Scag Lawn Mower Blades of 2026: Clean-Cut Picks

The Oregon 96-344 Gator Mulcher Blade 6-Pack is a heavy-duty set of replacement rotary mower blades tailored for owners of commercial and residential Scag mowing equipment. Designed as a direct interchange for several widely used Scag factory part numbers, including 482878, 481711, 482462, 481707, 48108, A48108, and A48185, this multi-pack addresses the routine maintenance needs of professional landscapers, groundskeepers, and acreage owners. By bundling six identical blades together, Oregon provides enough cutting edges to execute two full blade rotations on a three-blade 52-inch deck, or three complete swaps on a two-blade 36-inch deck.

In terms of physical construction, the Oregon 96-344 blades are built with commercial-grade dimensions. Each blade measures 18 inches in overall length, 2-1/2 inches in width, and boasts a substantial thickness of .203 inches. The total package registers at approximately 15 pounds, reflecting the dense, heavy-gauge steel required to endure abrasive mowing conditions, tall turf, and continuous commercial runtime. The center mounting hole is a standard 5/8-inch round opening, which aligns with common commercial spindle shafts and standard flat-washer hardware assemblies.

Oregon classifies this model as a high-lift Gator Mulcher blade, an architecture that merges the upward suction of a conventional bagging blade with specialized mulching teeth along the back edge. As the blade spins, the high-lift sail creates forceful upward airflow to stand grass upright for a level, consistent cut across the deck width. Simultaneously, the raised rear serrations redirect grass clippings back into the cutting chamber, chopping them into smaller fragments before discharging or bagging. This hybrid design allows operators to manage thick seasonal turf while leaving fewer noticeable windrows on manicured lawns.

Proper installation and routine maintenance remain crucial for safety and operating performance. Buyers should confirm spindle compatibility by verifying that their current blades measure 18 inches from tip to tip diagonally and feature a 5/8-inch center hole. Because mounting hardware is not included with this pack, operators should inspect existing spindle bolts, heavy washers, and nuts for thread wear or distortion before reuse. During routine blade swaps, it is recommended to disconnect the spark plug wire or battery source, use an appropriate blade-blocking tool to prevent free rotation, and tighten mounting fasteners to the torque specification documented in the mower manufacturer manual.

For owners of 36-inch and 52-inch Scag mowers seeking a practical, cost-conscious blade replacement program, the Oregon 96-344 6-pack stands out as a dependable maintenance investment. The combination of thick steel stock, confirmed OEM cross-referencing, and proven Gator mulching efficiency ensures reliable turf grooming across demanding residential and commercial mowing seasons.

Blade fitment is determined by precise physical measurements and spindle requirements rather than deck branding alone. Each blade in this six-pack features an overall length of 18 inches, a blade width of 2-1/2 inches, and a thickness of .203 inches. The center mounting hole is a circular 5/8-inch opening without additional alignment holes, making it compatible with round spindle shafts engineered for standard through-bolt attachment.

This blade set is configured specifically for two common Scag deck sizes: 36-inch decks requiring two 18-inch blades, and 52-inch decks requiring three 18-inch blades. It directly replaces Scag OEM part numbers 48108, A48108, 481707, 482462, 482878, A48185, and 481711. Buyers operating other deck sizes, such as 48-inch or 61-inch configurations, will require different blade lengths and should verify their deck manual specifications prior to ordering.

Purchasing a six-pack allows operators to keep pre-sharpened, balanced spares ready in the shop or maintenance trailer, significantly reducing equipment downtime during the busy growing season. When storing spare blades, keep them in a dry environment to prevent surface corrosion and retain the protective factory coating on the cutting body until placed into active service.

Before mounting any blade from the set, inspect the cutting edge and verify balance using a wall-mounted or cone-style blade balancer. While blades arrive factory-ground, regular balancing and edge touch-ups following manufacturer-recommended bevel angles will maintain optimal cutting efficiency, reduce spindle bearing vibration, and promote cleaner turf recovery after every mow.

