Lawn Mower Blades Suppliers of 2026: Clean-Cut Picks

The BCQNXX 5101755S high lift blades are a solid aftermarket replacement option for 61-inch mower decks. Designed to fit a broad range of zero-turn mowers from Ferris, Scag, Bad Boy, Husqvarna, and others, these blades are built to handle tough mowing conditions. Each pack includes three blades, giving you a complete set for most three-blade decks.

These blades are best suited for homeowners with large lawns or commercial landscapers who need reliable cutting performance in dense grass. The high lift design creates strong airflow, which helps discharge clippings evenly and improves mulching efficiency. If you frequently mow tall or wet grass, you will appreciate the extra lift.

In real-world use, the extended cutting surface allows these blades to slice through thick vegetation without bogging down. The heavy-duty metal construction holds up well against rocks and roots, and the powder-coat finish adds a layer of rust protection. Installation is straightforward thanks to the standard 21-inch length and 5/8-inch center hole.

Build quality is good for the price point. While they are not quite as thick as some OEM blades, they offer a nice balance of durability and cost. You may need to sharpen them more often if you mow over rough terrain frequently, but that is typical for aftermarket blades.

Overall, the BCQNXX 5101755S blades are a practical choice for anyone looking to replace worn blades on a 61-inch deck without breaking the bank. They deliver dependable performance and broad compatibility. Just be aware that they are designed specifically for high lift applications, so they may not be ideal for decks that rely on side discharge only.

Package includes: 3 blades

Length: 21 inches

Width: 2.5 inches

Thickness: 0.197 inches

Center hole: 5/8 inch

Deck size: 61 inches

Material: Heavy-duty metal with powder-coat finish

Type: High lift

This 3PK blade set is designed for 52-inch zero-turn mowers from many of the biggest names in the industry. If you own a Ferris, Scag, Encore, Bobcat, Husqvarna, John Deere, or Toro machine with a 52-inch deck and uses 18-inch blades, these are a direct replacement. They are not universal; they ship as a matched set of three, all with the same 2.5-inch width and 0.203-inch thickness.

These blades are best suited for lawn care pros and property owners who cut multiple acres weekly. The steel is notably tough and holds an edge well through thick grass and occasional debris. The 1-inch air lift generates good airflow for side discharge or bagging, which helps prevent clumping even in damp conditions. In our experience, they cut cleanly without tearing grass, leaving a professional finish.

Build quality is solid. Each blade is stamped from heavy-gauge steel and the cutting edge comes sharp. The center hole is precisely punched to 5/8-inch, and the blades spin true without excessive vibration when properly torqued. We did notice they are slightly heavier than some OEM blades, but that added mass helps with momentum through thick grass. For durability, these should last a full mowing season with regular sharpening.

One drawback is that you need to verify your mower's blade specifications before ordering. Some newer models may use different offsets or diameters. Also, if you mow in very sandy soil, you may need to sharpen more often. That said, for the price of a 3-pack, you get solid performance and a massive compatibility list. These are not for every deck, but for the ones they fit, they are a reliable choice.

If you are a contractor or homeowner looking to restore cut quality on a 52-inch zero-turn, this 3PK set is a smart buy. The combination of fit, durability, and value is hard to beat. Just double-check your mower model against the compatibility list provided by the seller, and you should be back to mowing with confidence.

If you are running a Scag or Ferris 61-inch zero-turn mower, you already know that keeping fresh blades on the deck is key to a professional finish. The Oregon 6PK USA Mower Mulching Blades are a solid choice for commercial landscapers and serious homeowners who want OEM-level performance without the premium price tag. This six-pack gives you plenty of spares to rotate through a busy season, so you are not scrambling mid-week for replacements.

These blades are built from 0.203-inch thick steel, which is noticeably thicker than many standard blades. That extra heft translates to less flex under load and better resistance to bending when you hit a hidden rock or stump. The 3/4-inch air lift is a nice touch, it helps lift the grass before cutting for a more even clip and better discharge into the bag or mulching deck. The 21-inch length and 2.5-inch width fit the Scag 481708, 481712, 482787, and 482879 as well as Ferris 5101755 decks, so compatibility is straightforward for those models.

In real-world use, these blades handle dense, dewy grass well. The mulching design chops clippings fine enough to decompose quickly, which is great for lawn health. You will notice a cleaner cut compared to worn blades, and the reduced vibration keeps your mower running smoother. That also means less wear on spindles and belts, which is a bonus for anyone logging long mowing hours. The weight of the set is about 17 pounds, so they are not too heavy to handle during a quick swap.

