decks that use a 5-point star mounting pattern. Compatible models include Craftsman LT1000, LT2000, Husqvarna YTH series (2009 and newer), RZ series zero-turns, Poulan PB19H42YT, PB20H42YT, and many others. Always verify your original blade's mounting pattern before ordering. If your blade has a 6-point star hole, use OEM numbers 942-0616A or 942-04308 instead.

The UDC Parts 942-04308 lawn mower blades are a direct replacement set designed for 42-inch decks that use a 6-point star center hole. Despite being a simple blade swap, these high lift mulching blades completely transform the mowing experience. They fit a wide range of popular riding mowers from Cub Cadet, Craftsman, Troy Bilt, MTD, and others, making them a versatile upgrade for homeowners and DIYers alike.

In real-world use, the standout feature is the mulching capability. The high lift design creates a strong vacuum that stands grass up for a clean cut and then shreds clippings into fine particles that disappear into the lawn. Users report a dramatic reduction in visible clippings, often eliminating the need for bagging. The blades also run noticeably quieter than typical blades, producing a low hum rather than a roar. This is a huge plus for anyone mowing near neighbors or early in the morning.

Build quality is impressive for the price. The blades are made from thicker, heat-treated steel that feels sturdier than many OEM replacements. They come pre-sharpened under a protective coating that wears off during the first mow. After that, you can resharpen them several times to extend their life. Installation is straightforward just remove the old blades, align the 6-point star, and bolt the new ones on. No adapters or modifications needed.

One realistic drawback is the high lift design itself. Because it creates such strong suction, it can pick up sand or loose dirt if you mow over bare spots. This can dull the blades faster and may kick up debris. Also, these blades only fit decks with a 6-point star center hole, so you must double-check your mower's spindle before buying. But for the vast majority of compatible mowers, these blades deliver a superior cut with less noise and less cleanup.

Overall, the UDC Parts 942-04308 blades offer outstanding value for anyone with a 42-inch riding mower. They outperform many OEM blades at a lower cost, and the two-pack means you have a spare ready to go. Whether you're a weekend warrior or a dedicated lawn enthusiast, these blades will give you a cleaner, quieter, and more efficient mowing experience.

Length: 21-1/4 inches (measured diagonally)

Width: 2-1/2 inches

Thickness: 0.157 inches

Center Hole: 6-point star

Side Hole: 3/8 inch

Center to Center Outside Hole: 3 inches

Air Lift: 1-7/64 inches

Cutting Edge Length: 6-57/64 inches

Compatible Deck Size: 42 inches

Package Includes: 2 blades

Replaces OEM part numbers: 942-04308, 942-04308A, 942-04312, 942-04308-X, 942-04312A, 742-04308, 742-04308A, 742-04312, 742-04312A, 942-0656, 742-0656, 490-110-C108, 490-110-C109, 490-110-M108, CMXGZAM110108, OCC-742-04312, OEM-742-04308.

Fits 42-inch decks on Cub Cadet (LTX1040, XT1, XT2, Ultima ZT1, RZT), Craftsman (T series, LT series, Z series), Troy Bilt (Pony, Bronco, Horse, Mustang), MTD, Yard Machines, Yard-Man, Columbia, Murray, Huskee, MasterCut, White Outdoor, and more. Always verify your mower model number and deck type before ordering.

The KOFINAM 2 Pack Replacement Lawn Mower Mulching Blades are a practical choice for homeowners and DIYers who maintain a 42-inch deck mower. These blades are designed to replace OEM parts on Cub Cadet, MTD, and Troy Bilt models, including popular series like the XT1, XT2, LT42, LTX1040, and RZT-L42. If you have one of these mowers and want to improve your lawn's health with fine mulching, this set is worth a look.

In real-world use, these blades do a solid job of chopping grass clippings into tiny pieces that break down quickly, returning nutrients to the soil. The mulching design works best with regular mowing, keeping clippings from clumping on the lawn. The 21-1/4-inch length and 2-3/8-inch width match OEM specs, and the 6-point star center hole ensures a snug fit on the spindle, reducing wobble and vibration during operation. Installation is straightforward with basic tools, though you might want to balance them for the smoothest cut.

Build quality is decent for the price. The steel feels sturdy enough for typical residential lawns, handling thick grass and light debris without bending or dulling prematurely. The black finish resists rust reasonably well, though it will wear over time. One limitation is that these are strictly mulching blades, so they won't work well with bagging or side discharge setups. If you switch between modes, you'll need to swap blades.

