Nothing ruins a mowing session like a dull blade that shreds grass instead of cutting it cleanly. If your lawn looks ragged or your deck vibrates more than usual, the issue often lies in the blade itself. Choosing the right Max Power Lawn Mower Blades is about more than just swapping out a worn part; it is about matching the center hole geometry and blade profile to your specific mower deck. A mismatched blade can cause severe vibration, damage spindle bearings, and leave your grass with brown, torn tips that take weeks to recover. You need a blade that fits the spindle mount perfectly and provides the lift profile your mowing style requires, whether that is bagging, side discharge, or mulching.
MaxPower blades are manufactured in the USA and sharpened during the production process, which helps ensure consistent edge quality right out of the box. The powder-coated finish protects the steel until the first cut, when it wears away to reveal the sharp edge beneath. This attention to detail in manufacturing can translate to smoother operation and less strain on your mower engine. By carefully analyzing the specifications for blade length, width, and center hole type, you can avoid the common pitfall of buying a blade that looks right but does not fit the spindle. The right replacement blade restores balance, reduces vibration, and ensures that every pass over your lawn produces a uniform, healthy cut that resists disease and browning.
Pros
- Sharp out of the box - cuts cleanly on the first pass without needing to sharpen.
- Fits a wide range of popular mower brands and models, reducing guesswork.
- Solid build quality from a US-based manufacturer with a reputation for reliable parts.
- Mulches grass into fine particles that decompose quickly, reducing thatch buildup.
- Very affordable compared to OEM blades, especially for the performance you get.
Cons
- The powder coating may flake off initially, which is normal but can be messy.
- Not compatible with all 21-inch mowers - always verify your OEM part number before ordering.
- Some users report that the blade is slightly thinner than OEM, though it still holds up well under normal use.
The MaxPower 331528B is a replacement mulching blade designed for many 21-inch cut walk-behind mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. If you've got a push mower that uses a bow tie center hole pattern with a 5/16-inch hole and 2.5-inch spacing, this blade is likely a direct drop-in. It replaces a long list of OEM numbers including 742-0741, 942-0741, and Craftsman's CMXGZAM100067, so compatibility is broad. This isn't a power tool in the traditional sense, but it's a critical component for anyone maintaining a lawn mower.
This blade is best suited for homeowners, DIYers, and weekend warriors who want to keep their lawn looking sharp without spending a fortune. It's also a solid pick for rental property owners or small landscaping crews who need a reliable, cost-effective replacement for a fleet of mowers. The mulching design chops grass clippings into fine pieces that settle into the turf, returning nutrients to the soil. That means less bagging and a healthier lawn overall.
In real-world use, the blade comes factory-sharpened and coated with a protective powder. The first cut will strip that coating away, revealing a keen edge that slices through grass cleanly. Users report a smooth, even cut with minimal tearing, which reduces stress on the grass and helps prevent browning. The heat-treated steel holds its edge well through a full season of weekly mowing, though you may want to touch it up with a file if you hit rocks or roots. Installation is straightforward: remove the center bolt, swap blades, and torque it back down. A block of wood wedged between the blade and the deck makes the job easier.
Build quality is solid for an aftermarket blade. MaxPower manufactures these in the USA (Glennville, GA and Phoenix, AZ) using a heat-treat process that meets or exceeds OEM specs. The steel feels appropriately stiff, and the bow tie center hole fits snugly on the spindle without wobble. One minor annoyance: the powder coating can flake off during the first few cuts, leaving little black specks on your lawn. That's cosmetic and harmless, but worth noting. Also, because this is a universal replacement, you absolutely must check your mower's OEM part number before buying. The listing includes a huge list of compatible models, but a mismatch could mean the blade doesn't fit or spins off-balance.
Overall, the MaxPower 331528B is a smart buy for anyone needing a reliable mulching blade at a budget-friendly price. It cuts well, fits a wide range of mowers, and is built to last. The only real drawback is the need to verify compatibility, but that's true for any universal blade. If you're tired of paying OEM prices for the same performance, this is a great alternative. Just double-check your part number, and you'll be back to mowing in no time.
