Nothing ruins a mowing session like a dull blade that shreds grass instead of slicing it. You know the feeling: the lawn looks ragged, the deck vibrates, and the engine strains to keep up. If you own a Greenworks machine, finding the correct Greenworks Lawn Mower Blades is the fastest way to restore that smooth, quiet operation. We analyzed the specifications for eight popular options to help you match the right steel and size to your specific model.
Compatibility is the biggest hurdle here. Greenworks uses various center hole patterns and blade lengths across their 16, 20, 21, 25, and 42-inch decks. A blade that fits a 21-inch model will not work on a 25-inch deck. By checking your model number against the removal guide, you can ensure the new part slides onto the spindle without forcing it. This careful matching prevents spindle damage and keeps your cut consistent.
Pros
- Restores sharp cutting performance with heat-treated steel
- Precise fit for Greenworks 25302 mower
- Easy to install and remove for maintenance
- Affordable solution compared to replacing the mower
- Sturdy build that handles typical yard debris
Cons
- Only compatible with specific Greenworks model (25302)
- Blade length is shorter than deck size, which may limit cutting width
- May need periodic sharpening or replacement depending on usage
These Greenworks replacement blades are a practical solution for anyone who owns the Greenworks 20-inch Twin Force mower (model 25302). Rather than replacing the entire mower when blades dull, you can simply swap in this set of heat-treated steel blades. The set includes one right and one left blade, designed to work together for balanced cutting.
This product is best suited for homeowners who already use the Greenworks 25302 mower and want to maintain its cutting performance. It's also a good option for budget-conscious shoppers who prefer to repair rather than replace equipment. The blades are intended for standard lawn mowing tasks around suburban yards, small properties, or even apartment complexes with modest grass areas.
According to the product specifications, the blades are made from heat-treated steel, which is known for holding a sharp edge longer than untreated steel. Each blade measures 9.5 inches in length, and the set is designed to fit the 20-inch deck. The actual blade length is about 1 inch shorter than the deck size to allow for proper clearance between the blade tip and the deck edge. This design helps prevent damage to the deck and ensures safe operation.
Installation is straightforward, as the blades are easily removable for sharpening or replacement. Many users find that swapping blades takes only a few minutes with basic tools. The blades are compatible only with the Greenworks 25302 model, so it's important to verify your mower model before purchasing. The product description does not mention any additional accessories or tools included, so you may need to use your own wrench for installation.
One realistic limitation is that these blades are not universal; they won't fit other mower brands or models. Also, because the blade length is slightly shorter than the deck, some users might notice a slightly reduced cutting width compared to the full deck size. However, this is a standard design feature for clearance and safety. For routine grass cutting, the performance should be satisfactory for maintaining a neat lawn.
Overall, these Greenworks replacement blades are a reliable and affordable maintenance option for owners of the 25302 mower. They help extend the life of your equipment and keep your lawn looking sharp. If you're looking for a simple way to restore cutting efficiency without a major investment, this set is a practical choice.
Pros
- Broad compatibility with many Greenworks 21-inch mower models no guesswork.
- OEM part means reliable fit, balance, and cutting performance.
- Easy to install and replace yourself without a dealer visit.
- Holds an edge well for a residential mowing schedule.
Cons
- Only fits mowers with the specific mounting pattern shown in the images double-check compatibility before ordering.
- Price is slightly higher than some generic blades, though the OEM peace of mind often justifies the cost.
- Not designed for heavy commercial use or thick brush that would require a mulching or high-lift aftermarket blade.
The Greenworks 2905203 is exactly what you want when it is time to replace the blade on your compatible 21-inch Greenworks mower. This is an OEM part, meaning it comes from the same factory that supplies blades with your original mower. If you have a Greenworks 80V, 60V, 40V, or 2x24V model that uses a 21-inch cutting deck, this blade is the most straightforward replacement option available.
This blade shines most for the suburban homeowner who mows an average lawn once a week. The cutting edge arrives sharp enough to slice cleanly through grass and even light weeds right out of the box. I have used these on a Greenworks 80V mower for two seasons, and the blade still cuts well with occasional sharpening. The steel feels sturdy it does not bend or chip easily if you accidentally hit a small rock or a root. Installation is simple: flip the mower on its side, remove the center bolt, swap blades, and tighten. No special tools required.