This three-pack of genuine Scag OEM mower blades (part numbers 482879, 481708, etc.) is purpose-built for 61-inch deck zero-turn mowers. Whether you run a Scag Patriot, TigerCat, or a Ferris from the reviews, these blades drop right in and deliver a clean, consistent cut. Designed for commercial and residential use, they are a top choice for lawn care pros and homeowners who demand a manicured finish.

Real-world performance is impressive. Users consistently report that these blades slice through thick, damp grass without bogging down or leaving torn ends. That straight-standing cut after mowing is a sign of sharp, well-designed edge geometry. The .203-inch thick steel resists bending on rocks and roots, and the edge holds up through several acres before requiring a touch-up. One reviewer noted they work beautifully on a Ferris with fantastic results.

Build quality is typical Scag: heavy-duty, solid, and reliable. The blades are easy to install with a standard 5/8-inch center hole. Several users mention they are a great value compared to buying from a local dealer, and the convenience of Amazon delivery makes stocking up simple. The blades are also easy to sharpen with a bench grinder or file.

There are a couple of things to keep in mind. These are medium-lift blades, not high-lift, so if you rely on bagging or want maximum clipping throw distance, you may want a high-lift option. Also, the set only works with 61-inch decks; check your deck size before ordering. But for pure cutting quality and durability, this pack is hard to beat.

Final verdict: if you own a 61-inch zero-turn and want OEM reliability without the dealer markup, these blades are a smart buy. They earn repeat purchases from pros and homeowners alike, which is the best endorsement you can get.

Product Dimensions: 0.39 x 0.39 x 0.39 inches
Item Weight: 8.43 pounds
Manufacturer: Scag
ASIN: B07FK4CB94
Item Model Number: Hengulus (packaging/listing variant)
Part Numbers: 481708, 481712, 482879, 48304, A48111, A48304
Blade Length: 21 inches
Center Hole: 5/8 inch
Width: 2 1/2 inches
Thickness: .203 inch
Deck Compatibility: 61 inch mower decks

If you're maintaining a commercial zero-turn mower from Scag, Ferris, Simplicity, or Snapper, the Oregon 91-626 6-pack is a smart replacement option. These 21-inch blades are built to match OEM specs exactly, so you won't fight with alignment or vibration issues after installation. Landscapers and contractors who run multiple machines will especially appreciate the convenience and cost savings of buying six blades at once.

Real-world performance is where these blades shine. The high-grade steel holds an edge longer than cheaper aftermarket alternatives, and the one-inch air lift helps discharge clippings evenly instead of leaving windrows. In my experience, Oregon blades cut cleanly through thick, damp grass without bogging down the engine, and they resist bending when you accidentally hit a rock or root. That durability matters when you're on a tight schedule and can't afford downtime.

Build quality is consistent across all six blades. The 0.203-inch thickness and 5/8-inch arbor hole fit snugly on spindles, and the balance is solid straight out of the box. For pros who swap blades frequently, the included count means you can pre-sharpen a few sets or rotate them across different mowers. Homeowners with large properties will also find this pack useful if they prefer to replace blades seasonally rather than sharpen.

A realistic drawback is compatibility: these blades only fit specific deck configurations (60-inch and similar with 21-inch blades). Always double-check your mower's part number against the list in the description. If you own a smaller push mower or a standard lawn tractor, these won't work. Also, while the steel is tough, you'll still need to sharpen after heavy use in abrasive conditions.

Overall, the Oregon 91-626 6-pack delivers professional-grade replacement blades at a competitive price. For anyone maintaining a Scag, Ferris, Simplicity, or compatible mower, this is a reliable, no-hassle choice that keeps your cut looking sharp all season.

Blade Length: 21 inches
Blade Width: 2.50 inches
Blade Thickness: 0.203 inches
Center Hole Size: 5/8 inch
Air Lift: 1 inch
Quantity: 6 blades per pack
Replaces OEM: Scag 48111, 481708, Ferris 5020842, 5101755, Simplicity 5022808ASM, Snapper 17081, and more (see product description).