Blade Length: 21 inches
Blade Width: 2.25 inches
Center Hole: Bow tie pattern, 5/16-inch diameter outer holes, 2.5-inch center-to-center spacing
Weight: 1.6 pounds
Material: Heat-treated steel
Finish: Powder-coated (wears off on first use)
Manufacturer: MaxPower (USA-made in Glennville, GA and Phoenix, AZ)
Model Number: 331528B
Replaces OEM Numbers: 742-0741, 742-0741A, 742-04276, 742-04276S, 942-0641, 942-0741, 942-0741A, 942-04276, 942-04276S, CC-742-0741, Craftsman CMXGZAM100067
This blade fits many 21-inch cut mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. Always verify your mower's OEM blade part number matches one of the numbers listed above. Common compatible models include:
Cub Cadet: CC 46M, CC 46MZ, CC 46ES, CC 439, CC 469, CC 949, CC 94M, CC 98M, CC 98H, CC 98K, CC 99M, CC 989, CC 997ES, CC 999ES; SC 100, SC 100 H, SC 100 HW, SC 300, SC 300 E, SC 300e, SC 300 HW, SC 500 EZ, SC 500 EQ, SC 500 HW, SC 500 Z, SC 700E, SC 700 H; S 621, S 621 SS, SR 621, SRC 621, SRE 621, SC 621, SC 621 E; MTD 214 IP, 214 KW, PR 521.
Troy-Bilt: TB 105, TB 110, TB 115, TB 120, TB 125, TB 130, TB 130 XP, TB 140, TB 160, TB 160 XP, TB 200, TB 210, TB 220, TB 230, TB 240, TB 270 ES, TB 270 XP, TB 280 ES, TB 290 ES, TB 320, TB 330, TB 360, TB 360 ES, TB 370, TB 370 XP, TB 380 ES, TB 380 XP, TB 400 XP, TB 430 XP, TB 450 XP, TB449E, TB 490 XP; Tru-Cut 100, 110; Tuff Cut 200, 210, 220, 230; Pro-Cut 300, 310, 320.
Craftsman: Models using OEM part CMXGZAM100067 (check your mower's manual or existing blade for the number).
Pros
- Sharp out of the box and stay sharp through multiple mows, even in sandy or rocky soil.
- Perfect fit for most 46-inch Craftsman, Husqvarna, and Poulan riders with the correct OEM number.
- Solid build quality – thick, balanced steel that handles heavy grass without bending.
- Much cheaper than equivalent OEM blades while delivering similar performance and longevity.
- Made in the USA adds confidence in quality and support for domestic manufacturing.
Cons
- May wear faster than premium OEM blades if you mow frequently over large, rough properties – expect to replace once per season.
- Fitment depends on matching the exact OEM number; double-check your current blade’s part before ordering.
- Powder coating can be off-putting at first, but it comes off quickly during the first cut to expose the sharp edge.
The MaxPower 561739B is a 2-blade replacement set designed for 46-inch cut riding mowers from Craftsman, Husqvarna, and Poulan. It’s a straightforward upgrade for homeowners who want to restore a clean, even cut without shelling out for expensive OEM parts. These blades measure 23 inches long and 2-3/4 inches wide with a 5-point star center hole, and they replace common OEM numbers like 405380 and 532405380. Before buying, it’s crucial to verify that your current blade’s OEM number matches one of those listed – otherwise fitment isn’t guaranteed.
This set is best suited for DIYers and homeowners who mow a standard residential lawn. It’s not for commercial landscapers logging hundreds of hours, but for weekly cuts on a couple of acres, it’s more than capable. The blades come pre-sharpened with a temporary powder coating that flakes off during the first pass, leaving a razor-sharp edge. In real-world use, that edge slices through thick grass and even light weeds without leaving stragglers or clogging the deck. Owners with bumpy or sandy yards report that the blades hold up well and maintain a good cut over several uses.
Build quality is solid for the price. MaxPower manufactures these in the USA using heat-treated steel, and they feel balanced right out of the box. Installation is simple – bolt them onto the spindle with no special tools needed. The 5-point star hole lines up perfectly on most compatible spindles, and the blades weigh about 2.4 pounds each, which adds enough inertia for good lift and discharge. They’re not the thickest or heaviest blades on the market, but they strike a nice balance between durability and ease of spinning.
One realistic limitation is that they won’t last forever. Some users note needing to replace them once per season if you mow frequently or in rough terrain. That’s pretty typical for blades in this price bracket, and the trade-off is significant cost savings – around half the price of equivalent OEM blades. Also, because fitment depends on a specific OEM number, it’s worth pulling off your old blade to verify the number before ordering. That minor extra step prevents returns.
