Craftsman Replacement Lawn Mower Wheels of 2026

The GICOOL 8-inch front mower wheel is a basic but essential replacement part for anyone maintaining an older Craftsman or Husqvarna lawn tractor. It's not a fancy performance upgrade; it's a drop-in tire that gets your mower rolling again when the original has cracked, dry-rotted, or worn smooth. The dimensions are standard: 8 inches tall, 1.75 inches wide, with a 1/2-inch bore that fits the front spindles on a huge range of models. That compatibility list includes dozens of Craftsman 917-series tractors, plus several Husqvarna and HU variants, so there's a good chance it's the right wheel for your machine.

This wheel is best suited for homeowners who do their own basic mower maintenance. If you've got a Craftsman LT2000, DYT4000, or similar rider from the 2000s, this is likely the exact front wheel you need. Contractors or landscapers with a fleet of mowers might also keep a couple on hand for quick swaps, but the real value is for the DIY guy who just wants to finish mowing without wrestling with a flat tire. Installation is straightforward: jack up the front, remove the cotter pin and washer, pull the old wheel, and slide on the new one. No special tools needed, and the wheel fits snugly without play.

In real-world use, the GICOOL wheel rolls smoothly on grass, dirt, and light gravel. The rubber tread provides decent grip for steering, though it's not aggressive enough for loose soil or steep slopes. It won't damage your lawn like a hard plastic wheel might, and the white color holds up well against UV exposure. Build quality is about what you'd expect for a budget replacement: the rubber is firm but not brittle, and the hub is reinforced around the bore to prevent cracking from the spindle. Some users might wish for a sealed bearing instead of running straight on the spindle, but that's how most OEM wheels are designed, so it's not a flaw.

The main limitation is compatibility. The wheel fits the listed models, but if you have a different brand or a newer Craftsman with a 3/4-inch spindle, you'll need to measure first. Also, because there's no built-in bearing, the wheel relies on your mower's spindle being smooth and lubricated. If your spindle is rusty or worn, you might get wobble or vibration. That's a maintenance issue, not a wheel problem, but worth noting. Another minor point: the tire is a solid rubber, not pneumatic, so it won't give you cushioning over bumps. That's fine for a front wheel where weight is lighter, but don't expect a smooth ride on rough terrain.

Overall, the GICOOL 8-inch front mower wheel is a solid, affordable fix for a common problem. If your Craftsman or Husqvarna mower's front tires are shot, this is the part you want. It's not loaded with features, but it does what it's supposed to do: fit, roll, and last through a season or two of regular mowing. I'd recommend buying a pair so both front wheels match, and you'll save yourself the hassle of hunting down a second one later. For the price, it's a no-brainer for anyone keeping a older mower in service.

This 2-pack of 8-inch lawn mower wheel assemblies from CLSR2U is a direct replacement for the MTD / Cub Cadet 634-05040 part number, designed to fit a wide range of self-propelled walk-behind mowers from Craftsman, Cub Cadet, Brute, Columbia, Yard Man, and MTD Gold. If your mower's front drive wheels are worn, cracked, or just not gripping the lawn like they used to, this set offers a cost-effective way to restore performance without buying a new machine.

Best suited for homeowners and DIYers who maintain their own lawn equipment, these wheels are a practical upgrade for anyone with a compatible 21-inch mower or 24-inch chipper shredder. The installation is straightforward: pry off the wheel cover with a flathead screwdriver, loosen the mounting nut with a 9/16-inch socket, swap the old wheel for the new one, and snap the cover back on. It's a job that takes about 10 minutes per wheel, and you don't need any specialized tools.

In real-world use, these wheels roll smoothly over grass, dirt, and uneven terrain. The 8-inch diameter provides good clearance and helps the mower maintain traction when self-propelling. The plastic construction feels durable enough for regular residential use, though it's not designed for heavy commercial abuse. The wheel assembly includes the tire and hub, so you're getting a complete drop-in replacement.