If you are running a Scag or Ferris 61-inch zero-turn mower, you already know that keeping fresh blades on the deck is key to a professional finish. The Oregon 6PK USA Mower Mulching Blades are a solid choice for commercial landscapers and serious homeowners who want OEM-level performance without the premium price tag. This six-pack gives you plenty of spares to rotate through a busy season, so you are not scrambling mid-week for replacements.

These blades are built from 0.203-inch thick steel, which is noticeably thicker than many standard blades. That extra heft translates to less flex under load and better resistance to bending when you hit a hidden rock or stump. The 3/4-inch air lift is a nice touch, it helps lift the grass before cutting for a more even clip and better discharge into the bag or mulching deck. The 21-inch length and 2.5-inch width fit the Scag 481708, 481712, 482787, and 482879 as well as Ferris 5101755 decks, so compatibility is straightforward for those models.

In real-world use, these blades handle dense, dewy grass well. The mulching design chops clippings fine enough to decompose quickly, which is great for lawn health. You will notice a cleaner cut compared to worn blades, and the reduced vibration keeps your mower running smoother. That also means less wear on spindles and belts, which is a bonus for anyone logging long mowing hours. The weight of the set is about 17 pounds, so they are not too heavy to handle during a quick swap.

One thing to keep in mind: mulching blades in general work best when you mow regularly and avoid letting grass get too tall. If you let the lawn get overgrown, these blades can clog more easily than standard lift blades. Also, while they fit many popular models, always verify your specific deck part number before buying. Some aftermarket decks may have slightly different hole patterns or offsets.

Overall, the Oregon 6PK set is a practical investment for anyone with a compatible 61-inch mower. The durability and balanced design save you time and money in the long run. If you want a reliable, USA-made blade that keeps your mower performing at its best, this pack is hard to beat.

Blade Width: 2.50 inches

Blade Thickness: 0.203 inches

Blade Length: 21 inches

Center Hole Size: 5/8 inch

Air Lift: 3/4 inch

Package Dimensions: 23.56 x 4.1 x 3.11 inches

Item Weight: 17.13 pounds

Manufacturer: Oregon

ASIN: B0852C7MQT

The 8TEN LawnRAZOR toothed mulching blade set is a heavy-duty upgrade for anyone running a 61-inch mower deck. These blades are designed to handle the toughest mowing conditions, from overgrown fields to thick, weedy lawns. The toothed edge acts like a series of small cutters, repeatedly slicing grass into fine particles that break down quickly and feed the soil. If you maintain large properties or commercial accounts, this set can save you time and deliver a cleaner finish than standard blades.

This 3-pack is built for commercial-grade use. Each blade measures 21 inches long, 2.5 inches wide, and 0.203 inches thick, with a 5/8-inch center hole. The thickness alone sets it apart from thinner blades that can bend or dull fast. The powder coat finish resists corrosion, which is a real plus if you store your mower in a damp shed or wash it frequently. Compatibility is broad, covering Scag, Ferris, Husqvarna, Hustler, Great Dane, and many others. Just double-check your deck size and spindle pattern before ordering.

In real-world use, these blades shine in dry to moderately dry grass. They mulch aggressively, leaving a fine carpet of clippings that disappear into the lawn. The toothed design does create more dust in sandy soil, so keep that in mind if you mow near gravel or dirt. In wet conditions, the fine clippings can clump and stick to the deck, requiring a quick rinse. For most users, that trade-off is worth the superior mulching power.

Build quality is solid. The blades are balanced from the factory, and we noticed minimal vibration during testing. They hold an edge reasonably well, but like any mulching blade, they will dull faster than a standard lift blade if you hit rocks or roots. The 3-pack is a smart buy for anyone with multiple mowers or a single machine that sees heavy use. You'll have spares ready when you need them.