For the average homeowner with a 42-inch deck, this two-pack offers great value. You get a spare blade or a complete set, which extends the time between replacements. The 6-month warranty adds a layer of confidence, though most users won't need it. Just keep in mind that you may need to check balance before the first use, as some sets can be slightly off from the factory.

Overall, the KOFINAM mulching blades are a reliable, cost-effective upgrade for maintaining a healthy lawn. They're best for DIYers who mow weekly and want to skip bagging, not for commercial landscapers who need heavy-duty, all-purpose blades. If your mower is on the compatibility list, this set is a smart buy.

Length: 21-1/4 inches

Width: 2-3/8 inches

Thickness: .138 inches

Center Hole: 6-Point Star

Deck Size: 42 inches

Quantity: 2 blades per pack

Color: Black

Material: Steel

Warranty: 6 months

Fits Cub Cadet models: LTX1040, LTX1042KW, RZT-L42, RZT-L42 KH, RZT-S42, RZT-S42 KH, RZT-SX 42, RZT-SX 42 KH, XT1-LT42, XT1-LT42C, XT1-LT42 KH, XT2-LX42, XT2-LX42 KH, XT2-LX42 KW, ZT1-42 KH

Fits Craftsman models: T105, T130, T210, T1100, T7800, T1000, T1200, T1300, T1400, T1800, T3000, T8000, T2100, LT1500, Z6000, ZS6500

Fits Huskee: LT4200

Fits Columbia: CLT42G, CLT42H, CYT 4220

Replaces OEM numbers: 942-0616, 742-0616, 942-04126, 742-04126, 942-04126-X, 942-0616-X, 942-0616A, Windsor 51-4440, 942-04308-X, MTD 942-04308-X, Troy Bilt 942-04308-X

The Fismiuta 21-inch lawn mower blade is a replacement mulching blade designed for many popular walk-behind push mowers from Troy-Bilt, Craftsman, and MTD. It's built as a 3-in-1 blade, meaning you can use it for mulching, bagging, or side discharge without needing to swap blades for different tasks. This makes it a practical choice for homeowners who want one blade to handle their regular mowing routine.

In real-world use, the standout feature here is the 32mm air lift height. That's a bit taller than the typical 28mm found on many stock blades, and it makes a noticeable difference in how well the blade pulls grass up before cutting it. You get a more consistent cut height, and the stronger suction helps prevent clogs in damp or thicker grass. For bagging, this means you'll spend less time emptying the bag because the clippings flow better. For mulching, the blade shreds clippings finely so they decompose quickly and feed your lawn naturally.

The blade is forged from high-carbon steel, which holds an edge longer than standard steel and handles tough weeds or occasional rocks without chipping. The rust-resistant coating is a nice touch during installation, but it does wear off after a few uses. That's normal, and the blade can be sharpened easily with a file or bench grinder. Build quality feels solid for the price, and the blade measures 21 inches long, 2-1/4 inches wide, and 3.4mm thick, which matches OEM specs for a direct swap.

One thing to watch out for is the center hole shape. This blade uses a bow tie pattern, so it only fits mowers with that specific spindle design. If your mower has a star or round hole, it won't work. Double-check your mower's center hole before ordering. Also, since this is a newer product with no reviews yet, we can't speak to long-term durability from other users, but the materials and specs look promising for a season of regular mowing.

Overall, the Fismiuta 21-inch blade is a solid, affordable replacement for DIYers and homeowners who need a reliable mulching blade for their Troy-Bilt, Craftsman, or MTD mower. If you're comfortable checking your spindle pattern and swapping a blade yourself, this is a good option that should improve cut quality and grass collection over a worn-out stock blade. It's not a pro-grade commercial blade, but for weekly lawn maintenance, it gets the job done.

Blade Length: 21 inches (533 mm)

Blade Width: 2-1/4 inches (57 mm)

Blade Thickness: 9/64 inch (3.4 mm)

Air Lift Height: 1-1/8 inches (32 mm)

Center Hole Shape: Bow tie

Material: High-carbon steel with rust-resistant coating

Design: 3-in-1 (mulching, bagging, side discharge)

Package Quantity: 1 blade

This blade fits many 21-inch walk-behind mowers with a bow tie center hole spindle. Compatible Troy-Bilt models include TB105, TB110, TB115, TB120, TB125, TB130, TB130XP, TB140, TB160, TB160XP, TB200, TB210, TB220, TB230, TB240, TB270ES, TB270XP, TB280ES, TB290ES, TB320, TB330, TB360, TB360ES, and TB370. Compatible Craftsman models include M100, M105, M110, M115, M140, M210, M230, M250, M260, M270, M310, and M320. Also fits many MTD and Cub Cadet models with the same spindle pattern. Always verify your mower's center hole shape before purchasing.

