Where to Buy Honda Lawn Mower Blades: Sourcing Guide for 2026

The Grasscool HRR2169VKA mulching blade set is a solid choice for Honda mower owners looking to upgrade or replace worn blades without paying premium OEM prices. Built from alloy steel, these blades are designed to handle regular residential mowing and mulching tasks with reliable performance. The set includes both the upper and lower blade, matching Honda part numbers 72511-VL0-S00 and 72531-VH7-000, so you get the exact same cutting geometry as the original equipment.

These blades are best suited for homeowners who own Honda HRR216 or HRX217 walk-behind mowers. If you have one of the many compatible models listed by Grasscool, installation is straightforward just remove the old blades and bolt these on. The pre-applied paint coating protects the blade during storage and handling, and it wears off quickly in grass, revealing the bare steel underneath. No need to remove it beforehand.

In real-world use, the mulching action is effective at chopping clippings finely enough to break down quickly, returning nutrients to the soil. The cutting width is the standard 21 inches, and the blade's dimensions (20.8 inches long, 2.6 inches wide, 0.09 inches thick) match Honda spec, so you won't notice any difference in cutting swath or clearance. The alloy steel holds an edge reasonably well for a season of regular mowing, though very dense or wet grass might dull it faster than premium stainless blades.

Build quality feels adequate for the price point. The blades are slightly lighter than some HD aftermarket options, which reduces stress on the mower engine and spindle. However, some users report needing to check blade balance after installation for vibration-free operation, a common step for any replacement blade. The black paint can also flake off unevenly at first, but that's cosmetic and doesn't affect cutting.

On the downside, fitment isn't universal double check your mower's exact model number against the compatibility list. If you own a very specific HRR216 variant not listed, it might not fit perfectly. Also, the blades are manual power source (as listed) meaning they rely on the mower's engine; that's standard for all mower blades, but the spec mention seems odd.

Overall, the Grasscool HRR2169VKA blades offer a smart, budget-friendly replacement for Honda mower owners who want reliable mulching performance. They're a practical choice for DIY lawn care enthusiasts and homeowners who maintain their own equipment. If you're comfortable with basic blade installation and want to save a few bucks versus OEM, these are worth picking up.

Brand: Grasscool

Material: Alloy Steel

Color: Black

Item Weight: 1.5 Pounds

Cutting Width: 2.6 Inches

Product Dimensions: 0.09 x 2.6 x 20.8 inches

Replaces OEM Part Numbers: Lower 72511-VL0-S00, 72511-VH7-000; Upper 72531-VH7-000

Fitment: Compatible with Honda HRR216 and HRX217 series mowers

Before purchasing, confirm your mower's model number is on the compatibility list. The blades fit Honda HRR216K10PKAA, HRR216K10VKAA, HRR216K10VLAA, HRR216K10VYAA, HRR216K11PKAA, HRR216K11VKAA, HRR216K11VLAA, HRR216K11VYAA, HRR216K5VXAA, HRR216K6VKAA, HRR216K6VXAA, HRR216K7VKAA, HRR216K7VXAA, HRR216K8PKAA, HRR216K8VKAA, HRR216K9PKAA, HRR216K9VKAA, HRR216K9VLAA, HRR216K9VYAA, HRX217HMA, and HRX217HXA. Measure your existing blade length (should be about 20.8 inches) to ensure compatibility. Installation requires basic socket tools and safety gloves. Always disconnect the spark plug before servicing your mower. Check blade balance with a blade balancer if you notice vibration after installation.

The Fismiuta 21-Inch Twin Mower Blade Set is a heavy-duty replacement kit designed specifically for Honda walk-behind mowers running the dual-blade MicroCut system. If your mower has started tearing grass blades instead of slicing them clean, this pair brings back factory-level clipping performance. It is built for homeowners, landscape maintenance DIYers, and property managers who want pristine turf without paying premium dealership prices for OEM replacements.

Performance hinges on the coordinated twin-blade geometry. The lower high-lift blade acts as the primary cutter and fan, pulling bent grass upright and generating strong suction into the bagging chute. Right above it, the upper mulching blade shreds clippings into tiny particles before discharging them. The result is a clean, uniform cut that minimizes thatch buildup and packs bags far tighter than single-blade setups can manage.

