Tiectown Mower Blade Options of 2026

The MaxPower 331528B is a replacement mulching blade designed for many 21-inch cut walk-behind mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. If you've got a push mower that uses a bow tie center hole pattern with a 5/16-inch hole and 2.5-inch spacing, this blade is likely a direct drop-in. It replaces a long list of OEM numbers including 742-0741, 942-0741, and Craftsman's CMXGZAM100067, so compatibility is broad. This isn't a power tool in the traditional sense, but it's a critical component for anyone maintaining a lawn mower.

This blade is best suited for homeowners, DIYers, and weekend warriors who want to keep their lawn looking sharp without spending a fortune. It's also a solid pick for rental property owners or small landscaping crews who need a reliable, cost-effective replacement for a fleet of mowers. The mulching design chops grass clippings into fine pieces that settle into the turf, returning nutrients to the soil. That means less bagging and a healthier lawn overall.

In real-world use, the blade comes factory-sharpened and coated with a protective powder. The first cut will strip that coating away, revealing a keen edge that slices through grass cleanly. Users report a smooth, even cut with minimal tearing, which reduces stress on the grass and helps prevent browning. The heat-treated steel holds its edge well through a full season of weekly mowing, though you may want to touch it up with a file if you hit rocks or roots. Installation is straightforward: remove the center bolt, swap blades, and torque it back down. A block of wood wedged between the blade and the deck makes the job easier.

Build quality is solid for an aftermarket blade. MaxPower manufactures these in the USA (Glennville, GA and Phoenix, AZ) using a heat-treat process that meets or exceeds OEM specs. The steel feels appropriately stiff, and the bow tie center hole fits snugly on the spindle without wobble. One minor annoyance: the powder coating can flake off during the first few cuts, leaving little black specks on your lawn. That's cosmetic and harmless, but worth noting. Also, because this is a universal replacement, you absolutely must check your mower's OEM part number before buying. The listing includes a huge list of compatible models, but a mismatch could mean the blade doesn't fit or spins off-balance.

Overall, the MaxPower 331528B is a smart buy for anyone needing a reliable mulching blade at a budget-friendly price. It cuts well, fits a wide range of mowers, and is built to last. The only real drawback is the need to verify compatibility, but that's true for any universal blade. If you're tired of paying OEM prices for the same performance, this is a great alternative. Just double-check your part number, and you'll be back to mowing in no time.

Blade Length: 21 inches

Blade Width: 2.25 inches

Center Hole: Bow tie pattern, 5/16-inch diameter outer holes, 2.5-inch center-to-center spacing

Weight: 1.6 pounds

Material: Heat-treated steel

Finish: Powder-coated (wears off on first use)

Manufacturer: MaxPower (USA-made in Glennville, GA and Phoenix, AZ)

Model Number: 331528B

Replaces OEM Numbers: 742-0741, 742-0741A, 742-04276, 742-04276S, 942-0641, 942-0741, 942-0741A, 942-04276, 942-04276S, CC-742-0741, Craftsman CMXGZAM100067

This blade fits many 21-inch cut mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. Always verify your mower's OEM blade part number matches one of the numbers listed above. Common compatible models include:

Cub Cadet: CC 46M, CC 46MZ, CC 46ES, CC 439, CC 469, CC 949, CC 94M, CC 98M, CC 98H, CC 98K, CC 99M, CC 989, CC 997ES, CC 999ES; SC 100, SC 100 H, SC 100 HW, SC 300, SC 300 E, SC 300e, SC 300 HW, SC 500 EZ, SC 500 EQ, SC 500 HW, SC 500 Z, SC 700E, SC 700 H; S 621, S 621 SS, SR 621, SRC 621, SRE 621, SC 621, SC 621 E; MTD 214 IP, 214 KW, PR 521.

Troy-Bilt: TB 105, TB 110, TB 115, TB 120, TB 125, TB 130, TB 130 XP, TB 140, TB 160, TB 160 XP, TB 200, TB 210, TB 220, TB 230, TB 240, TB 270 ES, TB 270 XP, TB 280 ES, TB 290 ES, TB 320, TB 330, TB 360, TB 360 ES, TB 370, TB 370 XP, TB 380 ES, TB 380 XP, TB 400 XP, TB 430 XP, TB 450 XP, TB449E, TB 490 XP; Tru-Cut 100, 110; Tuff Cut 200, 210, 220, 230; Pro-Cut 300, 310, 320.

Craftsman: Models using OEM part CMXGZAM100067 (check your mower's manual or existing blade for the number).

If you own a Greenworks 16-inch corded or cordless mower, the replacement blade under model 29512 is a straightforward upgrade that keeps your mower cutting like new. This blade is made from a single piece of alloy steel, which means there are no weak weld points that could fail over time. The forging process produces a rigid, durable edge that holds up well against grass, weeds, and even light debris. For homeowners who rely on their electric mower for weekly maintenance, this blade offers a clean, even cut without leaving ragged edges that can brown out.