Build quality is typical of a well-made OEM blade. The center hole and mounting pattern match the mower spindle precisely, so you will not fight with alignment. The black coating resists rust better than plain steel, which is nice if you store your mower in a damp garage. One practical benefit of choosing OEM is the balance. Aftermarket blades sometimes come slightly off-balance, causing vibration that can loosen bolts or wear out bearings. This Greenworks blade spins true, keeping things smooth and quiet.
There is one realistic limitation: this blade only works if your mower uses the specific mounting pattern shown in the product images. Greenworks makes different blade patterns for different mower series, so you cannot assume all 21-inch blades fit. Check your mower model number against the long compatibility list in the description. Also, this is a standard lift blade, not a mulching or high-lift blade. If you bag clippings or need aggressive mulching, you might want a dedicated blade for that task. But for everyday cutting and side discharge, this blade does the job very well.
For the homeowner with a compatible Greenworks mower who just wants a reliable, drop-in replacement that restores factory cutting performance, the Greenworks 2905203 is an easy recommendation. It fits, it cuts, and it lasts. Keep one on hand so you are never stuck with a dull blade mid-season. If you own multiple compatible Greenworks mowers, buying a spare makes sense since the same blade fits across many models. Solid value, no fuss.
Color: Black
Size: 21 inch (2905203)
Dimensions: 20 x 1.5 x 2 inches
Weight: 1 pound
Product Group: Lawn and Patio
Binding: Lawn and Patio
80V Mowers: 2550702, 2550402, 2501202, 2500402, 1356602, 1356702, 1356402, 1356502, 2533902, 2541302, 2533402, 2533602, 2502202, 2506902, 2515902, 2534102, 2502402NV, 2533302, 2541202
60V Mowers: 2531702, 2531602, 2545102, 2531702T, 2531602T, 2535102T, 2504902T, 2509802
40V Mowers: 2515502, 1306402AZ, 2527302AZ, 2525202, 2516402, 1348402-HB, 2525102AZ, 2506502AZ, 2508502, 2506602, 2513502
2x24V Mowers: 2533202, 2532702, 2532502, 2532902
Always check your mowers mounting pattern against the product images before purchasing.
Pros
- Perfect fit for many Greenworks 21-inch mowers with straightforward installation.
- Delivers clean, consistent cuts right out of the box for most users.
- Sturdy heat-treated steel holds up well through multiple mowing seasons.
- Excellent value compared to sharpening or buying generic blades.
Cons
- May require a light touch-up sharpening out of the box for optimal cutting on some lawns.
- Only compatible with Greenworks mowers; verify mounting pattern before purchase.
- Limited to 21-inch cutting width; not suitable for other mower sizes.
The Greenworks Replacement Lawn Mower Blade (model 2992102VT) is a genuine OEM part designed specifically for 21-inch Greenworks mowers. If you own a Greenworks 40V, 60V, 80V, or 2x24V model from the extensive compatibility list, this blade is the go-to replacement that restores your mower's cutting performance to factory specifications.
This blade is best suited for homeowners, DIYers, and anyone who wants to keep their Greenworks mower running at its peak without messing with aftermarket parts. The heat-treated steel construction provides a solid balance of durability and edge retention, meaning you can expect a clean cut season after season. Multiple reviewers praised how easily it installed and how well it fit, some even noting it ran quieter than their worn original blade.
In real-world use, this blade cuts grass cleanly and evenly. Several customers mentioned it was sharp out of the box and performed like cutting butter. A few noted that a quick touch-up sharpening gave even better results, but that's typical for many replacement blades. The weight is light at 1.35 pounds, so it doesn't strain the mower motor or create excessive vibration. It's a straightforward swap -- just remove the old blade, match the mounting pattern (verify with the image), and you're back to mowing in minutes.
One limitation is that it's not a universal blade. You must ensure your mower uses the specific mounting pattern shown. This blade is exclusively for Greenworks mowers, so owners of other brands would need to look elsewhere. Also, a few users noted that while it's sharp, it might not be razor-sharp right out of the packaging -- but that's easily fixed with a file or sharpener.
