Safer Mower Blade of 2026

The MaxPower 331528B is a replacement mulching blade designed for many 21-inch cut walk-behind mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. If you've got a push mower that uses a bow tie center hole pattern with a 5/16-inch hole and 2.5-inch spacing, this blade is likely a direct drop-in. It replaces a long list of OEM numbers including 742-0741, 942-0741, and Craftsman's CMXGZAM100067, so compatibility is broad. This isn't a power tool in the traditional sense, but it's a critical component for anyone maintaining a lawn mower.

This blade is best suited for homeowners, DIYers, and weekend warriors who want to keep their lawn looking sharp without spending a fortune. It's also a solid pick for rental property owners or small landscaping crews who need a reliable, cost-effective replacement for a fleet of mowers. The mulching design chops grass clippings into fine pieces that settle into the turf, returning nutrients to the soil. That means less bagging and a healthier lawn overall.

In real-world use, the blade comes factory-sharpened and coated with a protective powder. The first cut will strip that coating away, revealing a keen edge that slices through grass cleanly. Users report a smooth, even cut with minimal tearing, which reduces stress on the grass and helps prevent browning. The heat-treated steel holds its edge well through a full season of weekly mowing, though you may want to touch it up with a file if you hit rocks or roots. Installation is straightforward: remove the center bolt, swap blades, and torque it back down. A block of wood wedged between the blade and the deck makes the job easier.

Build quality is solid for an aftermarket blade. MaxPower manufactures these in the USA (Glennville, GA and Phoenix, AZ) using a heat-treat process that meets or exceeds OEM specs. The steel feels appropriately stiff, and the bow tie center hole fits snugly on the spindle without wobble. One minor annoyance: the powder coating can flake off during the first few cuts, leaving little black specks on your lawn. That's cosmetic and harmless, but worth noting. Also, because this is a universal replacement, you absolutely must check your mower's OEM part number before buying. The listing includes a huge list of compatible models, but a mismatch could mean the blade doesn't fit or spins off-balance.

Overall, the MaxPower 331528B is a smart buy for anyone needing a reliable mulching blade at a budget-friendly price. It cuts well, fits a wide range of mowers, and is built to last. The only real drawback is the need to verify compatibility, but that's true for any universal blade. If you're tired of paying OEM prices for the same performance, this is a great alternative. Just double-check your part number, and you'll be back to mowing in no time.

Blade Length: 21 inches

Blade Width: 2.25 inches

Center Hole: Bow tie pattern, 5/16-inch diameter outer holes, 2.5-inch center-to-center spacing

Weight: 1.6 pounds

Material: Heat-treated steel

Finish: Powder-coated (wears off on first use)

Manufacturer: MaxPower (USA-made in Glennville, GA and Phoenix, AZ)

Model Number: 331528B

Replaces OEM Numbers: 742-0741, 742-0741A, 742-04276, 742-04276S, 942-0641, 942-0741, 942-0741A, 942-04276, 942-04276S, CC-742-0741, Craftsman CMXGZAM100067

This blade fits many 21-inch cut mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. Always verify your mower's OEM blade part number matches one of the numbers listed above. Common compatible models include:

Cub Cadet: CC 46M, CC 46MZ, CC 46ES, CC 439, CC 469, CC 949, CC 94M, CC 98M, CC 98H, CC 98K, CC 99M, CC 989, CC 997ES, CC 999ES; SC 100, SC 100 H, SC 100 HW, SC 300, SC 300 E, SC 300e, SC 300 HW, SC 500 EZ, SC 500 EQ, SC 500 HW, SC 500 Z, SC 700E, SC 700 H; S 621, S 621 SS, SR 621, SRC 621, SRE 621, SC 621, SC 621 E; MTD 214 IP, 214 KW, PR 521.

Troy-Bilt: TB 105, TB 110, TB 115, TB 120, TB 125, TB 130, TB 130 XP, TB 140, TB 160, TB 160 XP, TB 200, TB 210, TB 220, TB 230, TB 240, TB 270 ES, TB 270 XP, TB 280 ES, TB 290 ES, TB 320, TB 330, TB 360, TB 360 ES, TB 370, TB 370 XP, TB 380 ES, TB 380 XP, TB 400 XP, TB 430 XP, TB 450 XP, TB449E, TB 490 XP; Tru-Cut 100, 110; Tuff Cut 200, 210, 220, 230; Pro-Cut 300, 310, 320.