The installation process is simple. You remove the old blade, line up the center hole, and bolt this one in place. The 15.75-inch length matches the factory specification, so your mower's cutting deck will operate at peak efficiency. Because it's designed specifically for Greenworks 16-inch models 25322 and 25242 (and many other 16-inch electric mowers), you won't have to worry about balance issues or poor fit. Just make sure you secure it with the proper torque and your mower will be ready to go.

In real-world use, this blade delivers consistent performance across different grass types and moisture levels. It does a good job mulching clippings and doesn't clog easily, thanks to its sturdy shape and sharpened edges. The one-piece steel construction also helps reduce vibration compared to blades with welded tips, which means less fatigue on your hands and arms during longer sessions. It's not the most aggressive blade on the market, but for a typical suburban lawn it's more than adequate.

Build quality is solid. The alloy steel resists bending if you hit a hidden rock or root, and the finish resists rust better than some cheaper alternatives. That said, like any mower blade, it will eventually need sharpening. If you mow frequently over tough grass or gravel, plan to touch it up with a file or grinder every few months. The lightweight design (just under 0.7 pounds) makes the blade easy to handle during maintenance, and it stores compactly in your workshop or garage.

One limitation is that it's not a universal blade. It only fits 16-inch mowers with the specific center hole pattern. Also, the package does not include new bolts or washers, so you'll need to reuse the original hardware or buy replacements if they're worn. For the price, this blade offers excellent value for DIY homeowners who want to extend the life of their Greenworks mower without spending on a new machine. It's a practical, reliable choice that gets the job done neatly.

Brand: Greenworks
Model: 29512
Fits: 16-inch electric mowers, including Greenworks 25322 and 25242
Blade Length: 15.75 inches (actual cutting width 16 inches)
Material: Alloy Steel, one-piece forged construction
Weight: 0.69 pounds
Dimensions: 15.75 x 1.97 x 0.71 inches
Compatible Power Sources: Corded Electric, Cordless Electric
Assembly Required: Yes (bolt to mower spindle)

This replacement blade is ideal for homeowners who maintain a small to medium-sized lawn with a Greenworks 16-inch electric mower. It's perfect for routine weekly mowing of Bermuda, fescue, or rye grass. Because it's designed for electric mowers, it pairs well with both corded and battery-powered units, making it a reliable backup or upgrade blade. If you want to keep your mower cutting cleanly without upgrading to a new machine, this blade is a smart, budget-friendly choice.

The TIECTOWN 2026 Upgrade 16-Inch Electric Dethatcher and Scarifier is a purpose-built lawn care tool designed for homeowners who want to restore their turf without renting heavy machinery. It's not a mower - it's a specialized machine that removes thatch (dead grass) and scarifies (cuts into the soil) to promote healthier root growth. Think of it as a power rake for your lawn.

Best suited for DIY homeowners with small to medium-sized lawns (up to a half acre), this tool excels at prepping lawns for overseeding or just giving tired grass a fresh start. The 15.5-amp motor drives the 16-inch rake path at 3600 RPM, which is enough to pull up thick mats of thatch and slice through compacted soil. In practice, you'll see it lift out debris that a standard rake would leave behind, and the included 14.5-gallon collection bag keeps most of the mess contained.

Build quality is solid for the price point - the plastic housing feels durable enough for seasonal use, and the steel blades seem well made. The five-position depth adjustment is easy to set with a lever, letting you dial in how deep you want to work. Switching between dethatching and scarifying blades is tool-free and takes about 30 seconds; just pull the pin, swap the reel, and lock it back. The foldable handle and 30-pound weight make it convenient to carry to the shed or hang on a wall hook.

On the flip side, it's corded, so you'll need a heavy-duty extension cord (14 AWG up to 50 feet, 12 AWG up to 100 feet). For larger lawns, that means moving the cord around or using multiple outlets. Also, it's not a mower - don't expect it to cut grass. It's strictly for thatch removal and soil aeration. The collection bag works well but fills up faster on thick lawns, so you might need to empty it a few times per session.

Overall, the TIECTOWN dethatcher is a smart buy for homeowners who want to maintain a lush, healthy lawn without paying for professional aeration services. It's easy to use, stores compactly, and delivers noticeable results after one pass. If you're looking to improve your lawn's density and color, this tool is worth the investment.

Motor Power: 15.5 Amp peak (15 Amp running)
No-Load Speed: 3600 RPM
Rake Path: 16 inches
Depth Adjustment: 5 positions (scarifying: -0.47" to 0.24"; dethatching: -0.32" to 0.39")
Collection Bag Capacity: 14.5 gallons
Weight: 30 pounds
Handle: Foldable, 3-position height adjustment
Blade Type: 2-in-1 quick-release (dethatching and scarifying)
Cord Management: Cord clip and extension cord holder
Plug Type: Waterproof
Power Source: Corded electric (120V AC)
Dimensions: 24.8 x 20 x 11.42 inches
Color: Green

This dethatcher/scarifier is perfect for spring and fall lawn renovation projects. Use it to remove thatch before overseeding, or to break up compacted soil that's preventing water and nutrients from reaching the roots. It's also great for preparing a lawn for aeration - running the scarifier first opens up the ground so core aeration is more effective. For homeowners with small to medium yards (up to 10,000 square feet), it's a practical alternative to renting a gas-powered dethatcher. Just be sure to use a heavy-duty extension cord and avoid wet grass to prevent clogging.