One thing to keep in mind: mulching blades in general work best when you mow regularly and avoid letting grass get too tall. If you let the lawn get overgrown, these blades can clog more easily than standard lift blades. Also, while they fit many popular models, always verify your specific deck part number before buying. Some aftermarket decks may have slightly different hole patterns or offsets.

Overall, the Oregon 6PK set is a practical investment for anyone with a compatible 61-inch mower. The durability and balanced design save you time and money in the long run. If you want a reliable, USA-made blade that keeps your mower performing at its best, this pack is hard to beat.

Blade Width: 2.50 inches

Blade Thickness: 0.203 inches

Blade Length: 21 inches

Center Hole Size: 5/8 inch

Air Lift: 3/4 inch

Package Dimensions: 23.56 x 4.1 x 3.11 inches

Item Weight: 17.13 pounds

Manufacturer: Oregon

ASIN: B0852C7MQT

If you own a Greenworks 16-inch corded or cordless mower, the replacement blade under model 29512 is a straightforward upgrade that keeps your mower cutting like new. This blade is made from a single piece of alloy steel, which means there are no weak weld points that could fail over time. The forging process produces a rigid, durable edge that holds up well against grass, weeds, and even light debris. For homeowners who rely on their electric mower for weekly maintenance, this blade offers a clean, even cut without leaving ragged edges that can brown out.

The installation process is simple. You remove the old blade, line up the center hole, and bolt this one in place. The 15.75-inch length matches the factory specification, so your mower's cutting deck will operate at peak efficiency. Because it's designed specifically for Greenworks 16-inch models 25322 and 25242 (and many other 16-inch electric mowers), you won't have to worry about balance issues or poor fit. Just make sure you secure it with the proper torque and your mower will be ready to go.

In real-world use, this blade delivers consistent performance across different grass types and moisture levels. It does a good job mulching clippings and doesn't clog easily, thanks to its sturdy shape and sharpened edges. The one-piece steel construction also helps reduce vibration compared to blades with welded tips, which means less fatigue on your hands and arms during longer sessions. It's not the most aggressive blade on the market, but for a typical suburban lawn it's more than adequate.

Build quality is solid. The alloy steel resists bending if you hit a hidden rock or root, and the finish resists rust better than some cheaper alternatives. That said, like any mower blade, it will eventually need sharpening. If you mow frequently over tough grass or gravel, plan to touch it up with a file or grinder every few months. The lightweight design (just under 0.7 pounds) makes the blade easy to handle during maintenance, and it stores compactly in your workshop or garage.

One limitation is that it's not a universal blade. It only fits 16-inch mowers with the specific center hole pattern. Also, the package does not include new bolts or washers, so you'll need to reuse the original hardware or buy replacements if they're worn. For the price, this blade offers excellent value for DIY homeowners who want to extend the life of their Greenworks mower without spending on a new machine. It's a practical, reliable choice that gets the job done neatly.

Brand: Greenworks
Model: 29512
Fits: 16-inch electric mowers, including Greenworks 25322 and 25242
Blade Length: 15.75 inches (actual cutting width 16 inches)
Material: Alloy Steel, one-piece forged construction
Weight: 0.69 pounds
Dimensions: 15.75 x 1.97 x 0.71 inches
Compatible Power Sources: Corded Electric, Cordless Electric
Assembly Required: Yes (bolt to mower spindle)

This replacement blade is ideal for homeowners who maintain a small to medium-sized lawn with a Greenworks 16-inch electric mower. It's perfect for routine weekly mowing of Bermuda, fescue, or rye grass. Because it's designed for electric mowers, it pairs well with both corded and battery-powered units, making it a reliable backup or upgrade blade. If you want to keep your mower cutting cleanly without upgrading to a new machine, this blade is a smart, budget-friendly choice.

The BCQNXX high lift mower blades set is a solid aftermarket option for commercial mowers and walk-behinds. Designed to replace OEM parts for Scag, Ferris, Encore, and several other brands, these blades bring professional-grade cutting performance to your lawn care routine without the high price tag. The set includes three 18-inch blades with a 1-inch air lift, ideal for 36-inch decks (using two blades) and 52-inch decks (using all three).

Who benefits most from these blades? Commercial contractors mowing multiple properties daily will appreciate the sharpness and lift right out of the box. Homeowners with compatible mowers can also save money while getting a cut that rivals OEM equipment. The high lift design excels at clearing clippings from the deck and throwing them out the side discharge, leaving a clean stripe behind even in damp or thick grass.

