There is nothing more frustrating than a mower that tears grass instead of cutting it cleanly. If your 21 inch ryobi lawn mower blade is showing signs of wear, you are likely dealing with ragged tips, poor suction, or excessive vibration. These issues often stem from a dull edge or a blade that no longer fits the spindle correctly. Replacing the blade is a simple fix that can restore the performance of your push mower. The right replacement ensures consistent cutting and protects your engine from bogging down in thick turf. You want a blade that matches your specific deck geometry to avoid costly spindle damage. This guide helps you identify the correct fit for your machine.
Choosing the correct replacement involves more than just checking the length. You must verify the center hole shape, outer hole spacing, and blade thickness. A mismatch in these dimensions can lead to poor balance and uneven cuts. Many homeowners prefer metal mower blade setup essentials to ensure proper installation. The options listed here cover popular models from MTD, Cub Cadet, and Ryobi. Each blade is designed to replace specific OEM parts, ensuring a secure fit. By matching these specifications, you can avoid the common problem of stripped bolts. This attention to detail makes a significant difference in long-term durability.
Pros
- Sharp out of the box - cuts cleanly on the first pass without needing to sharpen.
- Fits a wide range of popular mower brands and models, reducing guesswork.
- Solid build quality from a US-based manufacturer with a reputation for reliable parts.
- Mulches grass into fine particles that decompose quickly, reducing thatch buildup.
- Very affordable compared to OEM blades, especially for the performance you get.
Cons
- The powder coating may flake off initially, which is normal but can be messy.
- Not compatible with all 21-inch mowers - always verify your OEM part number before ordering.
- Some users report that the blade is slightly thinner than OEM, though it still holds up well under normal use.
The MaxPower 331528B is a replacement mulching blade designed for many 21-inch cut walk-behind mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. If you've got a push mower that uses a bow tie center hole pattern with a 5/16-inch hole and 2.5-inch spacing, this blade is likely a direct drop-in. It replaces a long list of OEM numbers including 742-0741, 942-0741, and Craftsman's CMXGZAM100067, so compatibility is broad. This isn't a power tool in the traditional sense, but it's a critical component for anyone maintaining a lawn mower.
This blade is best suited for homeowners, DIYers, and weekend warriors who want to keep their lawn looking sharp without spending a fortune. It's also a solid pick for rental property owners or small landscaping crews who need a reliable, cost-effective replacement for a fleet of mowers. The mulching design chops grass clippings into fine pieces that settle into the turf, returning nutrients to the soil. That means less bagging and a healthier lawn overall.
In real-world use, the blade comes factory-sharpened and coated with a protective powder. The first cut will strip that coating away, revealing a keen edge that slices through grass cleanly. Users report a smooth, even cut with minimal tearing, which reduces stress on the grass and helps prevent browning. The heat-treated steel holds its edge well through a full season of weekly mowing, though you may want to touch it up with a file if you hit rocks or roots. Installation is straightforward: remove the center bolt, swap blades, and torque it back down. A block of wood wedged between the blade and the deck makes the job easier.
Build quality is solid for an aftermarket blade. MaxPower manufactures these in the USA (Glennville, GA and Phoenix, AZ) using a heat-treat process that meets or exceeds OEM specs. The steel feels appropriately stiff, and the bow tie center hole fits snugly on the spindle without wobble. One minor annoyance: the powder coating can flake off during the first few cuts, leaving little black specks on your lawn. That's cosmetic and harmless, but worth noting. Also, because this is a universal replacement, you absolutely must check your mower's OEM part number before buying. The listing includes a huge list of compatible models, but a mismatch could mean the blade doesn't fit or spins off-balance.
Overall, the MaxPower 331528B is a smart buy for anyone needing a reliable mulching blade at a budget-friendly price. It cuts well, fits a wide range of mowers, and is built to last. The only real drawback is the need to verify compatibility, but that's true for any universal blade. If you're tired of paying OEM prices for the same performance, this is a great alternative. Just double-check your part number, and you'll be back to mowing in no time.