The TIECTOWN LM01 16-Inch Replacement Scarifier Blade is a dedicated working cylinder designed for electric lawn dethatchers and scarifiers. Instead of light-duty wire springs that merely comb the surface, this assembly uses fixed steel blades that slice straight into the soil line. It is built for homeowners, weekend DIYers, and property care enthusiasts who manage seasonal turf renovations and need to break up suffocating thatch layers before reseeding or fertilizing.

In real-world yard applications, dull or worn scarifier blades drag through turf instead of making clean vertical cuts, bogging down the electric motor and leaving behind dense mats of dead roots. Swapping in the LM01 restores clean slit-cutting action across a full 16-inch path. The rotating blades slice cleanly into the root zone, pulling up accumulated dead stolons, creeping moss, and packed organic debris that block water and nutrients from reaching healthy soil.

From a workshop perspective, replacing the scarifier drum is a straightforward mechanical fix. You do not need specialized service tools; an ordinary hex key or socket set lets you open the lower housing, slide the old cartridge off the drive hub, and drop this replacement right onto the bearing block. Building out a tool this way gives your existing electric equipment several more seasons of dependable service, sparing you the hassle and expense of replacing an otherwise functional motor chassis.

Keep in mind that fitment is specific. You should verify your dethatcher model and compare the drive-end geometry before mounting. You will also need to retain your original retaining bolts and end caps, as this package is purely the replacement blade cylinder. If you own a compatible 16-inch TIECTOWN machine that is struggling with sluggish performance on thick turf, this replacement blade assembly is an easy, cost-effective way to get your lawn care setup working like new again.

This replacement scarifier cylinder excels during spring and early autumn lawn rejuvenation projects. Use it when turf suffers from water runoff caused by packed soil or thick moss carpets that light raking cannot dislodge. It is also ideal for preparing a lawn bed prior to overseeding, as the vertical blades score shallow trenches that provide optimal seed-to-soil contact.

For best results, mow your lawn to a slightly lower height before running the scarifier, and make sure the soil is lightly moist rather than bone-dry or soaked. After finishing your passes, clean off clinging soil and grass from the blades with a stiff shop brush before storing the machine inside your garage or shed.

The TIECTOWN LM01 16-inch dethatcher blade is a dedicated maintenance reel built for compatible electric dethatcher and scarifier units. When your electric rake begins skipping over compacted dead turf or leaves dense moss behind, swapping in a fresh tine drum brings back original clearing power. This assembly is designed specifically for homeowners, DIY groundskeepers, and property owners who need to prep their turf for spring green-up or fall overseeding without buying a completely new power tool.

In terms of construction and usability, this reel utilizes a durable metal cylinder fitted with flexible steel spring tines. Its most convenient practical feature is the tool-free quick-release mechanism. Instead of searching around the garage for Allen keys or socket sets, the drum aligns with the machine housing and snaps securely into position with a quick click. The 16-inch path matches the original factory swath, lifting matted grass and debris out of the turf canopy so water and nutrients can penetrate into the root zone.

Every tool attachment has realistic limitations. Because this reel relies on specific drive-end dimensions and locking tabs, compatibility is strictly limited to TIECTOWN 16-inch electric models rather than functioning as a universal replacement. Additionally, while the spring tines handle thick organic thatch reliably, running the machine over hidden flagstones, metal sprinkler heads, or exposed surface tree roots can bend or damage the wire tines over time.

For owners of TIECTOWN dethatchers whose original tines have worn flat or lost tension after multiple yard renovations, the LM01 cylinder is a direct, budget-friendly replacement. It provides dependable raking action, hassle-free installation, and the seasonal durability needed to keep turf healthy year after year.

Brand: TIECTOWN

Model Number: LM01

Component Type: Replacement Dethatcher Reel Drum

Working Width: 16 Inches

Material: All-Metal Drum with Steel Spring Tines

Installation Type: Tool-Free Quick-Release Click-Lock

Dimensions: 16.9 x 5.9 x 5.7 inches

Compatibility: TIECTOWN 16-Inch Electric Dethatchers and Scarifiers

Spring Turf Cleanup: Clearing out matted dead grass, winter mould, and built-up yard debris before applying early spring fertilizers.

Fall Overseeding Prep: Opening up the soil surface by raking away thick thatch layers, allowing new grass seed to make direct soil contact.

Seasonal Moss Remediation: Pulling shallow-rooted moss out of shady, moisture-prone lawn sections to prevent turf suffocation.