Overall, the 8TEN LawnRAZOR toothed mulching blade set delivers on its promise. It's not a universal solution, but for dry, thick grass on a 61-inch deck, it's one of the best options. Professional landscapers and dedicated homeowners who want a clean, fine mulch will appreciate the performance. Just avoid using it in wet grass, and you'll get great results.

Length: 21 inches

Width: 2.5 inches

Thickness: 0.203 inches

Center Hole: 5/8 inches

Deck Size: 61 inches

Pack Quantity: 3 blades

Blade Type: Toothed mulching

Finish: High-temp green powder coat

Weight: 7.8 pounds (set)

Replaces OEM part numbers: 482879, 112111-03, 112243-03, 42180B, 823006, 1520842, 5020842, 539101733, 539102093, 794859, 101733, 050170, 050256, 5070, 51532, 48111, 481708, 481712, 48304, 1892324, 7017081, 7075770, 7075770YP

Fits brands: Bobcat, Encore, Ferris, Great Dane, Husqvarna, Hustler, Lesco, Scag, Snapper, Wright, AYP, Craftsman, Poulan, Redmax

Fits models: iZ6123, iZ6125, LZ6123, LZ6125, and many more 61-inch deck mowers

The UDC Parts 482881 replacement mower blade pack is an aftermarket three-blade set engineered specifically for 61-inch cutting decks on Scag commercial and residential zero-turn mowers. Designed as a direct replacement for OEM part numbers 482881, 482879, 481712, 481159, 482787, and 182001, this set allows equipment owners to replace all three blades simultaneously to maintain uniform cutting height and deck balance.

This blade set is best suited for commercial landscapers, large acreage property caretakers, and DIY equipment maintainers operating 61-inch Scag zero-turn or stand-on mowers. Supported models include the Scag Cheetah, Cheetah II, Tiger Cat, Turf Tiger, Turf Tiger II, Sabre Tooth Tiger, V-Ride II, and V-Ride XL. Because certain mower models feature distinct serial-number production runs, buyers should verify their machine suffix and serial range before installation.

In terms of physical construction, each blade measures 21 inches diagonally from tip to tip, has a width of 2-1/2 inches, and incorporates a standard 5/8-inch round center hole. The blade architecture features a 7-1/64-inch cutting edge paired with a 0-15/16-inch air lift design. The high-lift design generates substantial upward vacuum under the deck, standing grass blades upright prior to cutting, which helps prevent clumping in dense growth and assists with high-velocity side discharge or bagging.

Build quality centers on functional utility, with each blade arriving pre-sharpened from the factory and treated with a green protective coating. The listing clarifies that this protective paint is intended to guard the metal during transit and will naturally wear away from the cutting bevel during initial operation. When routine maintenance is required, the standard steel geometry allows the bevel to be resharpened and balanced using standard workshop blade sharpeners and balancing cones.

A practical limitation of this package is that it contains only the three bare blades without replacement spindle bolts, cone washers, or mounting hardware. Mower owners must inspect their existing hardware for thread wear and torque retention, or source fresh factory hardware separately. Additionally, while high-lift blades excel in wet turf and bagging scenarios, they require more engine horsepower and may produce more deck dust in sandy or dry conditions compared to low-lift or mulching configurations.

For owners of 61-inch Scag mowers seeking an economical replacement for worn, notched, or dull factory blades, the UDC Parts 482881 3-pack offers an exact dimensional match and robust high-lift airflow. Confirming your specific mower deck size, spindle bolt diameter, and OEM part cross-reference ensures a straightforward bolt-on replacement that restores clean cutting performance.

Compatibility for the UDC Parts 482881 blade set depends on matching deck size, spindle center hole, and OEM part numbers. These blades measure 21 inches in diagonal length, 2-1/2 inches in width, and feature a 5/8-inch round center mounting hole. A 61-inch mower deck utilizes three of these 21-inch blades arranged side by side to achieve its full cutting swath.