If you own a 42-inch lawn tractor from Craftsman, Husqvarna, or Poulan, keeping a sharp set of mulching blades on hand is key to a healthy lawn. The UDC Parts 532134149 replacement blades come in a two-pack and are designed to directly replace OEM part numbers like 134149, 138971, and many others. These are pre-sharpened and coated with a safety paint that wears off during the first mow, so you get immediate cutting performance.

These blades are best suited for homeowners and DIYers who regularly mow medium to large yards with a riding mower. If you're tired of paying premium prices for OEM blades and want a reliable, budget-friendly alternative, this set is worth considering. Contractors with commercial mowing fleets might prefer higher-end options, but for typical residential use, these blades deliver solid results.

The blades measure 21 inches diagonally with a 2-1/4 inch width and a 5-point star center hole, matching the original specs. The mulching design includes an air lift that helps circulate clippings for finer cutting, which promotes faster decomposition. In practice, they produce a clean cut on standard turf grass and handle light debris well. The pre-sharpened edge stays sharp for several mows, and you can resharpen them when needed to extend their lifespan.

The steel construction feels sturdy, and the coating helps prevent rust during storage. Installation is straightforward if you have basic tools and a jack to lift the mower. The two-pack is convenient for replacing both blades at once or keeping a spare. One thing to note: the safety paint may leave a greenish residue on your lawn initially, but it disappears after a few minutes of mowing.

The main limitation is compatibility. While the list of supported models is extensive, not every 42-inch deck uses the same blade. Always verify your mower's model number before ordering. Also, if you mow in rocky or sandy conditions, the blade edge may dull faster than premium alternatives. Overall, for the price, these UDC Parts blades offer excellent value for routine lawn care. They're a smart choice for anyone with a compatible tractor looking to maintain a sharp, efficient mulching setup without breaking the bank.

The Yolvvetrx 04771200 lawn mower blades are a replacement set designed specifically for Ariens IKON X, IKON XL, Edge and Gravely ZT X, ZT XL zero-turn mowers with 52-inch decks. If you own one of those machines and need a fresh set of blades, this three-pack covers the entire deck. These blades measure 18 inches in length, 2-1/4 inches in width, and 0.158 inches in thickness, with a 5/8-inch center hole. They are built from heat-treated hardened steel and come with a protective surface coating to resist corrosion.

In real-world use, the hardened steel construction gives these blades noticeable rigidity. During high-speed rotation on a 52-inch deck, the blades stay true and resist flexing, which translates into a more consistent cut across wide swaths of grass. The balanced weight distribution helps reduce vibration, a key factor when you are spending hours on a zero-turn mower. Less vibration means less fatigue for the operator and less wear on the mower spindles over time. The 0.158-inch thickness adds durability compared to thinner blades, allowing them to handle thicker grass and occasional sticks or debris without bending out of shape.

These blades are best suited for homeowners with a few acres of lawn or light commercial users who maintain properties regularly. They are not designed for heavy-duty commercial mowing day in and day out, but for routine residential and light commercial use, they perform well. The protective coating helps prevent rust during storage and in damp conditions, which is a practical benefit if you store your mower in a humid garage or shed. One thing to note is that you must verify your deck size before ordering, as these only fit 52-inch decks. Double-check your mower model compatibility from the list provided.

On the downside, there are no user reviews yet, so long-term reliability data is limited. The coating may wear off over time if you frequently mow in sandy or abrasive conditions, but that is typical for most coated blades. Overall, the Yolvvetrx 04771200 blades offer a cost-effective replacement option for Ariens and Gravely zero-turn owners. If you are looking for a set of blades that deliver solid cut quality, reduced vibration, and corrosion resistance without the OEM markup, these are worth considering. They are a practical choice for anyone who wants to keep their 52-inch deck cutting clean without spending a premium.

Length: 18 inches

Width: 2-1/4 inches

Thickness: 0.158 inches

Center Hole Diameter: 5/8 inches

Quantity: 3 blades per pack

Material: Heat-treated hardened steel

Coating: Protective corrosion-resistant finish

Color: Black

Compatible Decks: 52-inch decks on select Ariens and Gravely zero-turn mowers

Ariens IKON X: 915177, 915225, 915222, 915223, 915332, 915205, 915330

Ariens IKON XD: 915266, 915267, 915335, 915341, 915343

Ariens IKON XL: 915227, 915239, 915201

Ariens Edge: 915254, 915285

Gravely ZT X and ZT XL models with 52-inch decks

Always verify your deck size and model number before purchasing.