Durability is backed by hardened high-carbon steel, giving both blades enough rigidity to brush off small twigs, pine cones, and incidental gravel. A smooth powder-coated finish protects the bare steel against wet grass acid and garage moisture during seasonal storage. Because both blades come balanced from the factory, you can mount them up without dealing with the annoying deck rattle or engine spindle wear caused by uneven aftermarket blades.

The installation process is straightforward using standard workshop hand tools, though you will need a reliable socket wrench and a wood block to lock the blades in place while tightening the bolts. Keep in mind that this kit is tailored specifically to Honda HRR, HRM, HRT, and HRZ decks, so it will not work on standard universal 21-inch walk-behind mowers. Overall, this set provides exceptional value and restores the crisp, manicured lawn stripe that Honda mowers are known for.

This twin-blade set replaces Honda OEM part numbers 72511-VE1-020 (lower blade) and 72531-VE2-020 (upper blade). It is compatible with the following walk-behind models:

Honda HRR216 Series: HRR216K1, HRR216K2, HRR216K3, HRR216K4, HRR216K5, HRR216K6, HRR216K7, HRR216K8

Honda HRM215 Series: HRM215K1, HRM215K2, HRM215K3, HRM215K4, HRM215PXA, HRM215SXA, HRM215HXA

Additional Series: HRT216SDA, HRT216TDA, HRZ216TDA

If you own a Honda HRN216 series lawn mower, keeping the blades sharp and properly balanced is key to a clean cut and a healthy lawn. The Honda Genuine OEM Blade Set (72511-VR8-M00 and 72531-VR8-M00) delivers exactly what you'd expect from the factory parts: a precise fit, balanced performance, and long-lasting durability. This set includes both the upper and lower blades, so you can replace them together and get back to mowing without any guesswork.

This blade set is best suited for homeowners and DIYers who want to maintain their Honda mower's original cutting quality. It's also a smart choice for anyone who values reliability over saving a few bucks on aftermarket blades. The blades are precision engineered to match OEM specs, which means they'll spin true and cut evenly without excessive vibration. That's a big deal for your mower's deck and engine over time.

In real-world use, these blades handle thick grass and uneven terrain well, thanks to their factory-balanced design. The cutting action is clean and consistent, which helps prevent tearing or browning of grass tips. Installation is straightforward if you're comfortable with basic mower maintenance, though you'll need to supply your own wrench and torque spec. The blades are made from hardened steel and hold an edge reasonably well, though you'll still want to sharpen them periodically for best results.

Build quality is exactly what you'd expect from Honda OEM parts: solid, consistent, and reliable. The black finish resists rust and corrosion, and the dimensions are spot-on for a perfect fit. On the downside, this set is only compatible with HRN216 series mowers, so it's not a universal option. And while the price is higher than generic blades, you're paying for guaranteed compatibility and performance.

Overall, if you want to keep your Honda HRN216 mower running like new, this genuine OEM blade set is a no-brainer. It's a simple upgrade that pays off in cut quality and mower longevity. For homeowners who do their own maintenance, it's a worthwhile investment that eliminates the hassle of finding the right aftermarket fit.

Color: Black

Dimensions: 21 x 3 x 1 inches

Product Group: Lawn and Patio

Binding: Sports

Compatibility: Honda HRN216PKA, HRN216PKAA, HRN216VKA, HRN216VKAA, HRN216VLA, HRN216VLAA, HRN216VYA, HRN216VYAA

Included Components: Upper blade (72511-VR8-M00) and lower blade (72531-VR8-M00)

This blade set is ideal for routine annual blade replacement on Honda HRN216 series mowers. It's perfect for homeowners who mow their own lawns and want to maintain factory cutting performance. It's also a solid choice for small landscaping businesses that rely on Honda equipment and need OEM parts for consistent results. Use it when your current blades are dull, nicked, or unbalanced to restore cut quality and reduce mower vibration.

