A Honda lawn mower spark plug replacement is a straightforward maintenance task that typically takes less than an hour to complete. The key to a successful swap is identifying the correct plug heat range and verifying the gap before installation. This process ensures your engine runs smoothly and prevents common starting issues. Understanding the how to change honda lawn mower spark plug procedure helps you maintain your equipment without professional assistance.
Many homeowners prefer handling this task themselves because it is cost-effective and accessible. You do not need extensive mechanical knowledge, just the right tools and a clear understanding of the steps. The correct spark plug ensures efficient combustion, which is vital for the longevity of your small engine. If you are also looking at other maintenance items, our mower blade guide can help you keep your cutting system in top shape.
Pros
- Exact OEM fit guarantees no guesswork or adaptation needed
- Highly reliable starting and smooth engine performance
- Affordable price for genuine manufacturer part
- Long lifespan under normal use conditions
Cons
- Compatibility limited to specific Honda GCV engine models only
- May require gap verification before installation on some units
- Not a performance upgrade; purely a stock replacement plug
The Honda 98079-56846 (BPR6ES) spark plug is a genuine OEM replacement designed specifically for Honda GCV160 and GCV190 general purpose engines. These engines power a wide range of outdoor equipment, from push mowers and tillers to pressure washers and generators. If you own any Honda-powered gear in this engine family, this plug is the exact component the manufacturer intended.
This spark plug is best suited for homeowners who want to keep their equipment running reliably without costly trips to the repair shop. Replacing a worn or fouled plug solves common problems like hard starting, rough idling, and intermittent misfires. Experienced DIY users will appreciate the straightforward install: just remove the old plug, gap the new one if needed (typically pre-gapped), and tighten with a socket. No special tools are required.
In real-world use, this plug delivers instant ignition and consistent combustion. Users report that it cures long-standing starting issues and smooths out engine operation almost immediately. The OEM construction includes a nickel-alloy center electrode that resists carbon buildup and thermal degradation, so it holds up well across multiple seasons of regular mowing or tilling. The threaded shell and gasket seal tightly to prevent compression leaks, which helps maintain full engine power.
Build quality is typical of Honda parts: precise manufacturing, clean threads, and a solid crimp on the terminal. The plug itself is lightweight and compact, making it easy to store in a toolbox or glove compartment as a spare. While it does not offer any performance gain over a standard plug, that is exactly the point - it maintains the factory spec for reliable operation in everyday conditions.
One realistic limitation is that this plug only fits the specific engine models listed. If you have a different Honda engine (e.g., GXV, GC, or GX series), you will need to check cross-reference numbers. Additionally, some units may require a small gap adjustment before installation, as transit can occasionally shift the gap. Overall, for anyone maintaining a Honda GCV-powered mower or tiller, this genuine spark plug is a straightforward, inexpensive fix that restores performance and extends equipment life. It is a smart stock-up item for the workshop bench.
Brand: Honda
Model: 98079-56846 (BPR6ES)
Thread Size: 14mm (standard for small engines)
Reach: 19mm (3/4 inch)
Heat Range: 6 (medium)
Electrode Material: Nickel alloy
Gap: 0.028-0.031 inches (pre-set, verify before install)
Compatible Engines: Honda GCV160, GCV160A, GCV160A0, GCV160E, GCV160LE, GCV160LA, GCV160LA0, GCV190
Weight: 2 ounces
OEM Part Number: 98079-56846
Pros
- OEM quality ensures reliable engine operation and extends engine life.
- Copper core delivers strong spark even in cold weather or high humidity conditions.
- Easy to install with a standard spark plug socket, no special skills required.
- Wide compatibility across Honda small engine lineup, from mowers to pressure washers.
Cons
- Not suitable for engines that specifically require iridium or platinum plugs (check owner's manual).
- Copper core wears faster than precious metal plugs, so replacement intervals may be shorter.
- Only fits specific thread size and reach, so always verify engine requirements before buying.
If you own a Honda powered lawn mower, generator, or pressure washer, the Genuine Honda OEM BPR5ES Spark Plug (98079-55846) is the exact part that keeps your engine running smoothly. This copper core spark plug is designed to deliver consistent ignition, easy starts, and reliable operation for small engines used in workshops and garages worldwide.
