Manual Lawn Mower Blades of 2026

The MaxPower 331528B is a replacement mulching blade designed for many 21-inch cut walk-behind mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. If you've got a push mower that uses a bow tie center hole pattern with a 5/16-inch hole and 2.5-inch spacing, this blade is likely a direct drop-in. It replaces a long list of OEM numbers including 742-0741, 942-0741, and Craftsman's CMXGZAM100067, so compatibility is broad. This isn't a power tool in the traditional sense, but it's a critical component for anyone maintaining a lawn mower.

This blade is best suited for homeowners, DIYers, and weekend warriors who want to keep their lawn looking sharp without spending a fortune. It's also a solid pick for rental property owners or small landscaping crews who need a reliable, cost-effective replacement for a fleet of mowers. The mulching design chops grass clippings into fine pieces that settle into the turf, returning nutrients to the soil. That means less bagging and a healthier lawn overall.

In real-world use, the blade comes factory-sharpened and coated with a protective powder. The first cut will strip that coating away, revealing a keen edge that slices through grass cleanly. Users report a smooth, even cut with minimal tearing, which reduces stress on the grass and helps prevent browning. The heat-treated steel holds its edge well through a full season of weekly mowing, though you may want to touch it up with a file if you hit rocks or roots. Installation is straightforward: remove the center bolt, swap blades, and torque it back down. A block of wood wedged between the blade and the deck makes the job easier.

Build quality is solid for an aftermarket blade. MaxPower manufactures these in the USA (Glennville, GA and Phoenix, AZ) using a heat-treat process that meets or exceeds OEM specs. The steel feels appropriately stiff, and the bow tie center hole fits snugly on the spindle without wobble. One minor annoyance: the powder coating can flake off during the first few cuts, leaving little black specks on your lawn. That's cosmetic and harmless, but worth noting. Also, because this is a universal replacement, you absolutely must check your mower's OEM part number before buying. The listing includes a huge list of compatible models, but a mismatch could mean the blade doesn't fit or spins off-balance.

Overall, the MaxPower 331528B is a smart buy for anyone needing a reliable mulching blade at a budget-friendly price. It cuts well, fits a wide range of mowers, and is built to last. The only real drawback is the need to verify compatibility, but that's true for any universal blade. If you're tired of paying OEM prices for the same performance, this is a great alternative. Just double-check your part number, and you'll be back to mowing in no time.

Blade Length: 21 inches

Blade Width: 2.25 inches

Center Hole: Bow tie pattern, 5/16-inch diameter outer holes, 2.5-inch center-to-center spacing

Weight: 1.6 pounds

Material: Heat-treated steel

Finish: Powder-coated (wears off on first use)

Manufacturer: MaxPower (USA-made in Glennville, GA and Phoenix, AZ)

Model Number: 331528B

Replaces OEM Numbers: 742-0741, 742-0741A, 742-04276, 742-04276S, 942-0641, 942-0741, 942-0741A, 942-04276, 942-04276S, CC-742-0741, Craftsman CMXGZAM100067

This blade fits many 21-inch cut mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. Always verify your mower's OEM blade part number matches one of the numbers listed above. Common compatible models include:

Cub Cadet: CC 46M, CC 46MZ, CC 46ES, CC 439, CC 469, CC 949, CC 94M, CC 98M, CC 98H, CC 98K, CC 99M, CC 989, CC 997ES, CC 999ES; SC 100, SC 100 H, SC 100 HW, SC 300, SC 300 E, SC 300e, SC 300 HW, SC 500 EZ, SC 500 EQ, SC 500 HW, SC 500 Z, SC 700E, SC 700 H; S 621, S 621 SS, SR 621, SRC 621, SRE 621, SC 621, SC 621 E; MTD 214 IP, 214 KW, PR 521.

Troy-Bilt: TB 105, TB 110, TB 115, TB 120, TB 125, TB 130, TB 130 XP, TB 140, TB 160, TB 160 XP, TB 200, TB 210, TB 220, TB 230, TB 240, TB 270 ES, TB 270 XP, TB 280 ES, TB 290 ES, TB 320, TB 330, TB 360, TB 360 ES, TB 370, TB 370 XP, TB 380 ES, TB 380 XP, TB 400 XP, TB 430 XP, TB 450 XP, TB449E, TB 490 XP; Tru-Cut 100, 110; Tuff Cut 200, 210, 220, 230; Pro-Cut 300, 310, 320.

