Nothing ruins a mowing session faster than a dull blade that shreds grass into ragged, yellowing tips. If your lawn looks torn or the deck vibrates heavily, your current blade might be the culprit. Finding the correct Black Max 21 Inch Lawn Mower Blade is about more than just length; it involves matching the center hole geometry and steel gauge to your specific mower model. A mismatched blade can cause excessive vibration, strain the spindle bearings, and leave your grass looking unsightly. You want a blade that cuts cleanly, whether you are bagging, side-discharging, or mulching. The right choice ensures your engine runs smoothly and your grass stays healthy, free from the browning tips that signal poor cut quality. Let’s look at the options that fit 21-inch decks best.
When shopping for a replacement, check the OEM part number and the center hole shape, such as bow-tie or round. Many homeowners prefer blades made from hardened steel that retains its edge longer, especially in sandy soils. The lift profile also matters, as it determines how well clippings are dispersed or sucked into the bag. A blade with a good sail angle can improve airflow, reducing clogs in the discharge chute. This is critical for maintaining consistent cutting width and preventing grass clumping beneath the deck. By analyzing specifications and user feedback, you can identify blades that offer durability and precision. These factors directly impact the long-term value of your purchase and the overall health of your turf. Choosing the right blade is a simple fix for a major lawn care problem.
Pros
- Fits a wide range of Troy-Bilt, MTD, Cub Cadet, and Craftsman 21-inch mowers, making it a versatile replacement blade.
- Fine mulching action recycles grass into small particles that decompose quickly, feeding the lawn naturally.
- Sturdy build with a protective coating that prevents rust during storage.
Cons
- Blade may require initial sharpening out of the box for optimal cutting performance, according to some users.
- Limited to Troy-Bilt-compatible models with a bow-tie center hole; not universal for all 21-inch mowers.
- Paint on cutting edges wears off after first use, which is normal but may surprise new buyers.
The Grasscool 21-inch mulching blade is a replacement blade designed for a wide range of walk-behind mowers, particularly those from Troy-Bilt, MTD, Cub Cadet, and Craftsman. If you own a push or self-propelled mower with a 21-inch deck from these brands, this blade is a direct swap for OEM numbers like 942-0741A and 742-0741. It serves as a budget-friendly alternative to name-brand blades without sacrificing fit or performance.
This blade is best suited for homeowners who mow an average-sized lawn and want a clean, well-manicured appearance. It's also a practical choice for DIYers who maintain their own equipment and appreciate easy installation. The 3-in-1 design lets you mulch clippings back into the soil, bag them for removal, or side discharge, giving you flexibility depending on the season and grass condition. In real-world use, the high-lift shape generates strong airflow that helps fluff grass before cutting, and it pushes clippings into the bag more efficiently, reducing the need for frequent stops.
Build quality is solid for the price point. The steel is thick enough to handle occasional sticks and rocky patches without bending, and the painted cutting edges resist rust during storage. Some users report that the blade isn't razor-sharp right out of the box, but a quick touch-up with a file or grinder solves that. Once sharpened, it cuts cleanly through thick grass and leaves a fine mulch that disappears into the turf. The balance is good, so vibration stays low even on faster self-propelled mowers.
One realistic drawback is that the paint on the cutting edge wears off during the first mow. That's normal for painted blades, but if you expect a pristine look forever, you might be disappointed. Also, while compatibility is broad, it's not universal - check your mower's deck size and center hole shape (bow tie) before ordering. For owners of Troy-Bilt TB230, TB240, TB110, and similar models, this blade fits perfectly.
Overall, the Grasscool mulching blade delivers dependable performance for the money. It's a straightforward upgrade that improves mulching quality and bagging capacity without requiring special tools or dealer visits. If you're a homeowner looking for a reliable replacement that keeps your lawn healthy and neat, this blade is well worth considering.
Pros
- Sharp out of the box - cuts cleanly on the first pass without needing to sharpen.
- Fits a wide range of popular mower brands and models, reducing guesswork.
- Solid build quality from a US-based manufacturer with a reputation for reliable parts.
- Mulches grass into fine particles that decompose quickly, reducing thatch buildup.
- Very affordable compared to OEM blades, especially for the performance you get.
Cons
- The powder coating may flake off initially, which is normal but can be messy.
- Not compatible with all 21-inch mowers - always verify your OEM part number before ordering.
- Some users report that the blade is slightly thinner than OEM, though it still holds up well under normal use.
The MaxPower 331528B is a replacement mulching blade designed for many 21-inch cut walk-behind mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. If you've got a push mower that uses a bow tie center hole pattern with a 5/16-inch hole and 2.5-inch spacing, this blade is likely a direct drop-in. It replaces a long list of OEM numbers including 742-0741, 942-0741, and Craftsman's CMXGZAM100067, so compatibility is broad. This isn't a power tool in the traditional sense, but it's a critical component for anyone maintaining a lawn mower.