This plug is best suited for homeowners and DIYers who maintain their own outdoor power equipment, as well as mechanics and small engine repair shops looking for a direct factory replacement. Because it is an OEM part, you eliminate the guesswork of cross-referencing aftermarket plugs, ensuring proper heat range and thread reach every time.
In real world use, the copper core provides reliable spark across a range of temperatures and humidity levels. Users will notice quick startups and smooth idling, which is especially important for equipment that sits for weeks between uses. The 14mm x 1.25mm threads are standard for many Honda small engines, making installation straightforward with a socket and ratchet.
Build quality is exactly what you expect from Honda. The plug is manufactured in Japan with tight tolerances, ensuring the gap is correct out of the box and the electrode materials are consistent. At just an ounce, it's light and easy to handle, and the retail packaging makes it simple to store in your toolbox or parts drawer.
The main drawback is that copper plugs don't last as long as iridium or platinum versions. If your engine calls for a longer life plug, this isn't the right choice. Also, because it is engine specific, you must confirm that your equipment uses the BPR5ES heat range and thread length. For routine seasonal maintenance on Honda powered gear, this OEM spark plug is a smart, no compromise option that prioritizes reliability over hype.
Pros
- Wide compatibility with Honda and other major spark plug brands
- Durable construction with ceramic insulator and copper core
- Good value with 10 plugs per pack for multiple engines
- Easy to install with standard 14mm thread size
- Heat dissipation helps prevent misfires and overheating
Cons
- Brand is less known than NGK or Champion, so some users may prefer OEM
- Not suitable for engines requiring resistor-type plugs (F6RTC)
- Plugs may arrive loose in the box without individual packaging
If you own a Honda GX160, GX200, GX390, or any similar small engine, you know how important a reliable spark plug is for consistent starts and smooth operation. This 10-pack of F6TC spark plugs from Adefol is designed to be a direct replacement for popular models like NGK BP6ES and Champion N9YC. It's a budget-friendly option for anyone who maintains multiple pieces of equipment, from lawnmowers to generators.
These plugs are best suited for DIYers, mechanics, and homeowners who work with small engines in the 120cc to 459cc range. Whether you're tuning up a push mower, a pressure washer, or a go-kart, the F6TC fits the bill. The compatibility list is extensive, covering Honda, Bosch, Denso, and Torch equivalents, so you can stock up for several machines at once.
Performance-wise, the spark plug features a high-grade alumina silicate ceramic insulator and a pure copper core. The copper core promotes efficient heat transfer, which means faster warm-ups and reduced risk of overheating during extended use. The corrosion-resistant plating adds durability, especially if you store equipment in damp conditions. In real-world use, you can expect reliable ignition and consistent firing, which translates to easier starts and smoother idling.
Build quality is solid for the price point. The threads are clean and the hex size is standard (20.8mm), making installation straightforward with a standard socket. One drawback to note: these are non-resistor plugs, so they may cause interference with some electronic ignitions. Also, the Adefol brand isn't as well-known as NGK or Champion, which might give some buyers pause. However, the 10-pack offers great value, and the company backs it with a 100% refund guarantee.
Overall, this is a practical purchase for anyone who needs to keep multiple small engines running. If you're a contractor with a fleet of Honda-powered equipment or a DIYer with several lawn tools, the convenience and cost savings of a 10-pack are hard to beat. Just double-check that your engine doesn't require resistor plugs, and you'll be set for many seasons of reliable operation.