Craftsman: Models using OEM part CMXGZAM100067 (check your mower's manual or existing blade for the number).

The Greenworks 2905203 is exactly what you want when it is time to replace the blade on your compatible 21-inch Greenworks mower. This is an OEM part, meaning it comes from the same factory that supplies blades with your original mower. If you have a Greenworks 80V, 60V, 40V, or 2x24V model that uses a 21-inch cutting deck, this blade is the most straightforward replacement option available.

This blade shines most for the suburban homeowner who mows an average lawn once a week. The cutting edge arrives sharp enough to slice cleanly through grass and even light weeds right out of the box. I have used these on a Greenworks 80V mower for two seasons, and the blade still cuts well with occasional sharpening. The steel feels sturdy it does not bend or chip easily if you accidentally hit a small rock or a root. Installation is simple: flip the mower on its side, remove the center bolt, swap blades, and tighten. No special tools required.

Build quality is typical of a well-made OEM blade. The center hole and mounting pattern match the mower spindle precisely, so you will not fight with alignment. The black coating resists rust better than plain steel, which is nice if you store your mower in a damp garage. One practical benefit of choosing OEM is the balance. Aftermarket blades sometimes come slightly off-balance, causing vibration that can loosen bolts or wear out bearings. This Greenworks blade spins true, keeping things smooth and quiet.

There is one realistic limitation: this blade only works if your mower uses the specific mounting pattern shown in the product images. Greenworks makes different blade patterns for different mower series, so you cannot assume all 21-inch blades fit. Check your mower model number against the long compatibility list in the description. Also, this is a standard lift blade, not a mulching or high-lift blade. If you bag clippings or need aggressive mulching, you might want a dedicated blade for that task. But for everyday cutting and side discharge, this blade does the job very well.

For the homeowner with a compatible Greenworks mower who just wants a reliable, drop-in replacement that restores factory cutting performance, the Greenworks 2905203 is an easy recommendation. It fits, it cuts, and it lasts. Keep one on hand so you are never stuck with a dull blade mid-season. If you own multiple compatible Greenworks mowers, buying a spare makes sense since the same blade fits across many models. Solid value, no fuss.

Color: Black
Size: 21 inch (2905203)
Dimensions: 20 x 1.5 x 2 inches
Weight: 1 pound
Product Group: Lawn and Patio
Binding: Lawn and Patio

80V Mowers: 2550702, 2550402, 2501202, 2500402, 1356602, 1356702, 1356402, 1356502, 2533902, 2541302, 2533402, 2533602, 2502202, 2506902, 2515902, 2534102, 2502402NV, 2533302, 2541202

60V Mowers: 2531702, 2531602, 2545102, 2531702T, 2531602T, 2535102T, 2504902T, 2509802

40V Mowers: 2515502, 1306402AZ, 2527302AZ, 2525202, 2516402, 1348402-HB, 2525102AZ, 2506502AZ, 2508502, 2506602, 2513502

2x24V Mowers: 2533202, 2532702, 2532502, 2532902

Always check your mowers mounting pattern against the product images before purchasing.

If you're maintaining a commercial zero-turn mower from Scag, Ferris, Simplicity, or Snapper, the Oregon 91-626 6-pack is a smart replacement option. These 21-inch blades are built to match OEM specs exactly, so you won't fight with alignment or vibration issues after installation. Landscapers and contractors who run multiple machines will especially appreciate the convenience and cost savings of buying six blades at once.

Real-world performance is where these blades shine. The high-grade steel holds an edge longer than cheaper aftermarket alternatives, and the one-inch air lift helps discharge clippings evenly instead of leaving windrows. In my experience, Oregon blades cut cleanly through thick, damp grass without bogging down the engine, and they resist bending when you accidentally hit a rock or root. That durability matters when you're on a tight schedule and can't afford downtime.

Build quality is consistent across all six blades. The 0.203-inch thickness and 5/8-inch arbor hole fit snugly on spindles, and the balance is solid straight out of the box. For pros who swap blades frequently, the included count means you can pre-sharpen a few sets or rotate them across different mowers. Homeowners with large properties will also find this pack useful if they prefer to replace blades seasonally rather than sharpen.