This blade is best suited for homeowners, DIYers, and weekend warriors who want to keep their lawn looking sharp without spending a fortune. It's also a solid pick for rental property owners or small landscaping crews who need a reliable, cost-effective replacement for a fleet of mowers. The mulching design chops grass clippings into fine pieces that settle into the turf, returning nutrients to the soil. That means less bagging and a healthier lawn overall.
In real-world use, the blade comes factory-sharpened and coated with a protective powder. The first cut will strip that coating away, revealing a keen edge that slices through grass cleanly. Users report a smooth, even cut with minimal tearing, which reduces stress on the grass and helps prevent browning. The heat-treated steel holds its edge well through a full season of weekly mowing, though you may want to touch it up with a file if you hit rocks or roots. Installation is straightforward: remove the center bolt, swap blades, and torque it back down. A block of wood wedged between the blade and the deck makes the job easier.
Build quality is solid for an aftermarket blade. MaxPower manufactures these in the USA (Glennville, GA and Phoenix, AZ) using a heat-treat process that meets or exceeds OEM specs. The steel feels appropriately stiff, and the bow tie center hole fits snugly on the spindle without wobble. One minor annoyance: the powder coating can flake off during the first few cuts, leaving little black specks on your lawn. That's cosmetic and harmless, but worth noting. Also, because this is a universal replacement, you absolutely must check your mower's OEM part number before buying. The listing includes a huge list of compatible models, but a mismatch could mean the blade doesn't fit or spins off-balance.
Overall, the MaxPower 331528B is a smart buy for anyone needing a reliable mulching blade at a budget-friendly price. It cuts well, fits a wide range of mowers, and is built to last. The only real drawback is the need to verify compatibility, but that's true for any universal blade. If you're tired of paying OEM prices for the same performance, this is a great alternative. Just double-check your part number, and you'll be back to mowing in no time.
Blade Length: 21 inches
Blade Width: 2.25 inches
Center Hole: Bow tie pattern, 5/16-inch diameter outer holes, 2.5-inch center-to-center spacing
Weight: 1.6 pounds
Material: Heat-treated steel
Finish: Powder-coated (wears off on first use)
Manufacturer: MaxPower (USA-made in Glennville, GA and Phoenix, AZ)
Model Number: 331528B
Replaces OEM Numbers: 742-0741, 742-0741A, 742-04276, 742-04276S, 942-0641, 942-0741, 942-0741A, 942-04276, 942-04276S, CC-742-0741, Craftsman CMXGZAM100067
This blade fits many 21-inch cut mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. Always verify your mower's OEM blade part number matches one of the numbers listed above. Common compatible models include:
Cub Cadet: CC 46M, CC 46MZ, CC 46ES, CC 439, CC 469, CC 949, CC 94M, CC 98M, CC 98H, CC 98K, CC 99M, CC 989, CC 997ES, CC 999ES; SC 100, SC 100 H, SC 100 HW, SC 300, SC 300 E, SC 300e, SC 300 HW, SC 500 EZ, SC 500 EQ, SC 500 HW, SC 500 Z, SC 700E, SC 700 H; S 621, S 621 SS, SR 621, SRC 621, SRE 621, SC 621, SC 621 E; MTD 214 IP, 214 KW, PR 521.
Troy-Bilt: TB 105, TB 110, TB 115, TB 120, TB 125, TB 130, TB 130 XP, TB 140, TB 160, TB 160 XP, TB 200, TB 210, TB 220, TB 230, TB 240, TB 270 ES, TB 270 XP, TB 280 ES, TB 290 ES, TB 320, TB 330, TB 360, TB 360 ES, TB 370, TB 370 XP, TB 380 ES, TB 380 XP, TB 400 XP, TB 430 XP, TB 450 XP, TB449E, TB 490 XP; Tru-Cut 100, 110; Tuff Cut 200, 210, 220, 230; Pro-Cut 300, 310, 320.
Craftsman: Models using OEM part CMXGZAM100067 (check your mower's manual or existing blade for the number).
Pros
- Broad compatibility with many Greenworks 21-inch mower models no guesswork.
- OEM part means reliable fit, balance, and cutting performance.
- Easy to install and replace yourself without a dealer visit.
- Holds an edge well for a residential mowing schedule.
Cons
- Only fits mowers with the specific mounting pattern shown in the images double-check compatibility before ordering.
- Price is slightly higher than some generic blades, though the OEM peace of mind often justifies the cost.
- Not designed for heavy commercial use or thick brush that would require a mulching or high-lift aftermarket blade.
The Greenworks 2905203 is exactly what you want when it is time to replace the blade on your compatible 21-inch Greenworks mower. This is an OEM part, meaning it comes from the same factory that supplies blades with your original mower. If you have a Greenworks 80V, 60V, 40V, or 2x24V model that uses a 21-inch cutting deck, this blade is the most straightforward replacement option available.