Thread Diameter: 14mm (9/16 inch)
Thread Length: 19mm (0.748 inch)
Hex Size: 20.8mm (0.82 inch)
Type: Non-resistor (standard F6TC)
Package Includes: 10 spark plugs
Color: 10 Pack F6TC Spark Plug
Product Group: Lawn & Patio
Replaces: NGK BP6ES, Bosch W6D, Champion N9YC, Denso W20EP, Torch F6TC F6RTC, Honda 98079-56841
Fits Honda engines: GX100, GX120, GX160, GX200, GX240, GX270, GX340, GX390, GCV135, GCV160, GCV190, and others in 5.5hp to 13hp range
Also suitable for: mini bikes, go-karts, golf carts, generators, water pumps, air compressors, lawn mowers, and small engines from 120cc to 459cc
Pros
- OEM quality guarantee eliminates guesswork and ensures proper compatibility
- NGK build quality means durable electrodes and reliable spark under various loads
- Pre-gapped design saves time during installation and reduces the risk of errors
- Improves cold starts and overall engine smoothness in power equipment
Cons
- Must verify your engine model numbers to avoid misapplication, as fitment is not universal
- May cost slightly more than generic aftermarket plugs, but the OEM reliability justifies the price
If you maintain small engines around your workshop or jobsite, you know how critical a good spark plug is. The Genuine Honda OEM Spark Plug 98079-55846, which is simply a rebranded NGK BPR5ES, is the exact plug used in a wide range of Honda power equipment. This includes popular lawn mowers, generators, pressure washers, and even some outboard motors. It's an essential replacement part for anyone who wants their equipment to start reliably and run efficiently.
This spark plug is best suited for DIY homeowners, landscapers, and contractors who rely on Honda-powered gear or any other small engine that calls for a BPR5ES. Whether you are tuning up your mower before spring or replacing a fouled plug on a generator after a long power outage, this plug delivers consistent ignition. The NGK manufacturing means you get a nickel alloy center electrode and a copper core that helps with heat dissipation, which translates to longer plug life and fewer misfires.
In real-world use, this plug fires up easily even after extended storage, provided the rest of the engine is in good shape. It operates well across a range of temperatures and loads, keeping your equipment from bogging down under heavy grass or when powering high-draw tools. The build quality is exactly what you expect from Honda and NGK. The threads are clean, the gap is factory set, and the porcelain insulator is strong. You can actually feel the difference in throttle response compared to cheaper generic plugs.
One drawback is that you must double-check your engine's model and code numbers. Honda makes many variations, and while the 98079-55846 fits most, it doesn't fit all. Also, these OEM plugs can be a bit pricier than off-brand options, but the reliability and peace of mind are well worth the extra dollar or two. For a workshop or jobsite that cannot afford downtime, this is a no-brainer.
Overall, if you own any Honda small engine or another piece of equipment that uses the NGK BPR5ES, buy this plug. It ensures your equipment starts quicker, runs cleaner, and lasts longer. For DIYers or pros who prefer to use genuine parts for critical components, this spark plug is a top-tier choice.
Pros
- Exact OEM fit for many Honda GX engines eliminates compatibility worries
- Good value with two plugs versus buying singles separately
- Installs easily with basic socket and gap tool; no modifications needed
Cons
- Only fits Honda engines listed, not universal for all small engines
- Copper core requires periodic replacement more often than iridium or platinum plugs
- Package includes two plugs; some users may need only one for a single-engine machine
The KINDZA genuine spark plug 98079-55846 is an OEM replacement for Honda small engines, designed to match the factory NGK BPR5ES specification. If you own a Honda-powered lawn mower, generator, pressure washer, or other equipment with a GX120, GX140, GX160, GX200, GX240, GX270, GX340, or GX390 engine, this plug is a direct swap. It’s a simple maintenance item that can bring back reliable starting and steady operation, especially if your current plug is fouled or worn.
This plug is best suited for DIY homeowners and small engine mechanics who work on Honda equipment. It’s not a performance upgrade, but it does exactly what a stock spark plug should do: provide a consistent spark for efficient combustion. In real-world use, you can expect smoother idling and quicker starts compared to a tired old plug. The copper core design is standard for this engine class and offers dependable service life if you stick to regular replacement intervals.
Build quality is straightforward – a steel shell, ceramic insulator, and copper center electrode. The plug comes pre-gapped, but it’s always wise to double-check with a feeler gauge before installation. The pack of two is a nice bonus for anyone maintaining multiple Honda engines or as a backup for the inevitable annual change. Installation takes about five minutes with a socket and ratchet, making it an easy weekend job.