Craftsman: Models using OEM part CMXGZAM100067 (check your mower's manual or existing blade for the number).

This Greenworks replacement lawn mower blade is purpose-built for the company's 19-inch corded and cordless electric mowers. It's not a universal blade - it's a direct OEM-style replacement for models like 2501302, 2500502, 25223, 25272, and 25292. If you own one of those mowers, this blade bolts right on with no filing or drilling.

Who should buy this? Homeowners who rely on a Greenworks 19-inch mower for their lawn care. Whether you're using the corded version for a small yard or the cordless for a medium lot, this blade keeps your mower cutting cleanly. It's a straightforward swap that restores cutting performance when the original gets dull or damaged.

Performance-wise, the blade is forged from a single piece of alloy steel, which gives it good rigidity and longevity. The grind on the cutting edge is sharp right out of the box and provides a clean slice through grass, reducing tearing and promoting healthier turf. The 17.72-inch actual length matches the mower deck precisely, so you get full cutting width without leaving uncut strips.

Build quality is solid for the price. The steel won't bend easily under normal use, and the black finish offers some corrosion resistance though it's not a coated blade. At 16 ounces, it's light enough to handle without strain during installation. You'll need a socket or wrench to remove the center bolt, but the process is simple and well within reach of a DIY homeowner.

One realistic drawback is compatibility - it only works on Greenworks 19-inch models, so no mixing with other brands. Also, being bare steel, it will rust if you leave it wet after mowing. Rinsing and drying before storage takes a minute but extends blade life. Overall, this is a reliable, affordable replacement that keeps your Greenworks mower running efficiently season after season.

Brand: Greenworks
Model Number: 29373
Blade Length: 17.72 inches
Cutting Width (Mower): 19 inches
Material: Alloy Steel
Weight: 16 ounces
Compatible Mower Models: 2501302, 2500502, 25223, 25272, 25292
Power Source: Corded Electric / Cordless (depends on mower)
Assembly Required: Yes (bolt-on installation)
Color: Black

The American Lawn Mower Co. SK-2 Reel Lawn Mower Hand Sharpener is a purpose-built tool for anyone who uses a reel push mower. If you own a manual reel mower from brands like Great States, American Lawn Mower, Scotts, or Earthwise, this sharpener is designed to keep your blades cutting cleanly season after season. It is a handheld kit that sharpens both the spinning reel blades and the stationary bed knife, restoring the scissor-like action that gives a precise cut.

This sharpener is best suited for homeowners with small to medium lawns who prefer the quiet, eco-friendly operation of a reel mower. It is also a smart buy for DIYers who want to handle their own mower maintenance without spending money on professional sharpening. The kit includes two sharpening stones, one for the reel blades and one for the bed knife, plus a small brush for applying the included grinding compound. The process is straightforward: you apply the compound, then run the appropriate stone back and forth along the blade surface. It takes some time and a bit of patience, but the results are noticeable. Users report that after sharpening, their mower cuts more cleanly and requires less effort to push through grass.

Build quality is solid for the price. The plastic housing is lightweight but feels durable enough for occasional seasonal use. The sharpening stones are coarse enough to remove dull edges without being overly aggressive. At just 1.72 ounces, the entire kit is easy to toss in a tool bag or store on a shelf. One thing to keep in mind is that this is a manual tool. It requires physical effort to get a good edge, especially if your blades are very dull or have never been sharpened. Some users have found it helpful to use a drill with a socket attachment to speed up the process, but that is not included and requires some improvisation.

A realistic drawback is that this sharpener only works on reel mowers. If you also own a rotary or power mower, you will need a different sharpening system. Also, the instructions could be clearer regarding disassembly steps, particularly when removing the wheel clip. A few users mention that the included directions are basic, but with a little common sense and the tips found in online reviews, most people can get the job done. Overall, this is a practical, low-cost maintenance tool that extends the life of your reel mower and improves your lawn cutting experience.

If you want to keep your reel mower performing at its best without spending a lot of money, the American Lawn Mower Co. SK-2 is a solid choice. It is not a power tool, but it is a valuable workshop accessory for anyone who values a sharp, even cut from a manual mower. For the price, it delivers real value and is a worthwhile addition to any homeowner's tool collection.