Overall, this is a high-quality, affordable replacement that brings your Greenworks mower back to life. If your original blade is dull, nicked, or just overdue for a change, this genuine part is a solid investment. For the price, you get a durable, well-fitting blade that delivers the clean cut your lawn deserves.
Brand: Greenworks
Model: 2992102VT
Material: Stainless Steel (Heat Treated)
Color: Green
Cutting Width: 21 Inches
Product Dimensions: 20.08 x 1.97 x 0.67 inches
Weight: 1.35 pounds
Compatible Voltage: 40V, 60V, 80V, 2x24V
Assembly Required: Yes
UPC: 195526041566
Pros
- Precision-cut edge for a clean, professional-looking lawn.
- Strong steel build resists bending and wear over many seasons.
- Easy, tool-less installation on compatible Greenworks 25" mowers.
- Affordable way to refresh mower performance instead of replacing the whole machine.
Cons
- Only fits Greenworks 25-inch mowers not compatible with other brands or sizes.
- May require periodic sharpening to maintain peak cutting efficiency depending on lawn conditions.
- Packaging only includes the blade; no hardware or installation guide included.
The Greenworks 2952002 25-inch replacement blade is a straightforward, no-nonsense accessory for anyone using a Greenworks 25-inch walk-behind mower. This is a simple steel blade with a precision-ground edge, designed to restore cutting performance once your original blade dulls or gets nicked. It is not a power tool itself but a critical wear part that directly affects how cleanly and efficiently you cut your grass.
Who is this blade for? It's perfect for homeowners and DIY lawn care enthusiasts who already own a Greenworks mower and want to keep it running like new without spending on a whole new machine. If you mow a typical suburban lawn and prefer a crisp, even cut that helps your grass recover quickly, this blade delivers exactly that. Contractors or large-scale operators might want a more heavy-duty option, but for residential use, this blade hits the mark.
In real-world use, the sharp edge slices through grass cleanly, reducing torn leaf tips that can lead to browning. The steel is thick enough to handle occasional rocks or roots without immediately bending, though you will still want to avoid heavy impacts. Installation takes just a few minutes simply remove the old blade and bolt this one on. It works equally well for mulching or bagging, so you can switch between modes without swapping blades.
Build quality is solid for the price. The steel feels durable and resists rust better than some budget blades. At 1.12 pounds, it is light enough to handle easily but heavy enough to maintain momentum during mowing. The only real limitation is compatibility: it only fits Greenworks 25-inch models, so double-check your mower before ordering. Also, like any blade, it will eventually need sharpening or replacement after heavy use.
Overall, the Greenworks 2952002 is a reliable, cost-effective way to extend the life of your mower and keep your lawn looking its best. If you are a homeowner who values a clean cut and easy maintenance, this blade is a smart buy. Just make sure it fits your specific mower model, and you will be back to mowing with fresh cutting performance in no time.
Product Dimensions: 12 x 2.5 x 0.5 inches
Item Weight: 1.12 pounds
Manufacturer: Greenworks
ASIN: B0C2ZQ8VKR
Model Number: 2952002
Best Sellers Rank: #116,093 in Patio, Lawn & Garden #491 in Lawn Mower Blades
Pros
- Solid one-piece steel construction for durability and consistent cutting performance.
- Exact fit for several Greenworks 16-inch mower models, so no guesswork during installation.
- Lightweight at just over half a pound, making it easy to handle and swap out.
- Affordable replacement cost compared to buying a new mower just because the blade wore out.
Cons
- Only compatible with 16-inch mowers; not a universal blade for other sizes.
- Some users may find the blade requires periodic sharpening after heavy use on tough lawns.
- No additional accessories or hardware included, so you'll need to reuse existing bolts or purchase separately.
If you own a Greenworks 16-inch corded or cordless mower, the replacement blade under model 29512 is a straightforward upgrade that keeps your mower cutting like new. This blade is made from a single piece of alloy steel, which means there are no weak weld points that could fail over time. The forging process produces a rigid, durable edge that holds up well against grass, weeds, and even light debris. For homeowners who rely on their electric mower for weekly maintenance, this blade offers a clean, even cut without leaving ragged edges that can brown out.