One realistic limitation is that these plugs aren’t made from long-life materials like iridium, so you’ll need to replace them every season or every 100 hours of use, depending on your equipment. Also, the pack of two may be overkill if you only own one engine – you’ll have a spare, which isn’t a bad thing. But if you need a single plug, you’re still getting a fair deal.
Overall, the KINDZA 98079-55846 is a smart buy for anyone keeping Honda small engines in peak condition. It’s a no-fuss, factory-spec part that does its job without surprises. Pair it with a fresh air filter and oil change for a complete tune-up that keeps your mower or generator running strong through the season.
Pros
- Genuine OEM part guarantees compatibility with Honda engines and many other small engines.
- High build quality and materials provide reliable performance over many hours of use.
- Improves engine start-up consistency and reduces rough idling.
- Simple replacement process requires no special skills or tools.
Cons
- Price is higher than many aftermarket or generic alternatives.
- Not a universal fit; you must verify it matches your specific engine model (BPR6ES type).
- Does not provide a performance boost it is a standard replacement part for maintaining factory specs.
The Honda 98079-56846 spark plug is an OEM replacement part designed specifically for walk-behind mowers and other small engines that require a BPR6ES plug. While it is not a power tool itself, it is an essential maintenance component for the engines that power mowers, generators, pressure washers, and other workshop equipment. This plug is built to Honda's exact specifications and manufactured in Japan, ensuring consistent fit and function.
In real-world use, this spark plug delivers reliable ignition that helps engines start quickly and run smoothly. Homeowners and contractors who maintain their own small engine equipment will notice a difference in idle stability and throttle response compared to worn plugs. The consistent spark also contributes to better fuel efficiency and lower emissions, which is especially important for frequent use on larger properties or jobsites.
Build quality is a standout here. The shell is nickel-plated to resist corrosion, and the center electrode is made from a durable nickel alloy that withstands high heat and electrical erosion. Honda's rigorous quality control means each plug meets tight tolerance for gap and thread depth, reducing the risk of misfires or installation issues. This level of reliability matters when you are working under a deadline and need your equipment to perform.
Installation is straightforward with a standard plug socket and torque wrench (hand-tighten plus a quarter turn). The main drawback is the price, which is higher than many aftermarket plugs like NGK or Champion. However, for those who value OEM peace of mind and want to avoid compatibility guesswork, the cost is justified. It is also worth noting that this plug is not a performance upgrade it simply restores your engine to proper operating condition.
Overall, the Honda OEM BPR6ES spark plug is a smart investment for DIYers, landscapers, and anyone who relies on small engines for daily work. If you want a direct fit replacement that maintains your equipment's efficiency and longevity, this plug delivers exactly what it promises no more, no less.
Pros
- Genuine Honda OEM quality ensures compatibility and durability
- Two-pack offers good value for maintaining multiple engines
- Equivalent to NGK BPR6ES, a widely available and trusted spark plug
Cons
- Only fits specific Honda engine models, not universal
- Some users may prefer single plugs for lower upfront cost
If you own any Honda small engine equipment like a GX160 pressure washer, GX390 generator, or GCV160 lawn mower, you know how critical a good spark plug is for reliable operation. This 2-pack of genuine Honda spark plugs (part 98079-56846) is the exact OEM replacement, also known as the NGK BPR6ES. It is designed to deliver consistent ignition, smooth idling, and easy starts in a range of popular Honda engines used by contractors, landscapers, and DIYers.
In real-world use, a fresh spark plug can make a noticeable difference. If your engine is hard to start, misfires under load, or runs rough, swapping in one of these plugs is often the first fix. The copper core electrode provides good conductivity and heat range for general duty. For a contractor running a generator on a jobsite or a homeowner with a push mower, this plug helps maintain peak performance and fuel efficiency.
Build quality is exactly what you expect from Honda OEM parts. The plug is made in Japan, the threading is precise, and the gap is pre-set but always worth checking with a feeler gauge. Installation is straightforward with a standard spark plug socket and wrench. The 2-pack is a smart buy because it gives you a spare for another engine or a quick replacement later. No need to hunt for the right part when you need it most.