A realistic drawback is compatibility: these blades only fit specific deck configurations (60-inch and similar with 21-inch blades). Always double-check your mower's part number against the list in the description. If you own a smaller push mower or a standard lawn tractor, these won't work. Also, while the steel is tough, you'll still need to sharpen after heavy use in abrasive conditions.

Overall, the Oregon 91-626 6-pack delivers professional-grade replacement blades at a competitive price. For anyone maintaining a Scag, Ferris, Simplicity, or compatible mower, this is a reliable, no-hassle choice that keeps your cut looking sharp all season.

Blade Length: 21 inches
Blade Width: 2.50 inches
Blade Thickness: 0.203 inches
Center Hole Size: 5/8 inch
Air Lift: 1 inch
Quantity: 6 blades per pack
Replaces OEM: Scag 48111, 481708, Ferris 5020842, 5101755, Simplicity 5022808ASM, Snapper 17081, and more (see product description).

The Oregon Gator G3 mulching blades are a top-tier replacement option for 46 inch deck mowers. Built for homeowners, landscapers, and light commercial use, these 22-7/8 inch blades bring serious mulching performance to your mower. The exclusive Gator Mulcher design uses a patented blade angle and notches to create a vortex that recuts clippings into fine particles that decompose quickly. This means less time bagging and a healthier lawn.

In real-world use, these blades excel in wet grass, dry leaves, and even sandy conditions. The high-lift angle pushes debris up and out whether you’re side discharging or bagging. The 0.187 inch thick steel resists bending when you hit a hidden rock or root, and the heat treatment keeps the cutting edge sharp longer. You’ll notice a cleaner cut and less clumping, even on thick St. Augustine or Bermuda grass.

Installation is straightforward if you have the right tools. The 5-point star center hole fits most standard spindles, but you should check your mower’s specific mounting pattern. The blades come as a pair, so you can replace both at once. Balancing them before install is recommended to avoid vibration. Once on, they run smooth and quiet compared to generic blades.

Build quality is exactly what you’d expect from Oregon. The steel is heat-treated, and the finishing process adds corrosion resistance. The 26-point quality checklist ensures each blade meets strict standards for balance, hardness, and toughness. These are not cheap blades, but they outlast lower-cost options by a wide margin.

On the downside, they are very sharp out of the box, so handle with care. Also, if your mower uses a different center hole shape (like a round hole with an adapter), you may need to verify fitment. Some users have reported needing to file the mounting slot slightly for a perfect fit on older models. But overall, for any serious lawn care enthusiast or contractor who wants to reduce bagging time, the Oregon Gator G3 is a smart investment. They deliver professional-grade mulching without the premium price tag of OEM blades.

The 8TEN LawnRAZOR toothed mulching blade set is a heavy-duty upgrade for anyone running a 61-inch mower deck. These blades are designed to handle the toughest mowing conditions, from overgrown fields to thick, weedy lawns. The toothed edge acts like a series of small cutters, repeatedly slicing grass into fine particles that break down quickly and feed the soil. If you maintain large properties or commercial accounts, this set can save you time and deliver a cleaner finish than standard blades.

This 3-pack is built for commercial-grade use. Each blade measures 21 inches long, 2.5 inches wide, and 0.203 inches thick, with a 5/8-inch center hole. The thickness alone sets it apart from thinner blades that can bend or dull fast. The powder coat finish resists corrosion, which is a real plus if you store your mower in a damp shed or wash it frequently. Compatibility is broad, covering Scag, Ferris, Husqvarna, Hustler, Great Dane, and many others. Just double-check your deck size and spindle pattern before ordering.

In real-world use, these blades shine in dry to moderately dry grass. They mulch aggressively, leaving a fine carpet of clippings that disappear into the lawn. The toothed design does create more dust in sandy soil, so keep that in mind if you mow near gravel or dirt. In wet conditions, the fine clippings can clump and stick to the deck, requiring a quick rinse. For most users, that trade-off is worth the superior mulching power.

Build quality is solid. The blades are balanced from the factory, and we noticed minimal vibration during testing. They hold an edge reasonably well, but like any mulching blade, they will dull faster than a standard lift blade if you hit rocks or roots. The 3-pack is a smart buy for anyone with multiple mowers or a single machine that sees heavy use. You'll have spares ready when you need them.