In real-world use, these blades cut smoothly with minimal vibration. Several reviewers noted they came sharp and balanced, requiring only a quick pass with a grinder to remove the paint from the cutting edge. The steel feels robust, holding up well against sticks and occasional rocks. One commercial user reported over 20 cuts without noticeable dulling. However, if you mow in sandy soil, expect faster wear, as the steel may not be as hard as premium alloys.

Installation is straightforward. Just disconnect the spark plug for safety, lift the deck to its highest position, remove the flange nut, and swap the blade. The dimensions match OEM specs exactly, so there is no need for modification. The package includes three blades, which is enough for a full deck replacement on most 52-inch setups.

Overall, the BCQNXX high lift blades are a smart buy for anyone wanting solid performance at a lower cost. They deliver on lift, cut quality, and durability for the price. Just be aware of potential paint removal and sandy soil limitations. If you need reliable blades for a Scag Tiger Cub, Wildcat, Turf Tiger, or similar model, this set is worth considering.

The 8TEN LawnRAZOR Mulching Blade 2-Pack is a dedicated replacement cutting set engineered for 36-inch mowing decks on popular lawn tractors from MTD, Craftsman, and Troy-Bilt. Featuring two 18 3/16-inch blades with a diamond center hole design, this kit directly replaces OEM part numbers including 742-05535, 742P05535, and CMXGZAM110190. For homeowners who rely on dependable riding mowers like the Troy-Bilt Pony 36 or Craftsman T100, installing fresh mulching blades is one of the most effective ways to restore clean turf slicing and simplify routine property maintenance.

This replacement set is best suited for suburban homeowners, rural property owners, and lawn care enthusiasts who want to maintain an immaculate yard without hauling heavy grass clipping bags to the curb. Property managers and budget-conscious DIYers will also value the convenience of a matched pair that refreshes an entire 36-inch deck in a single step. Whether you manage a quarter-acre suburban lawn or a multi-acre countryside parcel, having sharp mulching edges ensures every mowing pass leaves behind tiny clippings that feed the soil rather than clumping into unsightly thatch.

In terms of cutting dynamics, the LawnRAZOR blades use a specialized mulching geometry that lifts grass blades for an even cut before circulating the clippings beneath the deck. By repeatedly slicing clippings into fine mulch, these blades minimize surface windrows across the lawn. This makes post-mowing cleanup exceptionally fast, as clearing grass clippings off the driveway, patio, or sidewalk with a handheld or cordless leaf blower takes only seconds. The design handles routine weekly mowing smoothly and tackles moderately damp grass or fallen autumn leaves with steady efficiency.

Build quality is solid, featuring durable steel construction with a distinctive green powder-coated finish that helps ward off rust while stored or working in damp early morning conditions. The blades measure 2 3/8 inches wide and weigh around 3.2 pounds as a pair, giving them the heft required to withstand incidental contact with small twigs, acorn caps, or light yard debris. The diamond center hole is specifically broached to fit S-pattern spindle assemblies securely, preventing blade slip and maintaining proper deck balance during high-speed rotation.

Installation is straightforward for anyone comfortable with basic garage tools. Swapping out dull, nicked blades takes minimal time once the mower deck is safely lowered or removed, requiring only standard socket wrenches to tighten down on the spindle hardware. Routine maintenance simply involves periodic visual inspections for balance, scraping wet grass buildup from under the deck, and occasional edge touch-ups after a heavy season of clearing fallen leaves and tough turf.

As with any replacement hardware, users should carefully verify their mower model and spindle pattern before ordering, because the diamond center hole will not mount onto round star or 6-point star spindles. Additionally, the painted edge quickly sheds its coating during the first few minutes of cutting, which is normal for coated mower blades. For homeowners seeking a cost-effective, high-performing replacement set that keeps grass looking professionally manicured and reduces weekend yard debris, this 8TEN mulching blade pair is a reliable and practical choice.

Mulching blades are designed to keep grass clippings suspended under the mowing deck for multiple cuts, turning long strands into nutrient-rich organic matter. The 8TEN LawnRAZOR blades feature curved lift sails that generate continuous airflow, recycling debris until it falls discreetly into the turf canopy.

This efficient mulching action drastically reduces the volume of yard waste left on top of the lawn. Homeowners can skip bagging clippings entirely, and any light overspray onto walkways or flower beds can be whisked away in minutes using a cordless leaf blower.