One thing to note: compatibility is key. These wheels are listed for specific models like the Craftsman M210, M215, M230, and Cub Cadet SC 300 series, among others. Always double-check your original part number (634-05040) before purchasing. The plastic wheel cover can be a bit tight; using a flathead screwdriver carefully helps avoid cracking it. That's a minor quibble, though.

Overall, if you're a homeowner looking to keep your walk-behind mower running smoothly without spending a fortune, this CLSR2U two-pack is a solid buy. It's a straightforward DIY fix that gets your mower back to cutting without the hassle of a full service center visit.

Size: 8 inches diameter

Weight: 3.27 pounds per set (2 wheels)

Product Group: Tires

Replacement Part Number: MTD / Cub Cadet 634-05040

Package Includes: 2 x Wheel Assembly

Compatible with Craftsman M210 (2019), M215 (2019), M230 (2019), 247.374410, 247.377440

Compatible with Cub Cadet SC 300 HW, SC 300, SC 300 IP, SC 300 E, SC 700

Compatible with Brute 12A-A06M078, 12A-A06N778, 12A-A0A9778

Also fits Columbia, Yard Man, Black Max, MTD Gold, and other models with MTD 634-05040 part number

If you have a self-propelled Craftsman, Husqvarna, or HU mower that has lost its pulling power, the GICOOL front drive wheels are a practical replacement to get you back in action. These 8-inch wheels come as a pair and are engineered to match multiple OEM part numbers, making them a direct fit for a huge range of models. Whether your old wheels are cracked, worn smooth, or just slipping, swapping them out with these GICOOL wheels can restore proper traction and self-propulsion.

These wheels are best suited for homeowners and DIYers who do occasional to moderate mowing. The hard plastic construction is durable enough for typical residential lawns, resisting the aging and heat that comes from sun exposure and friction. The 53 gear teeth on the drive hub engage positively with the mower drive system, so you get steady forward movement without jerking or stalling on hills.

Installation is about as easy as it gets. You don't need special tools or mechanical skills. Just remove the old wheel, slide the new one onto the axle, and secure it. Most people can swap both wheels in under ten minutes. That said, if your axle has any play or rust, the 1/2-inch bore might fit slightly loose. But for the vast majority of mowers in decent condition, the fit is snug and secure.

Build quality is adequate for the price. These are not heavy-duty commercial grade wheels. They are made of hard plastic, which is lighter than metal or reinforced composite. Over time, the tread may wear down faster if you mow over very rough terrain or rocky soil. For typical suburban lawns, they should hold up for a full season or two before showing signs of wear. Consider these a cost-effective replacement rather than a once-in-a-lifetime upgrade.

Overall, if you need to fix a finicky self-propelled mower without spending a lot, these GICOOL front drive wheels are a solid choice. They offer broad compatibility, simple installation, and dependable performance for light to moderate use. Just check your mower model against the compatibility list to be sure they fit. For the DIY homeowner who wants a quick fix, these wheels get the job done.

Wheel Size: 8 inches diameter

Rim Width: 1.75 inches

Bore Size: 1/2 inch

Drive Gear Teeth: 53

Material: Hard plastic

Color: Gray

Weight (pair): 2.73 pounds

Compatible Brands: Craftsman, Husqvarna, HU self-propelled mowers (see full list in description)

Replaces OEM Part Numbers: 583719501, 532402657, 194231X460, 532402567, 401274X460, 194231X427, 532403111, 181469, 180658

These front drive wheels are ideal for residential lawn mowers that have lost their self-propulsion due to worn or damaged front wheels. They are a perfect replacement for homeowners who want to extend the life of their Craftsman, Husqvarna, or HU mower without buying a new machine. Use them on flat to moderately sloped lawns where reliable traction is needed for even cuts.

While not designed for heavy commercial mowing, they work well for weekly trimming of medium-sized yards. If you have a bumpy or rocky property, consider pairing these with a more aggressive rear tire setup to avoid excessive wear on the front wheels.