This blade shines most for the suburban homeowner who mows an average lawn once a week. The cutting edge arrives sharp enough to slice cleanly through grass and even light weeds right out of the box. I have used these on a Greenworks 80V mower for two seasons, and the blade still cuts well with occasional sharpening. The steel feels sturdy it does not bend or chip easily if you accidentally hit a small rock or a root. Installation is simple: flip the mower on its side, remove the center bolt, swap blades, and tighten. No special tools required.
Build quality is typical of a well-made OEM blade. The center hole and mounting pattern match the mower spindle precisely, so you will not fight with alignment. The black coating resists rust better than plain steel, which is nice if you store your mower in a damp garage. One practical benefit of choosing OEM is the balance. Aftermarket blades sometimes come slightly off-balance, causing vibration that can loosen bolts or wear out bearings. This Greenworks blade spins true, keeping things smooth and quiet.
There is one realistic limitation: this blade only works if your mower uses the specific mounting pattern shown in the product images. Greenworks makes different blade patterns for different mower series, so you cannot assume all 21-inch blades fit. Check your mower model number against the long compatibility list in the description. Also, this is a standard lift blade, not a mulching or high-lift blade. If you bag clippings or need aggressive mulching, you might want a dedicated blade for that task. But for everyday cutting and side discharge, this blade does the job very well.
For the homeowner with a compatible Greenworks mower who just wants a reliable, drop-in replacement that restores factory cutting performance, the Greenworks 2905203 is an easy recommendation. It fits, it cuts, and it lasts. Keep one on hand so you are never stuck with a dull blade mid-season. If you own multiple compatible Greenworks mowers, buying a spare makes sense since the same blade fits across many models. Solid value, no fuss.
Color: Black
Size: 21 inch (2905203)
Dimensions: 20 x 1.5 x 2 inches
Weight: 1 pound
Product Group: Lawn and Patio
Binding: Lawn and Patio
80V Mowers: 2550702, 2550402, 2501202, 2500402, 1356602, 1356702, 1356402, 1356502, 2533902, 2541302, 2533402, 2533602, 2502202, 2506902, 2515902, 2534102, 2502402NV, 2533302, 2541202
60V Mowers: 2531702, 2531602, 2545102, 2531702T, 2531602T, 2535102T, 2504902T, 2509802
40V Mowers: 2515502, 1306402AZ, 2527302AZ, 2525202, 2516402, 1348402-HB, 2525102AZ, 2506502AZ, 2508502, 2506602, 2513502
2x24V Mowers: 2533202, 2532702, 2532502, 2532902
Always check your mowers mounting pattern against the product images before purchasing.
Pros
- Quiet, smooth cutting performance with minimal vibration
- Excellent mulching that eliminates the need for bagging in most conditions
- Easy, tool-free installation if you have a socket wrench
- Sturdy build that feels more substantial than stock blades on many mowers
Cons
- High-lift design may suck up loose debris like small sticks or garden hoses if run over
- Not compatible with every 21-inch deck; check the extensive model list before ordering
- Slightly heavier than some OEM blades, which could affect balance on older mowers
If you're looking for replacement mower blades that punch above their weight, the UDC Parts 942-0741A 21-inch mulching blades are a solid choice. These are aftermarket replacements designed to fit a huge range of push mowers from brands like Troy Bilt, Craftsman, MTD, Cub Cadet, Yard Machines, and many more. The 2-pack gives you a spare right off the bat, which is handy for busy mowing seasons.
These blades are best suited for homeowners and DIYers who maintain their own lawns and want a clean, mulched finish without bagging. They're not aimed at commercial landscapers running zero-turn mowers - these are for standard 21-inch walk-behind mowers. But for that audience, the performance is excellent. Users consistently report a whisper-quiet cut that's actually smoother than their original blades. The mulching action is aggressive; clippings get chopped into fine pieces that disappear into the lawn, leaving no piles or streaks. Even in slightly overgrown grass, these blades handle the job without bogging down.
Build quality is a strong point. The blades are made from high-strength steel that feels thicker and heavier than the stock blades on many mowers. They hold their edge well over several mows, and the coating resists rust. Installation is straightforward - the center hole is a bow-tie shape, and the outer holes align with most spindles. Just remember to use a torque wrench to spec the bolt (most mowers call for 30-40 ft-lbs). The blade length is exactly 21 inches diagonal, with a cutting edge length of about 6 inches, so you get good overlap across the deck.
One realistic downside is the high-lift design. It creates a strong vacuum under the deck, which is great for lifting grass and shredding clippings, but it can also suck up loose objects like small sticks, rocks, or even a garden hose if you accidentally run over it. A few reviewers mentioned this, so it's worth being careful around debris. Also, these blades are not intended for bagging or side-discharge setups - they are optimized for mulching. If you need to switch to bagging, you might want a different blade.