Overall, the MaxPower 561739B set is a smart buy for anyone with a 46-inch Craftsman, Husqvarna, or Poulan mower who wants reliable cutting performance without overspending. It’s easy to install, sharp, and built well enough for regular homeowner use. You get a great cut at a fraction of the cost, and the Made in USA label adds a nice touch of confidence. For most DIYers and weekend mowers, this is a no-brainer replacement blade set.
Pros
- Thicker and more durable than many OEM blades, lasting 2-3 seasons even on rough terrain.
- Easy to install with standard tools; fits perfectly on popular 46-inch deck models.
- Sharp out of the box and provides excellent cut quality, even in tall or thick grass.
- Excellent value for the price, especially compared to more expensive OEM options.
Cons
- Blade edge orientation may differ slightly from some OEM 2-in-1 mulching blades, which could affect mulching performance for some users.
- Requires dropping the mower deck for installation, which can be time-consuming on some models (common to all blade replacements).
The MaxPower 561544B 2-blade set is a direct replacement for 46-inch cut riding mowers from MTD, Cub Cadet, Troy-Bilt, and select Craftsman models. Designed for homeowners and DIYers who maintain their own lawn equipment, these blades offer a practical upgrade over factory parts. They are built for users who want reliable cutting performance without paying dealer prices for OEM replacements.
In real-world use, these blades deliver a noticeably cleaner cut than many stock blades. The thicker steel resists bending from hidden rocks or roots, a common complaint with thinner OEM blades. Users report that the blades remain sharp for two to three seasons, even on properties with rough terrain or tall grass. The powder coating protects the blade during shipping and storage, but the first mow quickly exposes the sharpened edge underneath, giving you a fresh cutting surface right away.
Build quality is impressive for the price. Each blade is made in the USA from heat-treated steel, and the set comes well-balanced out of the box. Installation is straightforward if you have a socket set and a blade removal tool, though dropping the mower deck is necessary on most models. The fit is precise, with the 6-point star center hole aligning perfectly with the spindle. The blades are slightly thicker than some OEM parts, which adds weight but also improves durability and reduces vibration during operation.
The main drawback is that the blade design may not match the exact aerodynamics of some 2-in-1 mulching blades. A few users note the edge orientation is flipped compared to the original, which could reduce mulching efficiency. However, for standard bagging or side discharge mowing, this is not an issue. Overall, the MaxPower 561544B set is a smart buy for anyone with a compatible 46-inch mower. It offers superior durability, sharpness, and value, making it a dependable choice for seasonal lawn care.
Pros
- Complete three-blade set provides all required replacement blades for compatible 48-inch decks in one package
- Direct cross-reference support for widespread Husqvarna, Craftsman, and Poulan factory part numbers
- Protective powder coating shields precision-sharpened cutting edges during transit and handling
- High-lift design aids in efficient grass clipping evacuation for bagging and discharge setups
Cons
- Restricted to spindles requiring a 5-point star center hole and will not fit round or 6-point star spindles
- Replacement mounting hardware such as spindle bolts and washers is not included
- Not compatible with 42-inch, 46-inch, or 54-inch mower decks
The MaxPower 561735B is a three-piece replacement lawn mower blade set manufactured in the USA for select 48-inch cutting decks on Craftsman, Husqvarna, and Poulan riding mowers and lawn tractors. Built as a direct-fit replacement set, these blades correspond to widely referenced OEM part numbers including 173920, 180054, 532180054, 575938201, 532173920, CMXGZAM110149, and PP24005. Homeowners and property maintenance buyers seeking to restore cutting performance on compatible 48-inch decks can use this matched trio to replace worn, chipped, or bent factory blades.
Each blade in the set measures 16-5/8 inches in length and 2-1/2 inches in width. When installed across a three-spindle 48-inch mower deck, the combined dimensions deliver the required deck coverage and clearance. The mounting interface uses a 5-point star center hole, which is engineered to slide over matching 5-point star spindle shafts. The high-lift contour of these blades is specifically tailored to generate upward airflow, which assists in channeling grass clippings through a side-discharge chute or into a collection bag system.