When replacing mower blades, always use genuine OEM parts for the best fit and performance. Aftermarket blades can vary in thickness, balance, and material quality, which may affect cut quality and mower longevity. For Honda HRN216 owners, this blade set is the direct replacement you can trust. Be sure to sharpen new blades before first use for optimal cutting. Always disconnect the spark plug and wear gloves when handling blades. Check your mower's manual for torque specifications during installation.

If you own a Honda gas-powered walk-behind mower and want to improve your lawn's health while cutting down on yard waste, the Honda 08720-VH7-000 Mulching Blade Set is a solid investment. These are genuine OEM blades, meaning they're built to the same specs as the originals that came with your mower. No guesswork, no filing down edges to make them fit. They drop right in and get to work.

The main job of a mulching blade is to chop grass clippings into fine pieces that settle into the lawn and break down quickly, returning nitrogen and other nutrients to the soil. That's exactly what this set does. Instead of having to bag clippings or rake them up, you can leave them where they fall. Over time, this reduces the need for fertilizer and helps your lawn stay greener with less effort. For homeowners who take pride in their yard, that's a big win.

Constructed from alloy steel, these blades hold an edge well and resist bending or chipping when you hit the occasional hidden rock or root. The 53.3 cm cutting width is standard for many Honda push mowers, so you're not giving up any cutting swath compared to your original blade. They're also lightweight at just 0.25 pounds each, which helps keep your mower balanced and reduces strain on the engine.

One thing to keep in mind is that these blades are specifically designed for mulching. If you prefer to side-discharge or bag your clippings, you'll want a different blade. Also, like any blade, they'll need sharpening after a season or two of heavy use, especially if you mow frequently or in tough conditions. But that's normal maintenance for any mower blade.

Overall, the Honda 08720-VH7-000 Mulching Blade Set is a straightforward, reliable choice for anyone with a compatible Honda mower who wants to mulch effectively. It's a simple upgrade that pays off in a healthier lawn and less time spent dealing with clippings. If you're already invested in the Honda platform, this is the blade to get.

Brand: Honda

Model Number: 08720-VH7-000 (includes 72531-VH7-000 and 72511-VH7-000)

Power Source: Gasoline-powered mowers

Material: Alloy Steel

Color: Black

Style: Manual

Item Weight: 0.25 Pounds per blade

Cutting Width: 53.3 Centimeters

Product Dimensions: 24 x 4 x 4 inches

UPC: 786102002394

ASIN: B00GIDK42W

The Eyoloty 72531-VH7-000 replacement blade set is designed specifically for Honda 21 inch mowers with the MicroCut twin-blade system. This 4-pack includes two upper blades (72531-VH7-000) and two lower blades (72511-VH7-000), giving homeowners a complete replacement set for both positions. If you own a Honda HRR216, HRX217, HRX537, HRB535, HRD536, or HRX21K2, these blades are made to match the original dimensions and mounting holes.

This set is best suited for suburban lawn owners and homeowners who want to keep their Honda mower cutting like new without paying dealer prices. First-time mower buyers and budget-conscious shoppers may appreciate having two full sets on hand, since blades wear down over time and need regular replacement. The high-grade hardened steel with corrosion-resistant coating is designed to handle dense wet grass, dry leaves, and routine weekly mowing across American lawns.

In real-world use, the razor-sharp edges and air lift design help maintain consistent cutting speed. According to the product description, the twin-blade MicroCut system can produce fine mulch, and the bagging airflow may increase bag capacity by up to 30%. That means fewer stops to empty the bag during peak growing season. For homeowners who prefer mulching, the fine clippings break down quickly and return nutrients to the soil. The dimensions are specific: upper blade measures 20 13/16 inches long, while the lower blade is 20 3/4 inches long, so be sure to check your original parts before ordering.

Build quality looks solid for the price. The hardened steel construction and corrosion-resistant coating should hold up well in humid climates and wet morning grass. The blade set includes both upper and lower blades, which is convenient because Honda's twin-blade system requires both pieces to work properly. Many users will find the installation straightforward if they have basic tools, but you should always disconnect the spark plug and tip the mower safely before swapping blades.