Blade Length: 21 inches
Blade Width: 2.25 inches
Center Hole: Bow tie pattern, 5/16-inch diameter outer holes, 2.5-inch center-to-center spacing
Weight: 1.6 pounds
Material: Heat-treated steel
Finish: Powder-coated (wears off on first use)
Manufacturer: MaxPower (USA-made in Glennville, GA and Phoenix, AZ)
Model Number: 331528B
Replaces OEM Numbers: 742-0741, 742-0741A, 742-04276, 742-04276S, 942-0641, 942-0741, 942-0741A, 942-04276, 942-04276S, CC-742-0741, Craftsman CMXGZAM100067
This blade fits many 21-inch cut mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. Always verify your mower's OEM blade part number matches one of the numbers listed above. Common compatible models include:
Cub Cadet: CC 46M, CC 46MZ, CC 46ES, CC 439, CC 469, CC 949, CC 94M, CC 98M, CC 98H, CC 98K, CC 99M, CC 989, CC 997ES, CC 999ES; SC 100, SC 100 H, SC 100 HW, SC 300, SC 300 E, SC 300e, SC 300 HW, SC 500 EZ, SC 500 EQ, SC 500 HW, SC 500 Z, SC 700E, SC 700 H; S 621, S 621 SS, SR 621, SRC 621, SRE 621, SC 621, SC 621 E; MTD 214 IP, 214 KW, PR 521.
Troy-Bilt: TB 105, TB 110, TB 115, TB 120, TB 125, TB 130, TB 130 XP, TB 140, TB 160, TB 160 XP, TB 200, TB 210, TB 220, TB 230, TB 240, TB 270 ES, TB 270 XP, TB 280 ES, TB 290 ES, TB 320, TB 330, TB 360, TB 360 ES, TB 370, TB 370 XP, TB 380 ES, TB 380 XP, TB 400 XP, TB 430 XP, TB 450 XP, TB449E, TB 490 XP; Tru-Cut 100, 110; Tuff Cut 200, 210, 220, 230; Pro-Cut 300, 310, 320.
Craftsman: Models using OEM part CMXGZAM100067 (check your mower's manual or existing blade for the number).
Pros
- Precision fit for popular MTD and Ryobi walk-behind mowers using bow-tie spindles
- Thick, high-grade steel resists gouging and dulling from hidden yard twigs and soil
- Superior mulching action reduces visible grass clumps across the yard
- Straightforward bolt-on installation makes seasonal DIY maintenance easy
Cons
- Requires careful inspection of mower spindle pattern because it only fits bow-tie mounts
- Not intended for non-MTD platform mowers or decks larger than 21 inches
The Oregon 21-Inch Lawn Mower Blade is a heavy-duty replacement cutting blade engineered to restore optimal slicing and mulching performance to aging walk-behind mowers. Lawn mower blades endure tremendous punishment from sand, hidden sticks, and overgrown grass, gradually losing the crisp edge needed for a pristine cut. Designed as a direct swap for factory equipment, this blade offers suburban homeowners, rental property managers, and budget-conscious DIYers a dependable way to revive their mower without spending extra on branded original parts.
Cutting performance plays a vital role in lawn health. When an old blade becomes dull or bent, it tears grass blades rather than slicing them cleanly, resulting in brown, frayed tips that leave the lawn vulnerable to disease and summer heat stress. This Oregon replacement features an aggressive mulching contour that lifts grass upright before cutting and then repeatedly recuts the clippings under the deck. The resulting fine mulch settles back into the turf canopy, decomposing rapidly to return moisture and nitrogen to the soil while saving homeowners from constantly emptying a heavy grass catcher bag.
Build quality centers around tough 0.134-inch thick steel paired with Oregon's long-standing manufacturing standards. Measuring 21.75 inches in overall length with a 2.25-inch width, it provides rigid support that resists flexing under tall or damp turf conditions. The blade features a precision bow-tie center mount hole with two 5/16-inch outer alignment holes spaced 2-1/2 inches apart. This specific configuration matches widely used MTD and Ryobi walk-behind push and self-propelled mower decks, ensuring balanced rotation that prevents excess vibration and protects engine components.
Installation is straightforward for anyone familiar with basic home maintenance tools. Swapping out a worn blade involves disconnecting the spark plug boot for safety, propping or blocking the deck, and removing the central retaining bolt with a standard socket wrench. Because the blade is factory balanced, it seats cleanly against the bow-tie spindle adapter without awkward wobbling. Keeping an extra blade on hand allows homeowners to swap out a dull edge immediately during the busy spring growing season rather than delaying their weekend yard cleanup.
A realistic limitation of this blade is its strict compatibility profile. It is engineered specifically for mower decks built on the MTD platform using the bow-tie spindle pattern, meaning it will not fit mowers with round, star-shaped, or triangular center holes. Homeowners should verify their mower model number and spindle style before ordering. For anyone running an eligible MTD or Ryobi 21-inch mower, this replacement blade provides an economical, durable, and practical upgrade that keeps your grass looking neatly manicured all season long.