One realistic limitation is that this plug only fits specific Honda engine models, so it is not a universal option. Always double-check your engine model number before ordering. Also, if you prefer iridium or platinum plugs for longer life, this copper plug may require more frequent replacement, typically every 100-200 hours of use. For most small engines, that is a reasonable interval.
Overall, this genuine Honda spark plug 2-pack is a solid choice for anyone maintaining Honda-powered equipment. It offers OEM reliability, easy installation, and good value. Whether you are a pro landscaper or a weekend warrior, having a spare on hand is a practical move. Pair it with a fresh air filter and oil change for a complete tune-up.
Replacing the spark plug on a Honda lawn mower is a critical maintenance step that directly impacts engine performance and fuel efficiency. A worn or fouled plug can cause hard starting, poor idling, or increased fuel consumption. By following the manufacturer’s guidelines and using the correct replacement part, you can restore your mower to optimal condition. This process is safe and manageable for most DIY enthusiasts if proper precautions are taken.
| Component | Specification |
|---|---|
| Thread Diameter | 14mm (9/16 inch) |
| Thread Length | 19mm (0.748 inch) |
| Hex Size | 20.8mm (0.82 inch) |
| Common Heat Ranges | BPR5ES, BPR6ES, F6TC |
Before you begin, ensure the engine is completely cool to avoid burns. Gather your tools, including a socket wrench, spark plug socket, and a gap gauge. It is also helpful to have a clean workspace and a container for the old plug. Having the correct replacement part ready saves time and prevents confusion during the swap.
- Verify the engine is cool and the area is clear of debris.
- Locate the spark plug, often covered by a protective boot.
- Disconnect the spark plug wire to prevent accidental sparking.
- Remove the old plug using the appropriate socket size.
- Inspect the old plug for signs of wear or fouling.
- Check the gap on the new plug with a gauge.
- Install the new plug and tighten to the manufacturer’s torque.
- Reconnect the spark plug wire and test the engine.
Identifying the Correct Spark Plug for Your Model
Selecting the right spark plug is crucial for your Honda mower’s performance. The owner’s manual is the primary source for the correct part number and heat range. Many Honda models use plugs like the BPR5ES or BPR6ES, but you must confirm the exact specification for your engine. Using the wrong heat range can lead to pre-ignition or poor combustion, which damages the engine over time.
The part number is often listed in the manual or on a decal on the engine. For example, some GCV160 engines require a BPR6ES plug, while others may use a BPR5ES. Always cross-reference the part number with the manufacturer’s recommendations. If you are unsure, consult the dealer or use the part number from your owner’s manual to avoid compatibility issues.
Tools and Preparation for the Replacement
Having the right tools makes the job easier and safer. A 5/8 inch or 14mm spark plug socket is typically used for Honda mowers. A ratchet or wrench with an extension helps reach the plug in tight spaces. A gap gauge is essential for setting the correct electrode gap, which is usually around 0.030 to 0.035 inches. Ensure your tools are clean and free of debris before starting.
Prepare the workspace by cleaning the area around the spark plug. This prevents dirt from falling into the engine when you remove the old plug. It is also a good idea to have a shop rag to wipe away any oil or fuel residue. Keeping the area clean ensures a smooth installation and helps you spot any leaks or issues during the process.
Removing the Old Spark Plug
Start by disconnecting the spark plug wire from the terminal. This prevents any accidental sparking that could start the engine or cause a shock. Use the spark plug socket to turn the old plug counterclockwise until it loosens. If the plug is stuck, apply a small amount of penetrating oil and let it sit for a few minutes before trying again.
Once loosened, hand-tighten the plug out to avoid dropping it into the cylinder. Inspect the old plug for signs of wear, such as a cracked ceramic insulator or a worn electrode. A black, sooty plug indicates a rich fuel mixture, while a white or blistered plug suggests a lean mixture. This inspection can provide clues about other engine issues that need attention.
Setting the Gap on the New Plug
Before installing the new plug, you must verify the electrode gap. Use a gap gauge to measure the distance between the center and ground electrodes. The correct gap for most Honda mowers is specified in the owner’s manual, typically around 0.030 to 0.035 inches. If the gap is too wide or narrow, adjust it gently with a gap tool to match the specification.