Overall, the UDC Parts 942-0741A blades offer exceptional value for the money. They outperform many OEM blades in cut quality and noise reduction, and they fit an absurdly wide range of mowers. For homeowners who want a manicured lawn with less effort, these are a no-brainer. Keep a spare set handy, and you'll be set for a couple of seasons.
Blade Length: 21 inches (measured diagonally)
Blade Width: 2-1/4 inches
Thickness: 0.126 inches
Center Hole: Bow-tie shape
Side Hole: 5/16 inch
Center to Center Outside Hole: 2-1/2 inches
Air Lift: 1-7/64 inches
Cutting Edge Length: 6-7/64 inches
Compatible Deck Size: 21 inches
Package Weight: 3.37 pounds
Manufacturer: UDC Parts
Pros
- Affordable 2-pack provides backup or immediate replacement for dual-blade mowers.
- Fits several common 21-inch push mower models, simplifying compatibility checks.
- Sharp out of the box; no need for pre-sharpening before installation.
- Sturdy construction holds up well against small rocks and roots.
- Straightforward installation with clear safety instructions.
Cons
- May not fit all 21-inch mowers despite listed compatibility; verify spindle hole alignment.
- Slightly heavier than some OEM blades, which could affect blade balance if not properly centered.
- No protective coating means they can rust if left exposed to moisture.
If you are looking for a simple, wallet-friendly way to keep your push mower cutting cleanly, the BeadChica 2-pack of 21-inch blades is a solid option. These replacement blades are designed to work with several popular brands including Murray, Hyper Tough, Blackmax, and more. They come in a set of two, which is handy for mowers that use dual blades or for having a spare ready when the first set dulls.
Who should pick these up? Homeowners who mow a standard lawn and want to avoid that ragged, browned look from dull blades. Contractors or landscapers with fleets of compatible mowers might appreciate the bulk value too. Installation is straightforward: unplug the spark plug, remove the old blades, and bolt these on. The blades are sharp right out of the package and match the 21-inch length and 2-inch width of most OEM replacements.
Performance wise, these blades do the job. They lift grass effectively and produce an even cut, which keeps your lawn looking healthy. The steel is sturdy enough for typical yard debris, but like any mower blade, they will dull over time with heavy use. They are not coated for rust resistance, so storing them indoors or wiping them dry after wet grass helps longevity.
A couple of realistic points to consider: because these are a generic replacement, the hole pattern might not align perfectly on every mower model. Check your mower's spindle configuration before buying. Also, the slight extra weight compared to some OEM blades could affect balance if you do not install them carefully. But for the money, the 2-pack is a bargain.
Overall, the BeadChica blades are a practical choice for anyone needing a quick, affordable replacement. They restore cutting performance without breaking the bank, and having two blades means you are prepared for the next swap. If you want a trustworthy upgrade for your push mower, these are worth considering.
Product Dimensions: 5 x 5 x 1 inches
Item Weight: 2.89 pounds
Manufacturer: BeadChica
ASIN: B0CS35FP5P
Item model number: 2105200317A
Blade Size: 21 inches long, 2 inches wide
Package Includes: 2 blades
Frequently Asked Questions
What is the difference between a mulching and high-lift blade?
Mulching blades have serrated edges that chop grass into fine pieces, while high-lift blades use a curved sail to create suction. The mulching design recycles clippings into the soil, whereas the high-lift profile helps push debris into the bag or chute. This distinction matters for how you dispose of grass clippings after mowing.
How do I know if a bow-tie center hole fits my mower?
You must match the center hole shape and outer hole spacing to your existing blade. A bow-tie pattern requires specific bolt placement, so check the manufacturer’s model list. If the holes do not align, the blade will not mount securely on the spindle.
Can I use a generic blade for a Troy-Bilt mower?
Yes, if the generic blade matches the OEM part number and dimensions. Look for replacements that list your specific Troy-Bilt model, such as the TB110 or TB240. Ensuring the blade length and center hole geometry match prevents fitment issues and ensures balanced operation.
Why is my mower blade dulling so quickly in sandy soil?
Sand acts as an abrasive that wears down the cutting edge faster than regular grass. This causes the blade to lose sharpness, leading to torn grass tips and reduced cutting efficiency. Consider blades made from harder steel or check our guide on sharpening techniques to extend life.
How do I safely remove a stuck mower blade bolt?
Disconnect the spark plug first to prevent accidental startup. Use a penetrating oil on the bolt if it is rusted, and hold the blade in place with a block of wood. For detailed steps, refer to this practical guide for stuck bolts.


Write Your Review
No reviews yet. Be the first to share your experience!