Verifying deck size and spindle shape is essential prior to replacing any mower blade. This Oregon replacement blade is built specifically for 21-inch decks that utilize a bow-tie shaped center spindle mount, accompanied by 5/16-inch diameter outer alignment holes set at a 2-1/2 inch center-to-center spread.
Based on manufacturer specifications, this blade directly replaces OEM part numbers MTD 942-0741, 942-0741A, 742-0741, and 742-0741A. It fits numerous walk-behind models including MTD 11A-A0S5700, 11A-A1S5700, 11A-A2S5700, 11A-B0BL729, 11A-B0BL765, 11A-B0S5700, 11A-B1BE729, 11A-B2BN704, and 11A-B9A9729, as well as Ryobi models 11A-545734, 11A-545D034, 11A-546P034, and 12A-568Q034.
To ensure proper fit, tilt your mower backward with the air filter and carburetor pointing upward, remove the existing blade, and confirm that the center mounting hole matches the distinct bow-tie shape rather than a circular or star opening.
Installing a replacement blade is one of the easiest ways to improve mowing efficiency. Always disconnect the spark plug wire before beginning any maintenance to prevent accidental starting. Use a sturdy block of scrap wood between the blade and the inner deck wall to keep the blade from turning while loosening the center mounting bolt with a socket wrench.
Ensure the cutting wings point upward toward the underside of the mower deck during installation. Tighten the mounting bolt to your manufacturer recommended torque specification, ensuring the bow-tie cutout sits flush against the spindle adapter hub.
For optimal cutting performance and turf health, inspect the cutting edges periodically throughout the mowing season. Clearing away dried grass buildup beneath the deck will maximize air circulation, allowing the blade's mulching sails to lift and recut grass clippings effectively.
Pros
- Sturdy steel construction holds an edge well for multiple mowing sessions
- Excellent mulching action reduces bagging frequency and returns nutrients to the yard
- Broad compatibility with common mower brands and specific OEM part numbers simplifies replacement
Cons
- Requires careful verification of mower model and blade dimensions before purchase to ensure proper fit
- No customer reviews yet, so long-term wear performance is unconfirmed based on real-world use
The Oregon 21-inch lawn mower blade is a straightforward replacement part designed to upgrade your mower's cutting and mulching ability. It's not a power tool itself, but it's an essential consumable for anyone maintaining a lawn with a 21-inch deck mower. This blade is best suited for DIY homeowners and garden enthusiasts who want to improve their mower's performance without buying a whole new machine.
In real-world use, the blade's high-quality steel construction helps it stay sharper longer than many budget blades. That means cleaner cuts on grass and less tearing, which can lead to a healthier lawn. The mulching design is the standout feature; it recuts clippings multiple times before depositing them as fine mulch. This reduces the need for bagging and helps feed your yard naturally. I've seen similar Oregon blades work well on standard residential lawns, giving a neat finish even in thicker grass.
Build quality feels solid for the price point. The blade thickness (0.134 inches) and width (2.25 inches) provide decent rigidity without being overly heavy. Installation is straightforward if you've swapped a blade before, but be sure to follow the torque specs in your mower manual. One realistic limitation is that fitment depends heavily on exact dimensions and hole spacing; double-checking your mower's manual and the included OEM part number list is a must. There are no customer reviews yet, so long-term durability is based on Oregon's reputation rather than hands-on reports.
Overall, the Oregon 21-inch blade is a reliable, performance-focused upgrade for compatible mowers. It's a practical choice for homeowners who want better mulching without hassle. If your Craftsman, Husqvarna, or AYP mower matches the specs, you can expect cleaner cutting and less time spent emptying the bag.
Color: Black
Dimensions: 21.75 x 2.6 x 1.13 inches
Product Group: Lawn & Patio
Binding: Lawn & Patio
Replaces OEM part numbers: 165833, 175064, 189028, 406712, 176135, 159267, 008020, 175052, 406706, 406712X431, 531300765, 532 15 92-67, 532 17 50-52, 532159267, 532165833, 532175064, 532176135, 532189028, 532406712, 539111878, PP23020, and Craftsman CMXGZAM100129.
Fits most 21-inch deck mowers from Craftsman, AYP, Husqvarna, and others. Verify blade length (21"), center hole (5/8"), outer holes (3/8"), and center-to-center distance (1-7/8").