Setting the correct gap ensures a strong, consistent spark for reliable ignition. A plug with an incorrect gap can cause misfires, poor fuel economy, and increased emissions. Take your time with this step, as it is critical for engine performance. Double-check the gap with the gauge to ensure accuracy before proceeding to installation.
Installing the New Spark Plug
Hand-thread the new spark plug into the engine to avoid cross-threading. Turn the plug clockwise until it stops, then use the socket wrench to tighten it to the manufacturer’s torque specification. Over-tightening can damage the plug or the engine head, while under-tightening can lead to leaks. Use a torque wrench if available to ensure the correct tightness.
Once the plug is securely installed, reconnect the spark plug wire to the terminal. Ensure the connection is tight to prevent arcing or signal loss. Clean any debris from the area around the plug before closing the engine cover. A proper installation ensures the plug stays in place and functions correctly during operation.
Testing and Verifying Engine Performance
After installation, start the engine and let it idle for a few minutes. Listen for any unusual noises, such as knocking or misfiring, which could indicate a problem. Check for any smoke or fuel leaks around the plug area. If the engine runs smoothly, the replacement was successful. If you notice issues, re-check the plug gap and installation.
Take the mower for a short test run to ensure it performs well under load. Monitor the engine for any changes in power or efficiency. A properly installed spark plug should improve starting and overall performance. If problems persist, consider consulting a professional or reviewing other maintenance items like the air filter and fuel system.
Common Mistakes to Avoid During Replacement
One common mistake is using the wrong spark plug heat range. Always verify the part number in the owner’s manual before purchasing. Another error is failing to check the gap on the new plug, which can lead to poor performance. Cross-threading the plug is also a frequent issue, so hand-thread it first to ensure proper alignment. These mistakes can cause engine damage and require costly repairs.
Ignoring the condition of the old plug can also lead to problems. A worn or fouled plug may indicate deeper engine issues that need attention. Failing to clean the area before installation can allow dirt to enter the engine, causing further damage. Taking the time to inspect and clean properly ensures a successful replacement and long-term engine health.
Maintenance Tips for Long-Lasting Spark Plugs
Regular maintenance extends the life of your spark plugs and improves engine performance. Check the plug condition during routine oil changes or seasonal maintenance. Inspect the electrodes for wear and the ceramic insulator for cracks. Replacing the plug at the manufacturer’s recommended interval prevents unexpected failures and maintains optimal combustion.
Using the correct fuel mixture and following the manufacturer’s guidelines also helps preserve plug life. Avoid running the engine under heavy loads for extended periods, as this can stress the plug. Keep the air filter clean to prevent dirt from entering the combustion chamber. These simple steps ensure your spark plugs last longer and your mower runs efficiently.
- Check plug condition during routine maintenance intervals.
- Use the correct fuel mixture to prevent fouling.
- Keep the air filter clean to reduce debris intake.
- Replace plugs at the manufacturer’s recommended interval.
- Inspect the ceramic insulator for cracks or damage.
- Monitor engine performance for signs of plug wear.
- Use the correct heat range for your specific model.
- Follow the owner’s manual for torque specifications.
When to Seek Professional Help
While spark plug replacement is a DIY-friendly task, some situations warrant professional assistance. If the plug is stuck and will not budge, a mechanic can use special tools to remove it without damaging the engine. If you notice persistent engine issues after replacement, such as misfires or poor performance, a professional can diagnose the underlying problem. This ensures your mower is safe and reliable for future use.
Consult a professional if you are unsure about the correct part number or installation procedure. They can provide guidance and ensure the job is done correctly. Professional help can also save you time and prevent costly mistakes. If you are also considering other equipment upgrades, our lawn mower for uneven terrain guide offers insights into choosing the right machine for your yard.
Replacing the spark plug on your Honda lawn mower is a manageable task that improves engine performance and reliability. By following the steps outlined here and using the correct parts, you can maintain your equipment with confidence. Regular maintenance ensures your mower runs smoothly and lasts for years. If you have any questions or need further assistance, refer to your owner’s manual or consult a professional.


Write Your Review
No reviews yet. Be the first to share your experience!