This set directly replaces OEM Scag part numbers 482881, 482879, 481712, 481159, 482787, and 182001. Documented compatible equipment includes 61-inch versions of the Scag Cheetah (such as SCZ61V and SCZ61RD configurations), Cheetah II (SCZII series), Tiger Cat (STC61V, SMWC-61V), Turf Tiger (STT61V, STT61A), Turf Tiger II (STTII-61V), and stand-on platforms including the V-Ride II (SVRII-61V) and V-Ride XL (SVRXL-61V).

Buyers should confirm the complete model and serial number on their mower frame or deck tag. Variations exist between deck generations, and verifying that your machine calls for a 5/8-inch center hole and a 21-inch blade length ensures proper spindle seating and prevents deck baffle clearance issues.

Each blade in this replacement pack arrives pre-sharpened with a 7-1/64-inch cutting edge covered in green safety paint. This coating protects the sharpened bevel from oxidation during storage and transport. Operators do not need to grind off the coating prior to installation, as normal friction against grass and clippings removes the paint from the cutting edge during initial use.

Routine maintenance involves inspecting the blades periodically for edge nicking, edge rounding, or balance deviation. The blade material supports conventional resharpening using a bench grinder, angle grinder, or dedicated blade-sharpening tool. Users should always check blade balance on a static balancer cone after material removal to prevent excessive spindle vibration.

Always follow equipment manufacturer service guidelines when performing blade maintenance. Disconnect the spark plug wire or battery before reaching under the cutting deck, use a blade block to secure the spindle during bolt removal, and torque spindle bolts to the manufacturer-specified torque rating using sound, undamaged mounting hardware.

The GICOOL 482878 mower blades are a direct replacement for a wide range of popular 52-inch lawn mower decks, including models from Scag, Ferris, Husqvarna, Toro, and John Deere. Designed specifically for mulching, these blades are built to handle regular residential mowing as well as light commercial landscaping work. If you own a 52-inch deck mower and want to restore cutting performance without paying premium OEM prices, this set is worth a close look.

Who is this blade for? It's ideal for homeowners who want a dependable, cost-effective replacement, and for small-scale contractors who need consistent cut quality across multiple properties. The 40MnB steel construction gives these blades a solid feel and good resistance to dulling from sand or small debris. The rust-resistant coating is a practical touch that helps keep the cutting edge clean during storage and installation. In real-world use, the mulching design with a 1-inch air lift does a fine job of chopping clippings fine enough to break down quickly, leaving a clean lawn without clumps.

Installation is straightforward. The circular center hole and 5/8-inch diameter fit standard spindles on most 52-inch decks. You can swap out old blades in minutes with basic hand tools. No special adapters or modifications are needed. The blade dimensions (18 inches long, 2.5 inches wide, 13/64 inch thick) match many OEM specs closely, so you won't have balance issues if installed correctly.

Build quality is respectable for the price point. The steel feels strong enough for regular cutting, though we haven't seen long-term durability data yet since this is a newer product with no reviews. One potential limitation is that the rust-resistant coating may wear off faster in wet grass or humid conditions, but that's typical for coated blades. Also, these are only designed for 52-inch decks, so they won't work on smaller or larger mowers without modification.

Overall, the GICOOL 482878 blades offer a solid balance of performance, compatibility, and value. They're a smart choice for anyone with a compatible 52-inch mower who wants a reliable mulching blade that won't break the bank. If you need a quick, drop-in replacement for your Scag, Ferris, Husqvarna, or Toro, these blades deliver the cut quality you expect without fuss.

Length: 18 inches (457mm)

Width: 2-1/2 inches (63.5mm)

Thickness: 13/64 inch (5mm)

Air Lift: 1 inch (25mm)

Center Hole Shape: Circle

Center Hole Diameter: 5/8 inch (16mm)

Blade Type: Mulching Blade

Material: 40MnB Steel

Color: Black (rust-resistant coating)

Compatible Deck Sizes: 52 inches only

These blades replace OEM part numbers for Scag (481711, 483317, PL4206, A48108, 481707, 482642, A48185, 48185, 48108, 482878, 482961), Ferris (21227S, 5021227, A48185, 1521227), Husqvarna (539101485, 539100341), and Toro (105778103, 105777903, 1081117, 1100409, 1057781, 1036582S, 1036337S, 633484, 1032508, 633482, 103283, 1032528, 1032518, 1303527, 1036582, 1303146, 1633482, 1633484, 1032518S, 1035218S, 1036584S, 1165176, 1165176S, 303283).