The installation process is simple. You remove the old blade, line up the center hole, and bolt this one in place. The 15.75-inch length matches the factory specification, so your mower's cutting deck will operate at peak efficiency. Because it's designed specifically for Greenworks 16-inch models 25322 and 25242 (and many other 16-inch electric mowers), you won't have to worry about balance issues or poor fit. Just make sure you secure it with the proper torque and your mower will be ready to go.
In real-world use, this blade delivers consistent performance across different grass types and moisture levels. It does a good job mulching clippings and doesn't clog easily, thanks to its sturdy shape and sharpened edges. The one-piece steel construction also helps reduce vibration compared to blades with welded tips, which means less fatigue on your hands and arms during longer sessions. It's not the most aggressive blade on the market, but for a typical suburban lawn it's more than adequate.
Build quality is solid. The alloy steel resists bending if you hit a hidden rock or root, and the finish resists rust better than some cheaper alternatives. That said, like any mower blade, it will eventually need sharpening. If you mow frequently over tough grass or gravel, plan to touch it up with a file or grinder every few months. The lightweight design (just under 0.7 pounds) makes the blade easy to handle during maintenance, and it stores compactly in your workshop or garage.
One limitation is that it's not a universal blade. It only fits 16-inch mowers with the specific center hole pattern. Also, the package does not include new bolts or washers, so you'll need to reuse the original hardware or buy replacements if they're worn. For the price, this blade offers excellent value for DIY homeowners who want to extend the life of their Greenworks mower without spending on a new machine. It's a practical, reliable choice that gets the job done neatly.
Brand: Greenworks
Model: 29512
Fits: 16-inch electric mowers, including Greenworks 25322 and 25242
Blade Length: 15.75 inches (actual cutting width 16 inches)
Material: Alloy Steel, one-piece forged construction
Weight: 0.69 pounds
Dimensions: 15.75 x 1.97 x 0.71 inches
Compatible Power Sources: Corded Electric, Cordless Electric
Assembly Required: Yes (bolt to mower spindle)
This replacement blade is ideal for homeowners who maintain a small to medium-sized lawn with a Greenworks 16-inch electric mower. It's perfect for routine weekly mowing of Bermuda, fescue, or rye grass. Because it's designed for electric mowers, it pairs well with both corded and battery-powered units, making it a reliable backup or upgrade blade. If you want to keep your mower cutting cleanly without upgrading to a new machine, this blade is a smart, budget-friendly choice.
Pros
- Compatible with a range of Greenworks 42-inch zero turns and tractors.
- 2-in-1 functionality offers flexibility for different mowing conditions.
- Sturdy steel build should hold up to regular use.
- Mulching feature helps return nutrients to the soil.
Cons
- Only compatible with Greenworks brand mowers, limiting cross-brand use.
- Limited user reviews available to confirm long-term performance.
- May require careful installation to ensure proper balance.
This Greenworks replacement blade kit is a practical accessory for owners of 42-inch zero-turn mowers and lawn tractors from the same brand. Designed as a full set, it includes everything needed to swap out worn blades and restore cutting efficiency. The kit focuses on two common mowing needs: side discharge for quick grass removal and mulching for finer clippings that decompose naturally.
For homeowners and lawn care enthusiasts, this blade set offers a straightforward way to maintain their mower's performance. The dual-function design means you can choose the mode that suits your lawn's condition. Mulching is especially useful for those who prefer to leave clippings on the lawn to feed the grass, reducing the need for bagging and disposal. Suburban lawn owners with moderate-sized yards may find this approach convenient for regular maintenance.
Build quality appears solid, with blades made from high-grade steel that should resist bending and dulling over time. The optimized cutting geometry aims to deliver a cleaner slice through grass blades, which can help prevent ragged edges that invite disease. While the product description emphasizes durability, actual longevity will depend on mowing frequency, terrain, and debris encountered.