Overall, the 8TEN LawnRAZOR toothed mulching blade set delivers on its promise. It's not a universal solution, but for dry, thick grass on a 61-inch deck, it's one of the best options. Professional landscapers and dedicated homeowners who want a clean, fine mulch will appreciate the performance. Just avoid using it in wet grass, and you'll get great results.

Length: 21 inches

Width: 2.5 inches

Thickness: 0.203 inches

Center Hole: 5/8 inches

Deck Size: 61 inches

Pack Quantity: 3 blades

Blade Type: Toothed mulching

Finish: High-temp green powder coat

Weight: 7.8 pounds (set)

Replaces OEM part numbers: 482879, 112111-03, 112243-03, 42180B, 823006, 1520842, 5020842, 539101733, 539102093, 794859, 101733, 050170, 050256, 5070, 51532, 48111, 481708, 481712, 48304, 1892324, 7017081, 7075770, 7075770YP

Fits brands: Bobcat, Encore, Ferris, Great Dane, Husqvarna, Hustler, Lesco, Scag, Snapper, Wright, AYP, Craftsman, Poulan, Redmax

Fits models: iZ6123, iZ6125, LZ6123, LZ6125, and many more 61-inch deck mowers

The GICOOL 91-626 replacement mower blade set is a heavy-duty pack of high-lift cutting blades engineered specifically for commercial-style 61-inch zero-turn mowers. Designed to fit equipment from well-known brands such as Scag, Ferris, and Bobcat, this pack is tailored for rural property owners, acreage managers, and landscaping contractors who demand consistent lawn grooming across sprawling acreage. With two full deck swaps included in a single package, users can rotate sharpened sets without interrupting their busy mowing schedules.

Constructed from 40MnB hardened alloy steel, these blades measure 21 inches in length, 2-1/2 inches in width, and boast a substantial 13/64-inch (5 mm) thickness. This heavy gauge metal provides reliable resistance against bending, warping, or premature edge chipping when navigating dense turf, hidden roots, or minor debris on country lawns. A factory-applied dark protective coating keeps rust at bay during seasonal shelf storage and helps guard hands against nicking while handling blades underneath the mower deck.

Cutting performance relies heavily on the 1-inch high-lift wing profile, which creates a powerful updraft inside the 61-inch cutting chamber. This suction pulls bent and flattened grass blades upright right before the 7-13/64-inch cutting edge slices through, yielding a clean, manicured finish before backyard cookouts or weekend gatherings. The strong airflow also excels at propelling damp spring clippings out through the side discharge chute or driving volume into high-capacity commercial collection bagging systems with reduced risk of deck clogging.

Installation follows standard deck maintenance routines thanks to the precision 5/8-inch circular center hole, sliding onto matching spindles with ease. Homeowners and maintenance crews will want to verify deck clearance and torque specifications on their spindle bolts before tightening. While the aggressive lift provides superior bagging and discharge, it may stir up fine dust in arid conditions or require slightly more engine power in overgrown fields. The black coating on the bevel naturally wears away after the first mowing session, though users aiming for golf-course precision may choose to hone the cutting bevel with a bench grinder before initial use.

For owners of heavy-duty 61-inch zero-turn riders looking to maintain expansive properties without overpaying for OEM-branded replacement iron, this 6-pack offers substantial utility and long-term value. Having a second matching set waiting in the workshop makes mid-season blade changes painless after accidental encounters with rocks or tough roots, keeping your lawn looking pristine from early spring through late autumn leaf cleanup.

Commercial zero-turn mowers place intense mechanical stress on cutting components, making material composition vital. These GICOOL blades utilize 40MnB steel, a boron-alloyed manganese steel recognized for superior hardness, wear resistance, and structural integrity under impact.

At 13/64 inches (5 mm) thick, these blades resist the cupping and warping that thinner aftermarket alternatives often experience over rough, uneven turf. The heavy steel backbone helps absorb vibration at high tip speeds, protecting deck spindle bearings from premature wear during long mowing shifts.

Routine blade maintenance is essential for lawn health, as clean cuts seal grass tips quickly and prevent brown, jagged edges. This 6-pack allows lawn owners to keep three freshly sharpened, balanced blades on their machine while maintaining a spare set on the workbench.

Before mounting, always disconnect the mower spark plug wires and wear heavy work gloves. Ensure the 5/8-inch center hole seats flush against the spindle shaft, verify that the lift wing points upward toward the underside of the deck, and torque all spindle hardware to the manufacturer recommended foot-pound specifications.