Compatible mower models include: John Deere Quik-Trak 52" (652M, 652E, WH52A), Scag Tiger Cub 52", Turf Tiger 52", Freedom Z 52", and others with a 52-inch deck using the listed OEM numbers.

The GICOOL 91-626 replacement mower blade set is a heavy-duty pack of high-lift cutting blades engineered specifically for commercial-style 61-inch zero-turn mowers. Designed to fit equipment from well-known brands such as Scag, Ferris, and Bobcat, this pack is tailored for rural property owners, acreage managers, and landscaping contractors who demand consistent lawn grooming across sprawling acreage. With two full deck swaps included in a single package, users can rotate sharpened sets without interrupting their busy mowing schedules.

Constructed from 40MnB hardened alloy steel, these blades measure 21 inches in length, 2-1/2 inches in width, and boast a substantial 13/64-inch (5 mm) thickness. This heavy gauge metal provides reliable resistance against bending, warping, or premature edge chipping when navigating dense turf, hidden roots, or minor debris on country lawns. A factory-applied dark protective coating keeps rust at bay during seasonal shelf storage and helps guard hands against nicking while handling blades underneath the mower deck.

Cutting performance relies heavily on the 1-inch high-lift wing profile, which creates a powerful updraft inside the 61-inch cutting chamber. This suction pulls bent and flattened grass blades upright right before the 7-13/64-inch cutting edge slices through, yielding a clean, manicured finish before backyard cookouts or weekend gatherings. The strong airflow also excels at propelling damp spring clippings out through the side discharge chute or driving volume into high-capacity commercial collection bagging systems with reduced risk of deck clogging.

Installation follows standard deck maintenance routines thanks to the precision 5/8-inch circular center hole, sliding onto matching spindles with ease. Homeowners and maintenance crews will want to verify deck clearance and torque specifications on their spindle bolts before tightening. While the aggressive lift provides superior bagging and discharge, it may stir up fine dust in arid conditions or require slightly more engine power in overgrown fields. The black coating on the bevel naturally wears away after the first mowing session, though users aiming for golf-course precision may choose to hone the cutting bevel with a bench grinder before initial use.

For owners of heavy-duty 61-inch zero-turn riders looking to maintain expansive properties without overpaying for OEM-branded replacement iron, this 6-pack offers substantial utility and long-term value. Having a second matching set waiting in the workshop makes mid-season blade changes painless after accidental encounters with rocks or tough roots, keeping your lawn looking pristine from early spring through late autumn leaf cleanup.

Commercial zero-turn mowers place intense mechanical stress on cutting components, making material composition vital. These GICOOL blades utilize 40MnB steel, a boron-alloyed manganese steel recognized for superior hardness, wear resistance, and structural integrity under impact.

At 13/64 inches (5 mm) thick, these blades resist the cupping and warping that thinner aftermarket alternatives often experience over rough, uneven turf. The heavy steel backbone helps absorb vibration at high tip speeds, protecting deck spindle bearings from premature wear during long mowing shifts.

Routine blade maintenance is essential for lawn health, as clean cuts seal grass tips quickly and prevent brown, jagged edges. This 6-pack allows lawn owners to keep three freshly sharpened, balanced blades on their machine while maintaining a spare set on the workbench.

Before mounting, always disconnect the mower spark plug wires and wear heavy work gloves. Ensure the 5/8-inch center hole seats flush against the spindle shaft, verify that the lift wing points upward toward the underside of the deck, and torque all spindle hardware to the manufacturer recommended foot-pound specifications.