These blades are built to match OEM specifications for 36-inch deck models, including the Craftsman T100 and T85, Troy-Bilt Pony 36, 36B, and 36T, as well as select Columbia and Yard Machines units. The key fitment requirement is the 7/8-inch diamond center hole, which corresponds directly to S-pattern spindle shafts.

To maintain peak performance across every season, inspect blade edges after striking hidden roots or rocks. A quick sharpening session before spring mowing and proper cleaning after wet fall leaf cleanups ensure smooth operation, reduced engine strain, and a crisp, even cut every weekend.

The SporGain Lawn Mower Blade Balancer is exactly what it sounds like: a no-nonsense tool for ensuring your mower blades are balanced after sharpening. For anyone who sharpens their own blades whether you maintain a small suburban yard or a handful of rental properties, this little gadget is a sanity saver. After you take a grinder or file to your blade, you often end up with one side slightly heavier. That imbalance causes vibration, uneven cuts, and extra wear on your mower’s engine and deck.

This balancer solves that problem simply. You set the blade on the tapered metal cone, and the heavy side drops down. Then you remove a bit more metal from that side and repeat until the blade sits level. It’s a static balancer, meaning it relies on gravity and a smooth pivot point. It may not be as sensitive as magnetic models or as precise as electronic ones, but for typical lawn mowing work, it gets the job done. The cone has steps to accommodate different center hole sizes up to nearly two inches, so it fits most standard walk-behind mower blades and even some riding mower blades.

Build quality is impressive for the price. The base and cone are made of metal, not plastic, so they won’t crack or warp. It’s small enough to toss in a tool bag or leave in a drawer. The only potential drawback is that it won’t work with blades that have non-circular holes like some gator or mulching blades with keyed centers. Also, if your blade is truly bent or has uneven wear, the balancer will show that, but you might need to replace the blade rather than simply balance it.

In real-world use, this balancer makes a noticeable difference. Users report that after balancing blades that came off the shelf from the factory, they felt less vibration in the handles and heard a smoother running engine. One reviewer with a Honda HRX mower found that balancing blades he thought were fine completely eliminated a subtle vibration he never realized was there. For the money, you’re getting a simple, effective way to improve cut quality and extend your equipment’s life.

If you’re a weekend DIYer or a homeowner who sharpens your own blades, this balancer is a cheap upgrade that pays for itself in less engine wear. Professional landscapers who need absolute precision on multiple mowers might prefer a magnetic model, but for most people, this static balancer does exactly what it needs to. A solid buy.

Product Dimensions: 2.4 x 2.4 x 2.1 inches
Item Weight: 3.52 ounces
Material: Metal (zinc alloy base and cone)
Blade Hole Compatibility: Circular center holes up to 1.97 inches (largest step)
Base Diameter: 2.36 inches
Color: Silver
Includes: One blade balancer only

If you own a 42-inch deck riding mower from Craftsman, Husqvarna, or Poulan, you know how frustrating it is when your blades just aren't pulling their weight. The KOFINAM two-pack replacement blades step in with a high-lift design that seriously improves grass discharge. Instead of leaving wet clumps on your lawn, these blades keep the airflow moving, which helps bagging and side discharge work more effectively.

These blades measure 21 inches long, 2-5/16 inches wide, and 1/6 inch thick. The center hole uses a 5-point star pattern that fits a wide range of popular models, including Craftsman LT1000 and Husqvarna YTH18542. The build quality feels solid enough for residential duty. The steel resists bending when you accidentally hit a small branch or a rock, and the edges hold up through a few mowings before needing a touch up.

For homeowners who mow a medium to large lawn once a week, this set delivers reliable performance. The high lift really shines when you're cutting grass that's a bit tall or damp. You'll notice less clogging under the deck and a cleaner cut overall. The blades also reduce vibration because they come prebalanced, which saves your mower's spindles from unnecessary wear.

One honest limitation is that these blades are not a universal fit for every 42-inch deck. You should double check your mower's model number against the compatibility list. Also, while they work great for bagging and side discharge, some mulching setups may perform better with a dedicated mulching blade. But for the price, you get two robust blades that cover most popular OEM part numbers.

Overall, the KOFINAM replacement blades are a smart buy for DIY homeowners and weekend warriors who want a dependable, no-fuss upgrade. They offer better airflow, durable construction, and broad compatibility. If you're tired of uneven cuts and grass clumps ruining your yard's look, these blades are worth trying.