Mower Blade Decker of 2026

The MaxPower 33119BDB is an aftermarket replacement mulching blade built specifically for Black & Decker battery-powered lawn mowers. If you own an older cordless unit like the CM1936 or CMM1200, tracking down factory replacement parts can be a frustrating exercise. This blade steps in as a direct drop-in replacement for OEM part number 90541433-01, giving DIY homeowners an easy way to restore crisp, clean cutting to their yard care equipment.

On an electric or battery mower, blade balance and weight matter significantly. Heavy, poorly balanced aftermarket blades can introduce vibration and sap precious runtime from the motor. At roughly 1.44 pounds and measuring 18.35 inches long by 1.77 inches wide, this blade keeps rotating mass right where the factory motor expects it. The curved mulching design lifts grass stalks upright before slicing them into fine clippings, ensuring clean deck airflow without bogging down your motor in thick turf.

The steel measures approximately 0.138 inches thick and features a tough black powder coating to resist moisture and premature surface rust during storage. The overall steel temper holds up well against hidden lawn debris, pinecones, and occasional roots. While the blade arrives painted and ground, running a mill file or grinder across the cutting bevel before mounting will give you that razor-sharp cut right out of the gate.

Keep in mind that fitment is narrow by design. It is built strictly for the specified Black & Decker deck configurations, so you must verify your mower model and old blade profile prior to purchasing. For anyone running an operational CM1936 or CMM1200, this MaxPower replacement provides reliable cutting performance and extended life for your battery equipment at a fraction of the original equipment price.

This blade directly replaces Black & Decker OEM part number 90541433-01. It is designed to mount properly to Black & Decker CM1936 and CMM1200 cordless mower models.

Key measurements include an overall length of 18.35 inches, a width of 1.77 inches, and a steel thickness of 0.138 inches. Always disconnect the mower battery safety key before swapping or servicing blades in your workshop.

The UDC Parts 532180054 lawn mower blades are a high lift mulching set designed for 48 inch riding mower decks. They replace OEM part numbers from Husqvarna, Craftsman, and Poulan, making them a direct drop-in upgrade for many popular models like the YTH24V48, YTH2348, and Craftsman CMXGZAM110149. These blades measure 16-3/4 inches diagonally with a 2-1/2 inch width and a 5-point star center hole.

These blades are best suited for homeowners and DIYers who want better mulching and a cleaner cut without spending a fortune on OEM parts. Users with older mowers especially notice a huge difference in cut quality and noise level. The high lift design pulls grass up for a more even cut and then mulches clippings into fine particles that settle into the lawn, reducing the need for bagging.

Performance is where these blades shine. Many reviews mention a dramatic improvement in cut quality, with grass cut cleanly and evenly. The mulching action is so effective that clippings virtually disappear. The blades also run quieter than stock blades, producing a soft hum instead of the typical roar. Build quality is solid - made from high-strength steel that holds an edge well. The 3-pack provides good value, and installation is straightforward with no modifications needed.

There are a few limitations to consider. The aggressive lift can bog down the mower in very thick or wet grass, so you may need to slow down or raise the deck slightly. Some users recommend checking blade balance before installation to avoid vibration. Also, these are specifically for 48 inch decks, so verify your deck size before buying. Overall, these blades offer excellent performance and value for anyone with a compatible 48 inch mower looking to upgrade their cut quality and mulching.

Dimensions: Length 16-3/4 inches (measured diagonally), Width 2-1/2 inches, Thickness 0.187 inches, Center Hole 5 point star, Air Lift 1-7/32 inches, Cutting Edge Length 5-43/64 inches, Compatible Deck Size 48 inches.

Package Dimensions: 17.28 x 3.15 x 2.2 inches. Item Weight: 6.41 pounds. Manufacturer: UDC Parts. ASIN: B0CPM4XKVV.

Replaces OEM Parts: Husqvarna 532180054, 180054, 532173920, 173920, 539107519, 575938201, Craftsman CMXGZAM110149.

If you are running a 54-inch riding mower from Husqvarna, Craftsman, Poulan, or any of the compatible brands listed, the UDC Parts 532187256 high lift blades might be the best upgrade you can make this season. These are not your typical stamped steel replacements. They are thicker, heavier, and designed with an aggressive air lift that pulls grass up straighter before cutting it, which gives you a more professional looking lawn without extra passes.

Who should buy these? Homeowners with a Z254, YTH24V54, LGT2654, or similar model who want to stop bagging clippings. These blades mulch fine enough that you can leave the clippings where they fall. They also work great for anyone tired of the noisy roar from standard blades. The reviews are consistent: users report a dramatic drop in noise, sometimes thinking the blades are not engaged because the sound is so much quieter. The 0.203 inch thickness adds durability, and the three-pack covers a full 54-inch deck, so you replace all blades at once.

In real-world use, these blades shine on dry to slightly damp grass. The vacuum lift pulls up bent-over grass and leaves no uncut stragglers. The cut is clean and even. However, because they suck up so much air, they will also pick up loose soil or sand if you scalp bare spots. That is a trade-off worth knowing. Also, in very tall or wet grass you might bog down the engine or overload the belt, so stick to standard mowing conditions. Installation is straightforward: remove the old blades, center the five-point star hole on the spindle, torque to spec, and you are done.

Build quality is solid for the price. Many users say these blades feel heavier than OEM, and they hold an edge through multiple mowing seasons with normal use. The heat treatment and balance appear consistent out of the box, as there are no reports of excess vibration. The design is a direct copy of the popular Gator blades but at a lower cost. Customer service from UDC Parts is also a plus, as some reviews highlight quick responses to compatibility questions.