The American Lawn Mower Company 1204-14 is a classic push reel mower that brings back the simplicity of manual lawn care. Unlike gas or electric mowers, this tool relies entirely on your own muscle power to spin the reel and cut grass. It's a straightforward, no-nonsense machine designed for homeowners who prioritize quiet operation, zero emissions, and low maintenance over speed and brute force.

This mower is best suited for small, flat lawns with cool-season grasses like bluegrass, fescue, and rye. It's ideal for DIY homeowners who enjoy a bit of exercise while taking care of their yard. If you have a quarter acre or less and don't mind mowing more frequently during the growing season, this reel mower can deliver a clean, precise cut that actually promotes a healthier lawn by slicing rather than shredding the grass blades.

In real-world use, the 1204-14 performs best when you stay on top of your mowing schedule. It handles grass up to 4 inches tall, but for the best results, you should mow when the grass is dry and no more than about 3 inches high. The adjustable cutting height ranges from 0.5 to 1.75 inches, giving you good control over lawn appearance. The 8.5-inch polymer wheels roll smoothly on flat ground, but the mower can struggle on uneven or bumpy terrain. You'll need to make multiple passes if the grass is on the taller side, and wet grass will clog the reel and leave an uneven cut.

Build quality is decent for the price point. The frame is made of steel, and the reel blades are heat-treated alloy steel that stay sharp for years with minimal care. Assembly is straightforward and can be done in about 15 minutes with basic tools. The cushioned T-handle is comfortable for most users, though taller individuals might find it a bit low. At just 19 pounds, the mower is easy to lift and store, and it takes up very little space in a garage or shed.

One realistic drawback is that this mower won't replace a gas or electric model for larger or more demanding lawns. If you have a half-acre or more, or if your yard has hills, you'll likely find the manual effort tiring and time-consuming. Also, the 14-inch cutting width means more passes compared to a 21-inch power mower. But for its intended use - small, flat lawns - the American Lawn Mower 1204-14 is a reliable, eco-friendly, and cost-effective choice that gets the job done without noise, fumes, or ongoing fuel costs.

The American Lawn Mower Company 1304-14 is a 14-inch 5-blade push reel mower that brings back the simplicity of manual lawn care. Unlike gas or electric mowers, this reel mower uses your own pushing power to spin the blade reel against a stationary bed knife, producing a clean scissor-like cut. It is designed for homeowners with small to medium flat lawns who want an eco-friendly, quiet, and low-maintenance alternative to powered mowers.

Real-world performance is surprisingly good for a manual mower. It cuts grass up to 4 inches tall in a single pass, but it really shines when you mow regularly (every 4-7 days). The five-blade reel and 14-inch cutting width handle typical residential lawns efficiently. You need to walk at a steady pace to keep the blades spinning fast, and overlapping passes by about a third ensures no missed grass. The cut quality is excellent - it trims grass blades cleanly instead of shredding them, which leads to a healthier, greener lawn over time.

Build quality is solid for the price point. The heat-treated alloy steel reel and bed knife are durable and stay sharp for years. The 10-inch composite wheels with rubber tires roll smoothly over most lawns and make maneuvering easy. Assembly takes about 10 minutes with just the handle to attach. The T-style handle is comfortable with a foam grip, and the mower is light enough to lift or store in a small garage space.

There are some realistic drawbacks. This mower works best on flat lawns - uneven ground or thick weeds can cause the reel to jam or skip. It also struggles with wet grass or very tall grass (over 4 inches). You will need to pick up twigs and stones beforehand, and mowing more frequently is required to maintain a tidy look. The clippings are left on the lawn (good as natural mulch), but they can get on your legs if you wear shorts.

Overall, the American Lawn Mower 1304-14 is an excellent choice for homeowners who want a quiet, eco-friendly, and low-maintenance mower for a small flat lawn. It gives you a good workout, saves money on fuel and repairs, and produces a cut that many turf experts prefer. If you have a larger or more challenging lawn, consider the 16-inch or 18-inch models from the same brand.

The American Lawn Mower Company 1304-14GC is a manual push reel mower that brings back the simplicity of lawn care without the hassle of gas, cords, or batteries. This 14-inch 5-blade model is designed for homeowners with small, flat lawns who want a quiet, eco-friendly alternative to traditional power mowers. It's especially appealing to those who enjoy a hands-on approach and want to reduce their carbon footprint.