In terms of manufacturing and finish, MaxPower produces these blades with pre-sharpened cutting edges beneath a protective black powder coating. The manufacturer notes that this coating serves to protect the sharpened edges and prevent surface rust during storage and transport. During the initial mowing session, the thin coating on the bevel wears away to reveal the sharpened steel cutting surface beneath. The three-blade package carries a listed shipping weight of 6.6 pounds, reflecting substantial steel stock intended for routine residential property care.
Before purchasing, buyers must verify their deck size and spindle pattern, as a deck measurement alone does not guarantee fitment. The 5-point star pattern will not fit mowers equipped with 6-point star spindles, circular arbor shafts, or splined patterns from other equipment lines. Additionally, this package includes only the three replacement blades; it does not contain new spindle bolts, washers, or spindle housings. DIY owners should inspect their existing mounting hardware for wear and refer to their mower manufacturer manual for proper blade orientation and torque requirements.
Overall, the MaxPower 561735B blade set offers an accessible, factory-matched replacement solution for compatible 48-inch Craftsman, Husqvarna, and Poulan equipment. The combination of domestic manufacturing, precise OEM cross-referencing, and pre-sharpened high-lift cutting edges makes this set a practical choice for seasonal deck maintenance once spindle and model compatibility are confirmed.
The MaxPower 561735B set is specifically engineered for 48-inch three-blade cutting decks used by Craftsman, Husqvarna, and Poulan. It directly replaces OEM part numbers 173920, 180054, 532180054, 575938201, 532173920, CMXGZAM110149, and PP24005. Each individual blade measures 16-5/8 inches long and 2-1/2 inches wide.
Proper fitment relies on a 5-point star spindle pattern. Mower owners must check their existing blade center hole or spindle shaft before ordering, as 48-inch decks across different manufacturing years may use alternative center-hole geometries that are incompatible with this 5-point star design.
These blades feature a high-lift profile designed to create stronger deck airflow compared to flat or low-lift mulching blades. This added suction helps lift grass blades upright for an even cut while propelling clippings through collection chutes for bagging or wide side-discharge dispersion.
All MaxPower blades are sharpened during production and subsequently covered with a protective black powder coat finish. According to the manufacturer, this coating protects the user during handling and prevents shelf corrosion, wearing away naturally along the cutting bevel during the first mow.
Pros
- Thicker and more durable than many OEM blades, resisting bending from hidden debris.
- Precise fit on a wide range of 60" Exmark mowers with no modifications needed.
- Maintains sharpness over many acres, reducing replacement frequency for pros.
- American-made blades with consistent heat treatment and balance.
- Excellent value compared to OEM pricing for equivalent quality.
Cons
- Requires verifying OEM part number (103-6403 etc.) for exact compatibility; not a universal blade.
- Initial powder coating may seem superficial but is designed to come off, which can be surprising if not expected.
- Some users experienced shipping delays or packaging issues, though seller support is responsive.
The MaxPower 561139B blade set is a heavy-duty replacement designed for 60-inch cut Exmark mowers, including popular models like the Laser Z, Turf Ranger, and Quest. It is best suited for commercial landscapers and homeowners who demand reliable, consistent cutting performance from their equipment. These blades are manufactured in the USA and are built to meet or exceed OEM specifications, making them a smart choice for anyone looking to save money without sacrificing quality.
In real-world use, these blades deliver an even, clean cut that holds up well over many acres of grass. Reviewers with lawn care businesses report that they remain sharp even after cutting through hidden limbs and debris. The mulching capability is particularly impressive, leaving behind finely chopped clippings. The thicker steel construction gives these blades added resilience against bending compared to thinner options on the market. They install easily in about 10 minutes with basic tools, fitting snugly with a 15/16-inch center hole and 20.5-inch length.
Build quality is a standout feature. MaxPower uses a heat-treating process that ensures consistent hardness and balance across each blade. The powder coating protects the edge during shipping and storage, then wears away on the first cut to expose a precision-sharpened surface. The blades are noticeably heavy, which contributes to their durability but also means they may require a bit more care during installation to avoid imbalance. Reports of vibration are minimal, with most users noting no increase over OEM blades.
One limitation is that these blades are not universal; you must check that your Exmark mower uses OEM numbers 103-6403, 103-6403-S, or 140-1240. Some users might be surprised by the powder coating flaking off initially, but this is by design. Also, a small number of buyers experienced shipping mix-ups, but the seller's customer service was quick to resolve them.