Installation is typically straightforward for anyone comfortable with basic mower maintenance. The kit includes all necessary blades, so you won't need to purchase extras separately. It's a good idea to check your mower's manual for torque specifications and proper alignment to ensure even cutting and avoid vibration. Regular blade inspection and replacement are key to keeping your lawn looking its best.
One limitation is that these blades are specifically designed for Greenworks equipment, so they won't fit other brands. Additionally, with zero reviews at the time of writing, there's limited user feedback to confirm real-world performance. However, based on the features and brand reputation, this kit appears to be a reliable option for those needing to refresh their mower's cutting ability. If you own a compatible Greenworks model and value the flexibility of mulching or side discharge, this replacement set is worth considering.
Pros
- Exact OEM fit for listed Greenworks mower models - no filing or adjustments needed
- Heat-treated steel offers good edge retention and resists warping over time
- Clearance design (blade shorter than deck) prevents accidental contact with deck edges
Cons
- Only compatible with specific Greenworks 20-inch models - double-check your mower's model number before buying
- May be slightly more expensive than generic blades, but the OEM guarantee justifies the cost for most users
If you own a Greenworks 20-inch electric mower, the B0B795RW1Q replacement blade is the straightforward way to get back to clean cuts. This is a genuine OEM part, which means it's built to the same specs as the blade that came with your mower. No guesswork, no aftermarket headaches. The blade is made from heat-treated steel, so it's designed to handle the occasional stick or thick patch without dulling quickly.
This blade is best suited for homeowners and DIYers who maintain their own lawn. It's not a high-performance racing blade for commercial landscapers, but for a typical residential yard it'll do the job. The 20-inch size (with the built-in clearance) matches the deck perfectly, and the simple bolt-on installation means you can swap it in under 10 minutes. The steel construction feels solid, and the cutting edge is sharp right out of the box.
In real-world use, this blade cuts grass cleanly without tearing, which promotes healthier turf. The heat treatment helps the edge stay sharper longer compared to untreated steel blades, so you won't need to sharpen it as often. The clearance design (about an inch shorter than the deck) is a smart safety feature that prevents the blade tip from hitting the mower housing. It also reduces vibration and keeps the mower running smoothly.
One realistic drawback is that this blade is model-specific, so you must verify your mower's model number before purchasing. The price is a bit higher than generic blades, but the perfect fit and OEM quality assurance make it worthwhile for most users. Also, since it's a standard blade, you won't get the mulching or bagging upgrades that some aftermarket blades offer.
Overall, if you need a direct replacement for your Greenworks 20-inch mower, this blade is a solid choice. It's reliable, easy to install, and restores your mower to factory performance. For homeowners who want a hassle-free swap and don't want to experiment with off-brand blades, this is the way to go.
Color: Black
Size: 20 inch (check your model)
Dimensions: 20.47 x 2.36 x 0.98 inches
Material: Heat-treated steel
Compatibility: Greenworks 20-inch mowers (MO48L4210, MO48L4212, MO48L4210-D, and ASINs B08XJNCCBT, B08XKDFYT1, B08XJWMYR5, B08XK1V1VB)
Product Group: Lawn and Patio
Common Questions About Greenworks Blades
How do I know which blade fits my mower?
Check your specific model number first. Greenworks lists compatible ASINs for each blade. Match the center hole shape and overall length to your deck. This ensures a secure fit on the spindle mount.
Can I sharpen a dull Greenworks blade?
Yes, you can sharpen most steel blades. Use a file or grinder to restore the edge. Keep the angle consistent. This extends the life of the blade and maintains a clean cut quality.
What is the difference between 16 and 21 inch blades?
The length and mounting pattern differ significantly. A 16-inch blade fits smaller push mowers. A 21-inch blade fits larger electric models. Never swap them. The wrong size causes vibration and poor cutting performance.
Do these blades work for mulching and bagging?
Most Greenworks blades are designed for general cutting. Some 42-inch kits offer dual functionality. Check the product description for specific mulching serrations. This helps you choose the right profile for your lawn care routine.
How do I install the new blade safely?
Always disconnect the battery or unplug the mower first. Use the correct bolt torque. Refer to the thread direction guide to avoid stripping the spindle threads during installation.


Write Your Review
No reviews yet. Be the first to share your experience!