One realistic limitation is compatibility. Although the brand lists many Honda models, not every 21 inch Honda mower uses this exact blade set. You need to verify your original part numbers and deck model before purchasing. Also, this is a replacement part, not a full mower, so it won't fix underlying engine or drive issues. Some budget-conscious shoppers may find the 4-pack price slightly higher than single-blade options, but having spares means you are ready for the whole season. Keep the spare set in a dry place in your garage or shed so it's always ready when you need it.

Overall, this Eyoloty 4-pack is a practical choice for Honda owners who want reliable mulching and bagging performance. It suits suburban lawns, small to medium yards, and anyone who maintains their equipment regularly. If you confirm compatibility before buying, this blade set offers strong value and helps keep your Honda mower running at its best all season long.

The Bularie 21-Inch Mulching Mower Blade Kit is an aftermarket replacement set designed specifically for Honda walk-behind mowers equipped with dual-blade cutting decks. Operating as a stacked pair, the kit includes the upper blade (72531-VE2-020) and lower cutting blade (72511-VE1-020). This twin-blade design functions by having the lower blade slice the grass while the upper blade creates high-velocity updraft, suspending the clippings long enough to chop them into fine, quick-decomposing mulch. For homeowners and DIY groundskeepers running older or hard-working Honda mowers, it offers an economical way to keep the lawn healthy without dealership markups.

In practical lawn maintenance, blade condition directly impacts your mower's fuel efficiency, engine load, and overall grass health. Dull or warped blades tear the tips of grass blades, causing brown fraying and inviting disease. This Bularie set delivers the proper blade geometry to restore clean, crisp cuts across common turf varieties like Kentucky Bluegrass, Fescue, and Bermuda. The balance out of the box is consistent, meaning you will not deal with unwanted deck vibration that can prematurely wear out engine crankshafts and blade adapters.

Build quality centers on solid steel stock treated with a black powder coating. While the cutting edge naturally sheds its coating during the first pass through the grass, the protective layer across the blade body helps keep damp clippings from triggering rapid surface rust. The steel holds up well against incidental contact with small sticks, light gravel, and pinecones. The only real trade-off is that you must reuse your existing Honda mounting bolts, washers, and alignment brackets, as no hardware comes in the package. Checking your factory bolts for thread stretch or wear before installing this kit is a sensible workshop practice.

If your Honda mower is leaving uneven stragglers, clumping clippings in mulch mode, or bogging down in damp spring grass, this two-pack replacement blade kit gets your machine cutting like new. It is a straightforward, budget-conscious choice for anyone handling regular yard care who wants clean lines and healthy turf all season long.

This blade set is engineered to match the original twin-blade deck configuration on 21-inch Honda gas-powered walk-behind mowers. Verify your mower's exact model tag located on the rear deck before ordering.

Compatible Honda Mower Series:

HRB215 (K1 through K4 models), HRB216, HRB217, HRM215 (K1 through K4 models), HRR216 (K2 through K8 models), HRS216 (K1 through K4 models), HRT216 (K1 and K2 models), and HRZ216.

Interchangeable OEM Part Numbers:

Lower Blade: 72511-VE1-020, 72511-VE1-010, 72511-VE1-001, 72511-VG3-000, 72511-VH7-000, and Oregon 91-517.

Upper Blade: 72531-VE2-020, 72531-VE2-010, 72531-VH7-000, 72531-VE2-001.

Swapping your mower blades is a quick job, but basic workshop safety rules apply. Always pull the spark plug boot off the spark plug and turn off the fuel shutoff valve before tipping the mower deck up. Tip the mower with the air filter side facing upward to avoid engine oil draining into the carburetor or air filter housing.

Use a heavy pair of work gloves or block the blade rotation with a scrap block of 2x4 lumber wedged against the deck wall. Remove the two mounting bolts and curved friction washers using the correct metric socket. Pay attention to how the upper and lower blades nest together: the lower blade has the cutting edges facing the turf, while the upper blade sits above it to facilitate the mulching chop.

Scrape dry grass buildup from under the deck while the blades are removed. Line up the new Bularie blades onto the mounting studs, reapply your original hardware, and tighten the bolts firmly to your mower manufacturer's recommended torque specifications. To extend blade life, rinse dry grass off after mowing and hone the bevel with a hand file halfway through the cutting season.