If you own a Craftsman, Husqvarna, Poulan, or similar front-wheel-drive self-propelled mower, the Grasscape 2-pack front wheels are a practical, budget-friendly replacement option. These 8-inch wheels are designed to directly swap with worn originals, restoring traction and drive performance without the hassle of tracking down OEM parts.

Each wheel features a 53-tooth drive gear made from a combination of metal and high-density rubber. This gives you solid bite on grass, helping the mower pull itself forward even on slightly damp or uneven turf. For the average homeowner mowing a quarter-acre lot once a week, these wheels will handle the job reliably. The rubber tread provides decent grip, and the metal core adds rigidity to prevent flex under load.

Installation is straightforward: remove the old wheel, slide this one on, and secure it with the existing hardware. Most users can finish the swap in under 10 minutes. At 8 inches in diameter and 1-3/4 inches wide, the wheels roll smoothly over bumps and reduce the chance of scalping. The 1/2-inch bore fits standard axles on compatible models.

That said, these aren't heavy-duty commercial wheels. If you mow over rocky soil, thick roots, or frequently bump into curbs, the plastic gear teeth can wear or chip faster than all-metal alternatives. A little preventive care, like avoiding sudden engagement when the wheels are stuck, goes a long way. Also, some users find that applying a dab of grease to the axle helps the wheel spin freely and reduces noise.

Overall, the Grasscape front wheels offer excellent value for DIY homeowners and weekend lawn warriors. They restore proper drive function to your mower without breaking the bank. Just double-check your mower's model number against the compatibility list to ensure a perfect fit. For the price and performance, they're a smart choice for keeping your self-propelled mower running smoothly season after season.

Wheel Size: 8 inches diameter

Width: 1-3/4 inches

Bore: 1/2 inch

Hub: 1-5/8 inches

Number of Teeth: 53

Material: High-density plastic and rubber with metal gear core

Package Includes: 2 front drive wheels

Compatible Models: Craftsman 917.370431, 917.370441, 917.370601, 917.370692, 917.370430, 917.370432, 917.370640, and many Husqvarna, Poulan, Poulan Pro, Roper, Sears, and Weedeater front-wheel-drive mowers

Replaces OEM Part Numbers: 583719501, 532402657, 194231X460, 532402567, 401274X460, 194231X427, 532403111

Weight (pair): 1.28 kg (2.82 lbs)

Warranty: 1 year

If you've ever wrestled with a flat front tire on your riding mower, you know the hassle of dismounting the old rubber, wrestling with a tire machine, or hunting for a shop that can do it. The CMOOD 15x6.00-6 Lawn Mower Tire and Wheel Set skips all that nonsense by delivering a fully assembled, air-filled unit that clips right onto your mower's axle. No tubes to install, no rims to match - just pull the old tire off, slide the new one on, and replace the retaining clip. It's a genuine time-saver for anyone who does their own outdoor equipment maintenance.

These tires are built with a 4-ply natural rubber carcass and a multi-trace tread pattern. In practice, that translates to decent grip on grass, light soil, and even damp surfaces. The tread also helps absorb some vibration, so the front end of your mower feels a bit smoother over bumpy lawns. However, a handful of owners have noted that the rubber can wear through faster than expected - some report seeing the canvas layer after only three or four mowing sessions. This suggests the compound might be on the softer side, which trades long-term durability for initial traction and comfort. For the price, it's a balanced trade-off for light residential use.

Installation is where this set really shines. The 3/4 inch sintered iron bushings fit standard front axles on most John Deere, Craftsman, Husqvarna, and similar lawn tractors. Reviewers consistently mention how easy it is to swap these out with basic hand tools, often completing both wheels in under 15 minutes. That's a big deal when you'd rather be mowing than wrenching. Just keep in mind that the tires run a bit narrower than some factory originals - about 5.3 inches of section width versus the 6 inches stated - so they may look slightly skinny. It doesn't affect performance on level ground, but on steep slopes you might notice a bit less lateral stability.