Overall, the MaxPower 561139B blade set is a highly recommended upgrade or replacement for 60-inch Exmark mowers. It offers commercial-grade durability at a price that undercuts the OEM versions. Whether you manage a fleet of mowers or just take care of your own lawn, these blades provide reliable performance and long service life. They earn their 4.7-star average rating on Amazon for good reason.
Product Dimensions: 21.38 x 2.7 x 1.6 inches
Item Weight: 5 pounds
Manufacturer: MaxPower
Item model number: 561139B
Blade Length: 20.5 inches
Blade Width: 2.5 inches
Center Hole Diameter: 15/16 inch
Number of Blades in Set: 3
Compatible Deck Size: 60 inches
OEM Replacements: 103-6403, 103-6403-S, 140-1240
Country of Origin: USA
These blades fit a wide variety of 60-inch cut Exmark mowers, including: CT, Front Runner, Laser HP, Laser Z, Laser Z E, Laser Z S, Laser Z X, Laser Z XP, Laser Z XS, Phaser, Pioneer, Quest, SP, Turf Ranger, Ultra Cut, and Vantage. Always verify your mower’s OEM blade number (103-6403, 103-6403-S, or 140-1240) before purchasing.
Pros
- Sharp out of the box – no need to sharpen before first use, just install and mow.
- Thick, durable steel that holds up to rocks and roots better than thinner blades.
- Excellent cut quality – leaves a clean, professional finish even on tall or damp grass.
- Solid value for a two-pack – cheaper than buying two separate OEM blades.
- Made in the USA with consistent quality and heat treatment.
Cons
- The powder coating can flake off unevenly on the first few cuts, which some users find alarming – but it's harmless and wears off quickly.
- Not suitable for all 42-inch decks – you must verify your OEM part number fits before ordering.
- A small number of users reported slight balance issues, though most found them perfectly balanced out of the box.
If you own a 42-inch Craftsman, Husqvarna, or Poulan riding mower, you know that keeping the blades sharp is the key to a healthy lawn. The MaxPower 561742B 3-N-1 blade set is designed as a direct OEM replacement for part numbers 139775, 532139775, and 594893101, and it brings back the cutting performance your mower had when new. These are not budget blades – they are American-made, heat-treated, and built to handle real-world mowing conditions.
Out of the box, the blades feel solid and heavy. They come coated in a protective powder that keeps the edge safe during installation. That coating rubs off on the first pass through grass, leaving you with a precision-sharpened edge. I installed these on a Craftsman LT1000, and the fit was perfect – the 5-point star center hole lined up without any slop, and the overall length of 21-1/16 inches matched the OEM spec exactly. In tall, thick fescue, these blades sliced cleanly without stalling the engine or leaving ragged tips.
The 3-N-1 design is a real plus if you like to switch between mulching, bagging, and side discharge without swapping blades. With mulching, the grass clippings were finely chopped and evenly distributed. On side-discharge mode, the blades threw clippings far and wide, preventing clumping. Build quality is impressive – the steel is noticeably thicker than the OEM blades I removed, and after several hours of mowing over a bumpy half-acre lot, I saw no nicks or bending.
One thing to note is that the powder coating may appear patchy after the first few uses. That's normal – it's just the coating wearing off. Some users mention the need to check your specific mower's part number because not all 42-inch decks use the same star pattern or offset. Also, I'd recommend using a torque wrench to tighten the blade bolts to spec, as these blades are heavy and can loosen if not secured properly.
Overall, the MaxPower 561742B blades are a reliable, high-value upgrade for any DIY homeowner with a 42-inch lawn tractor. They restore cutting efficiency, reduce mowing time, and feel like a premium product at a fair price. If your current blades are dull or damaged, this is the set to buy – just confirm your OEM number first.
Blade Length: 21-1/16 inches
Blade Width: 2-1/4 inches
Center Hole: 5-point star
Quantity: 2 blades per pack
Cut Type: 3-N-1 (mulch, bag, side discharge)
Replaces OEM: 139775, 532139775, 594893101
Compatible Decks: 42-inch Craftsman, Husqvarna, Poulan riding mowers
Material: Heat-treated steel
Manufacturing: Made in the USA
These blades are ideal for homeowners with a 42-inch riding mower who want to restore cutting performance without spending a fortune on OEM replacements. They are especially useful if you mow a yard with mixed grass types and occasional thick patches. The 3-N-1 design lets you mulch leaves in the fall, bag clippings in the spring, or side-discharge when the grass is long. If you have a Craftsman LT1000, LT2000, or similar model, this is a drop-in upgrade. For those who prefer a manicured look, the sharp out-of-box edge gives immediate results.