Pros
- Exact fit replacement for multiple popular Ryobi 40V 21-inch walk-behind mower models
- Clean cutting action protects turf health and prevents ragged grass edges
- Helps preserve cordless battery efficiency by reducing motor drag during mowing
- Budget-friendly alternative to expensive factory OEM replacement blades
Cons
- Requires verifying specific Ryobi model compatibility prior to installation
- Standard blade design rather than a high-lift or multi-blade mulching configuration
- Requires basic hand tools and protective work gloves for blade removal and installation
The Stens 310-020 is an aftermarket replacement standard 21-inch lawn mower blade engineered to replace original equipment parts on select Ryobi 40V cordless electric walk-behind mowers. Specifically matching OEM part numbers 682534 and AC04025, this blade provides a direct replacement for popular Ryobi models like the RY401150US, RY401140US, RY401200, and RY4011060US. For suburban homeowners and DIY lawn care enthusiasts who rely on battery-powered outdoor equipment for routine yard upkeep, having a fresh, well-balanced blade is essential for keeping grass healthy and green.
This replacement blade is ideally suited for everyday suburban property owners, budget-conscious consumers, and eco-friendly mower owners who want to maintain crisp cutting performance without paying dealership markups. Over time, hitting hidden rocks, tree roots, or buried sprinkler heads inevitably dulls and nicks a mower blade. Instead of running a worn blade that tears grass blades and leaves unsightly brown tips across the front lawn, this standard blade restores clean slicing action for Saturday morning mowing sessions and quick pre-barbecue yard touch-ups.
Cutting performance directly impacts both lawn health and battery efficiency on cordless electric mowers. Measuring 21 inches in length, 2 inches in width, and 0.105 inches in thickness, the Stens blade delivers the correct balance and aerodynamics needed for Ryobi electric decks. Because dull or unbalanced blades force electric motors to draw more power, installing a sharp replacement helps preserve battery runtime, allowing homeowners to complete standard residential lots on a single charge while supporting smooth mulching and dependable bagging into the rear grass catcher.
The build quality reflects practical engineering with sturdy steel construction designed to handle normal grass cutting, seasonal leaf mulching, and light yard debris. The blade features a 7/8-inch center hole paired with a 3 7/16-inch center-to-center hole spacing, ensuring a snug and secure fit over the factory blade hub. Replacing the blade is a quick DIY project that requires only basic hand tools, a block of wood to secure the blade, and heavy work gloves for safety before loosening the mounting hardware.
While this blade serves as an exact dimensional match for specified Ryobi 21-inch mowers, it is a standard profile blade rather than a high-lift or commercial mulching contour. Homeowners should confirm their specific Ryobi model number and deck size prior to purchasing to guarantee full compatibility. For owners of compatible Ryobi 40V mowers looking for an affordable, reliable way to refresh their grass cutting performance for the spring and summer mowing season, the Stens 310-020 offers dependable value and clean cutting results.
Replacing a worn lawn mower blade on a cordless mower is simple when following standard safety practices. Always disconnect the 40V battery pack before tilting the mower deck to prevent any accidental motor engagement during maintenance. Position the mower on a flat, clean surface such as a driveway or garage floor with the deck tilted up securely.
Use a thick pair of leather work gloves to protect your hands, and wedge a block of scrap wood between the blade and the inner deck wall to keep the blade from spinning. Using a socket wrench, loosen the center bolt according to your Ryobi owner manual specifications, inspect the blade adapter for debris, and install the Stens replacement with the cutting edge oriented in the correct rotational direction.
Frequently Asked Questions
How do I verify the correct center hole fit?
Always check your owner’s manual for the specific hole pattern. Most 21-inch blades use a bow-tie or star design. The center-to-center distance must match your spindle exactly. A mismatch can cause severe vibration and damage to your mower deck bearings.
What is the difference between mulching and standard blades?
Mulching blades have serrated edges that recut clippings into fine particles. Standard blades are designed for side discharge or bagging. Mulching blades create more suction to keep debris under the deck. This reduces the need for frequent bag emptying during your mowing session.
Can I use a blade from a different brand?
Yes, if the dimensions and OEM numbers match perfectly. Cross-reference the blade length, hole spacing, and thickness with your current part. Many aftermarket brands like Oregon and Stens offer compatible replacements. Ensure the steel gauge is similar to maintain proper balance and cutting efficiency.
How often should I sharpen or replace my blade?
Inspect your blade after every few mowing sessions for nicks or dullness. A dull blade tears grass, leading to brown tips and disease. You can sharpen the edge if it is not bent. Replace the blade immediately if it shows cracks or significant bending.
Is it difficult to install a new mower blade?
Installation is straightforward if you follow safety guidelines. Disconnect the spark plug wire before starting the work. Use a proper wrench to remove the old blade and install the new one. Check the guide for stuck bolts if the nut is seized tight.


Write Your Review
No reviews yet. Be the first to share your experience!