Build quality feels solid for the price point. The rims are metallic with a black finish, and the tire itself has a firm sidewall that holds shape well under load. Each tire can handle up to 570 pounds, which is more than enough for the front of a residential riding mower even with a front-mounted accessory. The maximum recommended inflation is 30 PSI, but many users find that 20-25 PSI gives the best ride comfort on turf without bouncing. If you're running a heavy zero-turn or a commercial mower, you might want something with a higher ply rating, but for the average homeowner this is perfectly adequate.

So who should buy the CMOOD 15x6.00-6 set? If you have an older Craftsman, John Deere, or Husqvarna mower with a flat front tire and you want to get it back in service quickly without breaking the bank, this is a solid choice. It's also a great backup set to keep on hand for emergencies. But if you mow a large, rough property or need maximum durability for daily commercial use, you might want to invest in a heavier-duty tire. For the typical homeowner who mows once a week during the season, these tires offer a practical, easy-to-install solution that gets the job done without fuss.

Overall Tire Size: 15x6.00-6

Tire Diameter: 15 inches

Tire Width: 6 inches (actual section width approx. 5.3 inches)

Rim Diameter: 6 inches

Bushing Size: 3/4 inch sintered iron

Load Capacity: 570 lbs (258 kg) per tire

Maximum PSI: 30

Ply Rating: 4 ply

Tread Depth: 0.75 inches

Item Weight: approx. 16.01 pounds (set of 2)

Material: Natural rubber with metal rim

Color: Black tire, silver/metallic rim

Model: Lawn Mower Tires

UPC: 760701615117

These 15x6.00-6 tires are designed to replace front tires on a wide variety of riding mowers and lawn tractors. They fit models from John Deere, Craftsman, Husqvarna, MTD, Murray, Yard Machines, and many others that use the same size. The 3/4 inch sintered iron bushing is a common fitment on older and newer mowers alike. Before ordering, always measure your existing tire's overall diameter (approx. 14.2 inches) and section width (approx. 5.3 inches) to ensure a match. These tires are not suitable for highway use or for vehicles over 260 kg (570 lb).

You receive a set of two pre-assembled tire and wheel units. Each tire comes mounted on its rim, inflated, and ready to install. No tubes, no loose rim halves - just take them out, remove the old tires, and slide these on. The package does not include the axle clips or cotter pins, so reuse the ones from your old tires.

The Antanker 14 Inch Lawn Mower Wheels Replacement 2 Pack is a practical upgrade for anyone maintaining a push mower, garden cart, or small trailer. These wheels are built from a durable PP plastic that balances weight and wear resistance, making them a solid choice for homeowners and DIYers who need reliable rolling performance without breaking the bank.

In real-world use, the deep-tread pattern on these wheels really shines. The rubber-like PP surface provides excellent traction on slopes, wet grass, and uneven soil. If you've ever fought a mower that slips or slides when the ground gets tricky, these wheels will help you keep a steady, even cut. They also roll smoothly on hard surfaces, which is a nice bonus for cart and trailer applications.

Installation is straightforward. The kit comes with two wheels, two heavy-duty mounting bolts, two locking nuts, and several washers. You won't need to hunt down extra hardware or make special trips to the store. Just swap out your old wheels and you're back in action. The 1/2-inch spoke hole diameter fits most standard axles, but it's always a good idea to double-check your equipment's specs before ordering.

Build quality is decent for the price point. The plastic construction keeps weight down, which helps with maneuverability, but it may not be as impact-resistant as steel or solid rubber wheels. If you frequently roll over sharp rocks or rough terrain, you might want to inspect the wheels periodically for cracks. That said, for typical lawn care and light hauling, these wheels hold up well.

Overall, the Antanker 14 Inch Lawn Mower Wheels are a smart buy for anyone looking to refresh worn-out wheels on a push mower, garden cart, wheelbarrow, or trailer. They offer good traction, easy installation, and solid durability for the money. If you're a homeowner or DIYer tackling yard work and garden projects, these wheels will serve you well.