If there is a downside, it is the need to be careful around loose debris and the possibility of needing to adjust your mowing speed in heavy grass. But for the vast majority of mowing sessions, these blades boost performance significantly. They make your lawn look better, your mower run quieter, and your weekends shorter. For any DIYer or homeowner with a compatible 54-inch deck, this three-pack is a smart, budget-friendly upgrade that delivers real results.

The UDC Parts GY20850 mower blades are a set of two mulching blades designed specifically for John Deere 42-inch lawn tractor decks. They replace a host of OEM part numbers including GY20850, GX22151, AM141033, and many others, making them a versatile drop-in upgrade for a wide range of models. Whether you own a D100, E100, S100 series, X300, or Z225, these blades are engineered to fit without any modifications.

Who should buy these blades? They are best suited for homeowners and DIYers who mow their own lawns and want professional-grade results without paying dealership prices. Contractors who maintain multiple properties will also appreciate the consistent cut quality and long blade life. If you prefer a manicured lawn with no clippings left behind, these mulching blades are an excellent choice.

Real-world performance is where these blades shine. Users consistently report a dramatic improvement in cut quality - the grass is cut cleanly and evenly, with the mulching action completely disintegrating clippings so there are no piles left to rake or re-mow. The blades operate with a noticeably quieter hum compared to standard blades, which reduces noise fatigue during long mowing sessions. The vacuum-like lift stands grass up for a more uniform cut, but it also means you should avoid running over hoses or debris.

Build quality is solid: the blades are made from premium high-strength steel that holds its edge well. They come pre-sharpened with a protective paint coating that wears off after the first use. Installation is straightforward - just remove the old blades, bolt on these, and you're ready. The balanced design minimizes vibration, which is easier on your mower's spindle bearings.

There are a couple of realistic drawbacks to consider. The aggressive mulching action can suck up small objects, so a quick lawn sweep is recommended before mowing. Also, if you prefer bagging your clippings, these blades may not perform as well as dedicated bagging blades - they are optimized for mulching. The safety paint may look dull initially, but it quickly disappears.

Overall, the UDC Parts GY20850 mower blades offer exceptional value. They deliver OEM-level or better performance at a fraction of the cost, backed by thousands of positive reviews. If you want a cleaner cut, less noise, and fewer clippings, these blades are a no-brainer upgrade for your John Deere 42-inch mower.

Blade Length: 21-3/8 inches (measured diagonally)

Blade Width: 2-3/4 inches

Thickness: 0.164 inches

Center Hole: 7-point star

Air Lift: 1 inch

Cutting Edge Length: 5-7/16 inches

Compatible Deck Size: 42 inches

Package Dimensions: 21.89 x 3.15 x 1.93 inches

Item Weight: 5.15 pounds (per pack of 2)

Manufacturer: UDC Parts

These blades replace John Deere OEM part numbers: UC21583, GX22151, GY20850, AM141033, AM137333, AM141034, AM141031, M154062, M145970, AM137327, AM141032, AM137329.

Compatible with John Deere 42-inch mower decks on models: 102, 105, 115, 125, 135, D100, D105, D110, D120, D125, D130, E100, E110, E120, E130, LA100, LA105, LA110, LA115, LA120, LA125, LA135, S100, S110, S120, S130, X105, X106, X107, X110, X120, X125, X126, X145, X305R, Z225, Z235, X300 (42-inch X Edge Deck), X304 (42-inch X Edge Deck), X310 (42-inch Edge Deck), X500 (42-inch Edge Deck), X520 (42-inch Edge Deck), SST15 (42C Deck), SST16 (42C Deck), LT160 (42C Deck), LT180 (42C Deck), S240 (42C Inch Deck).

Note: Parts may differ between different configurations of the same mower model. Please confirm your complete model number and deck type to ensure a proper fit.

If you own a 42-inch deck riding mower from Craftsman, Husqvarna, or Poulan Pro and need fresh blades, the Grasscool 138971 replacement set is worth a close look. These are high lift blades designed for better grass discharge and a cleaner cut, especially in thicker or damp conditions. They come with a 5-point star center hole that matches many popular models including the Craftsman T110, LT1000, LT2000, and Husqvarna YTH18542. Before ordering, double check that your mower uses a 5-point star adapter, not a 6-point, because these won't swap over.

Performance wise, these blades do exactly what you'd expect. They slice through grass cleanly and the high lift design helps toss clippings into the bag or out the chute without leaving clumps behind. Multiple reviews mention that the blades are balanced well out of the box, which means minimal vibration during operation. That's a big plus for comfort and for reducing wear on the spindle assembly. For homeowners and DIYers cutting a couple of acres weekly, these hold up nicely. The steel is heat treated and the cutting edges come with a protective paint coating that resists rust, though it will wear off after a few mowings as the blades do their job.

Build quality is solid at this price point. Grasscool puts these through hardness, balance, and performance tests, and that shows in the consistency of the product. The blades are slightly thicker than some OEM options, which adds stiffness but might add a little extra weight. For most riders that won't matter, but if your mower is on the lighter side you may notice a small difference in engagement feel. Installation is straightforward if you're comfortable with a socket wrench, and the blades line up perfectly with the 5-point star pattern.

One realistic limitation is the star point compatibility. There are two common patterns for these Craftsman-style mowers, and ordering the wrong one is a common mistake. Also, a few users noted that on Poulan Pro models the fit can be a bit tight, so measure carefully. That said, the vast majority of buyers report a perfect fit and improved cutting performance over worn OEM blades.

Overall, the Grasscool 138971 high lift blades are a smart buy for anyone who wants reliable performance without spending top dollar. They're best suited for homeowners, DIYers, and light commercial users who maintain their own equipment. If you confirm the 5-point star pattern and match your model from the compatibility list, you'll get smooth operation and a clean lawn at a fraction of the cost of name-brand replacements.