The Oregon 21-inch lawn mower blade is a straightforward replacement option for owners of select Honda HRR216 walk-behind mowers. If you're tired of a ragged cut or frequent blade dulling, this blade is built to deliver a cleaner, more consistent performance. It's designed for homeowners and DIYers who maintain their own yards and want a dependable part without the hassle of hunting for OEM specs.

Out of the box, the blade feels solid. The steel is thick enough to resist bending on small rocks or roots, yet not so heavy that it throws off the mower's balance. Installation is simple: line up the center hole and outer holes, torque the bolt, and you're done. The fit on the HRR216K9, K10, K11, and similar models is precise, so there's no wobble or vibration during operation.

Performance-wise, this blade cuts cleanly. It lifts the grass well and discharges it smoothly, reducing the chance of clumps on the lawn. The edge retention is noticeably better than some budget blades, meaning you'll spend less time sharpening and more time mowing. For a typical suburban yard, it handles weekly cuts without any struggle.

One thing to keep in mind is compatibility. This blade is specifically for 21-inch decks with a 20-7/8-inch blade length and specific hole spacing. Always verify your mower's manual before buying. It's not a universal blade, but for the right Honda models, it's a perfect match.

Overall, the Oregon 21-inch blade is a solid choice for the DIY homeowner who wants a reliable, long-lasting blade that's easy to install. It won't turn your mower into a commercial machine, but for regular residential use, it offers excellent value and performance. If you're looking for a hassle-free replacement that keeps your lawn looking sharp, this is worth picking up.

Keeping a lawn looking crisp requires sharp, properly balanced blades, and this JSXDNWYJ 2-pack mulching set provides an affordable direct replacement for Honda 21-inch walk-behind mowers. Designed to replace OEM parts 72511-VL0-S00 (lower cutting blade) and 72531-VH7-000 (upper mulching blade), this pair caters directly to homeowners, DIYers, and residential property maintainers running Honda HRR216, HRN216, or select HRX217 decks. If your current set has suffered through rocks, roots, and multiple seasons of dulling, swapping them out brings back that manicured finish.

The twin-blade arrangement is vital for Honda's twin-blade cutting system. The upper blade slices the grass initially and creates strong updraft airflow, while the trailing lower blade recuts the falling clippings into fine mulch that settles back into the turf without clumping. These replacement blades are stamped from heat-hardened carbon steel, giving them the rigidity needed to resist deflection and minor impacts. Center mounting holes and alignment notches line up well with Honda's blade carrier plate, minimizing the risk of uneven tracking or heavy vibration at full throttle.

From a workshop maintenance perspective, swapping these blades requires only basic mechanical skills: a 14 mm socket, a torque wrench, a pair of thick work gloves, and a block of wood to wedge the deck. One realistic trade-off is the factory edge finish. Like many aftermarket replacement blades, they feature a thick protective powder coat over the cutting bevel. While they cut fine out of the box, spending five minutes with a hand mill bastard file to strip the paint off the bevel and refine the apex will dramatically improve cutting efficiency in wet or overgrown spring grass.

For routine yard maintenance, seasonal tune-ups, or keeping a spare pair ready in your workshop, this blade set is an easy recommendation. It delivers clean mulching action, solid durability against everyday lawn hazards, and substantial savings over OEM replacement costs.

This dual-blade replacement set is designed specifically for 21-inch Honda walk-behind lawn mowers equipped with the twin-blade system. It directly replaces factory part numbers 72511-VL0-S00 (lower blade) and 72531-VH7-000 (upper blade).

Compatible Honda models include:

• Honda HRR216 Series: HRR216K5, HRR216K6, HRR216K7, HRR216K8, HRR216K9, HRR216K10, and HRR216K11 (including sub-models VKA, VKAA, VLAA, VYAA, PKAA, and VXAA)
• Honda HRN216 Series walk-behind models
• Honda HRX217 Series models including HRX217HMA and HRX217HXA

Always verify your mower model number stamped on the rear deck or deck frame before ordering to ensure correct bolt-hole pattern matching.