In real-world use, this mower delivers a precise scissor-like cut that's healthier for grass than the tearing action of rotary blades. It handles grass up to 2.25 inches tall with ease, leaving a clean, manicured appearance. The 5-blade reel provides a fine cut, but you'll need to mow frequently to avoid overgrowth. For small yards under a quarter acre, it's perfectly adequate, though larger areas will demand more time and physical effort.

Build quality is solid for a manual mower. The heat-treated alloy steel blades stay sharp for years, and the polymer wheels are durable and roll smoothly. Assembly is tool-free and takes just minutes. At 18 pounds, it's easy to push and lift, and the T-style handle with cushioned grip reduces fatigue. The included grass catcher is convenient but can fill up quickly on longer grass.

The main drawback is its limitation on grass height and terrain. It struggles with thick, wet, or uneven grass, and it won't work on slopes or bumpy ground. It also requires more physical exertion than a powered mower, so it's not ideal for those with mobility issues or very large lawns. But for the right user, it's a reliable, low-maintenance tool that saves money on fuel and repairs.

Overall, the American Lawn Mower Company 1304-14GC is a smart choice for eco-conscious homeowners with small, level lawns. It's quiet, easy to use, and built to last. If you're looking for a simple, sustainable way to keep your lawn neat without the noise and fumes, this reel mower delivers solid value.

Brand: American Lawn Mower Company

Model: 1304-14GC

Cutting Width: 14 inches

Blades: 5

Cutting Height: 1 to 2.25 inches (adjustable)

Wheel Size: 10 inches

Weight: 18 pounds

Handle Style: T-style with cushioned grip

Grass Catcher: Included

Material: Alloy steel blades, polymer wheels, plastic body

Assembly: Tool-free

Recommended Grass Length: Up to 2.25 inches

Color: Mint

This reel mower is best for small, flat lawns under a quarter acre. It's ideal for homeowners who want a quiet, emission-free mowing experience. Great for early morning or evening use without disturbing neighbors. Also suitable for teens learning lawn care or seniors who prefer a lightweight, easy-to-maneuver tool. Not recommended for large properties, thick grass, or uneven terrain.

The mower comes with a grass catcher that attaches to the rear, making cleanup easy. Assembly is tool-free and includes all necessary parts. No additional accessories are required for operation.

The LawnMaster LMRM1401 is a classic push reel mower designed for homeowners who want a simple, eco-friendly way to keep a small lawn tidy. It features a 14-inch cutting width with 5 hardened steel blades that spin as you push, creating a scissor-like cut that snips grass cleanly instead of tearing it like a rotary mower. This type of cut is actually better for grass health because it reduces stress and helps the lawn stay greener with less browning at the tips.

This mower is best suited for people with small, relatively flat yards under a quarter acre. It's a great fit for homeowners who enjoy a bit of light exercise while doing yard work and who want to avoid the noise, fumes, and maintenance of gas or cordless mowers. Contractors or landscapers won't find it practical for daily commercial use, but for a residential touch-up or a small city lot, it gets the job done without any hassle.

In real-world use, the LMRM1401 is easy to push on level ground, and the 10-inch front wheels help it turn smoothly around obstacles. The cutting height adjusts between 1 and 2 inches via a simple lever, giving you four positions to choose from depending on the season or grass type. One thing to note: this mower doesn't have a grass catcher, so you'll either need to rake up the clippings or leave them as mulch. That's fine for many homeowners, but if you prefer a bagged finish, you might want to look at the larger 18-inch model with a collection bag.

Build quality is decent for the price. The deck is plastic, which keeps the weight down to about 25 pounds, but it won't be as tough as a steel deck if you accidentally hit a rock or root. The blades are hardened steel and should hold an edge for a few seasons with occasional sharpening. There's no assembly required, which is a nice touch you just unfold it and start mowing. Storage is easy too, because it folds flat enough to hang on a wall or tuck into a corner of the garage.

The main limitation is that this mower requires physical effort. On thick, tall, or wet grass, you'll have to push harder, and it won't handle slopes or uneven ground as well as a powered mower. If your yard is hilly or larger than a quarter acre, you'd be better off with a cordless electric model. But for a small, flat lawn where you want a quiet, zero-emission mowing experience that costs nothing to run, the LawnMaster LMRM1401 is a solid choice that delivers a clean cut without any fuss.

Brand: LawnMaster

Model: LMRM1401

Type: Push Reel Mower

Cutting Width: 14 inches

Number of Blades: 5 (hardened steel)

Cutting Height: 1 to 2 inches (4 positions)

Weight: 24.9 pounds

Dimensions: 21.96 x 10.3 x 15 inches

Power Source: Manual (no gas or batteries)

Material: Plastic deck with steel blades

Color: Orange

Assembly Required: No

This manual reel mower is perfect for small, flat residential lawns up to about 1/4 acre. It's an excellent choice for homeowners who want an environmentally friendly mowing option with zero emissions and minimal noise. Use it for regular weekly trims to keep grass at a manageable height, and avoid letting the lawn get too tall or overgrown, which makes pushing harder. It also works well for trimming around gardens, flower beds, and tight spaces where a larger mower can't reach. If you enjoy a bit of light exercise while doing yard chores, this mower gives you a good workout without the hassle of cords or fuel.

The LawnMaster LMRM1801 is a manual push reel mower designed for homeowners who want a quiet, eco-friendly way to maintain a small, flat lawn. Unlike gas or electric mowers, this 18-inch model uses no fuel, batteries, or cords - just your own pushing power. It features five hardened steel blades that spin against a stationary bed knife, creating a scissor-like cut that slices grass cleanly rather than tearing it. This results in a healthier lawn with less browning at the tips.

Who is this mower for? It's best suited for DIY homeowners with small to medium-sized, level yards - think city lots, suburban front lawns, or weekend properties. It's also a solid choice for eco-conscious users who want to reduce emissions and noise. Contractors or landscapers with larger or sloped properties should look elsewhere, as this mower really shines only on flat, well-maintained grass. The 9-position height adjustment (1.1 to 2.5 inches) lets you customize the cut for different grass types and seasons.

In real-world use, the LMRM1801 delivers a clean, even cut when the grass is dry and not too tall. Reviewers note that it handles crabgrass and weeds without issue, but thick, wet, or overgrown grass can bog it down - you may need to go over the area twice or use a string trimmer first. The 18-inch cutting width is efficient for small lawns, and the 10-inch front wheels provide decent maneuverability around obstacles. The included 35-liter collection bag works well for catching clippings, or you can let them fall as mulch.

Build quality is decent for the price. The deck is plastic to keep weight down (33 pounds), and the blades are hardened steel. Assembly is tool-free and takes just a few minutes. Maintenance involves wiping the blades dry after each use and applying a light oil (like WD-40) to prevent rust. The manual also recommends greasing the gears periodically. Some users mention that the wheels are a hard plastic rather than rubber, which can be less grippy on damp grass, but overall traction is fine on dry turf.

Drawbacks? As noted, this mower is not for hills, thick grass, or large yards. It can also leave uncut strips near edges because the blades sit a few inches inside the wheels - you'll need a trimmer for borders. And while it's a good workout, it's not as effortless as a self-propelled gas mower. That said, for the right user - someone with a small, flat lawn who values quiet, clean cutting and zero emissions - the LawnMaster LMRM1801 is an excellent, affordable choice. It's easy to store, simple to maintain, and delivers a healthier lawn with every push.

Brand: LawnMaster
Model: LMRM1801
Cutting Width: 18 inches
Number of Blades: 5 hardened steel
Cutting Height Range: 1.1 - 2.5 inches (9 positions)
Power Source: Manual (push)
Deck Material: Plastic
Wheel Size: 10 inches (front)
Collection Bag Capacity: 35 liters
Weight: 33 pounds
Product Dimensions: 24.6 x 10.62 x 18.11 inches
Assembly Required: No (tool-free handle snap-on)

Best for: Homeowners with small, flat lawns (up to about 1/4 acre) who want a quiet, eco-friendly, and low-maintenance mowing solution. Ideal for those who enjoy a light workout while doing yard work.

Not recommended for: Large yards, steep slopes, thick or wet grass, or users who need a self-propelled mower. If your lawn is overgrown or has many obstacles, consider a gas or electric mower instead.

Maintenance tips: Clean blades after each use to prevent rust. Apply WD-40 or similar light oil to blades and gears. Store in a dry place. Check blade alignment if the mower becomes hard to push or stops cutting evenly.

What's included: Mower body with wheels, handle assembly, collection bag, and user manual. No tools needed for setup.