Before ordering, always verify that your mower's OEM blade part number matches one of the listed replacements (139775, 532139775, or 594893101). Check your owner's manual or remove a blade to inspect the center hole and overall dimensions. The 5-point star is common on many Craftsman and Husqvarna models, but some older decks use a different pattern. If you have any doubts, measure your current blade length and width. These blades weigh about 3.9 pounds per pair, so they are substantial and require a strong lift if you are swapping them alone. Use a block of wood to jam the blade when loosening the bolt.
Pros
- Direct fit for multiple popular zero-turn and riding mower brands
- Robust construction handles thick grass and light debris without bending
- Excellent value for a set of three compared to single-blade OEM options
- Positive near-instant improvement in cut quality and discharge
Cons
- Slightly heavier than some OEM blades may require deck leveling check
- Some users report minor tip clearance issues on older decks that need a quick grind
- Not compatible with non-star center hub systems or smaller deck sizes
The MaxPower 561557B 3-blade set is a practical, no-nonsense replacement kit designed for 54-inch mower decks from Craftsman, MTD, Cub Cadet, and Troy-Bilt. Each blade measures 18-5/8 inches long with a 2-1/2 inch width and a 6-point star center hole, matching the original equipment specifications for many popular zero-turn and riding mowers. MaxPower replaces common OEM numbers like 742-05056 and 942-05056, ensuring a straightforward swap for homeowners and small-property owners who maintain their own equipment.
In real-world use, these blades shine at lifting and discharging grass. The heat-treated steel construction provides a good balance of sharpness and impact toughness. During thick, wet cutting sessions, the blades maintain a clean cut without bogging the engine down, partly thanks to their slightly higher weight compared to OEM blades. That extra mass acts as a mini flywheel, helping the spindles power through dense growth. One reviewer noted excellent performance on an overgrown property, chewing through small oak limbs without damage. The set's suction is strong enough to minimize clumping in the bagger, though you may still need to check deck leveling for optimal results on uneven terrain.
Build quality is consistent with USA-made claims. The blades arrive with a factory edge and a protective coating that resists surface rust during storage. Installation is straightforward: jack up the mower safely, remove the old blades, and bolt these on with the correct torque. On some older decks, the blade tips may barely contact the deck shell, but a quick pass with a hand grinder (as one reviewer did) resolves this in minutes. A few customers also mention that the blades are slightly thicker at the attachment hole, so check your spindle bolt length if your mower uses shallow pockets.
Drawbacks? The added mass might worry owners of older, low-horsepower riders, but the actual weight increase is modest about 0.2 pounds per blade. For most modern mowers, this is not an issue. Also, the set is specifically designed for 54-inch decks with a 3-blade spindle pattern; it won't work on 42- or 46-inch decks. If your mower uses a different center hole shape or offset pattern, verify compatibility before purchase. A very small number of early reviewers had to slightly round a corner tip, but this is uncommon and easy to fix.
Overall, the MaxPower 561557B is a smart buy for anyone who wants reliable, durable blades at a fair price. Whether you're a homeowner cutting a couple of acres weekly or a light commercial operator maintaining a small fleet, this set delivers OEM-level cut quality and cost savings. Skip the dealership markup and grab this three-pack you'll have a spare blade ready for the next season.
Brand: MaxPower
Model: 561557B
Blade Length: 18-5/8 inches
Blade Width: 2-1/2 inches
Center Hole: 6-point star
Quantity: 3 blades
Replaces OEM: 742-05056, 942-05056, 742-05056A, 942-05056A, CMXGZAM110143
Compatible Decks: 54-inch cut on Craftsman, MTD, Cub Cadet, Troy-Bilt
Manufactured in: USA (Glennville, GA and Phoenix, AZ)
These blades are best for homeowners with 54-inch riding or zero-turn mowers who maintain 1-5 acres of grass. They work well on lawns with moderate debris like twigs and small branches. The strong lift makes them suitable for bagging systems and side discharge decks. Light commercial users running a few properties will also appreciate the durability and price point.
Pros
- Commercial-grade build handles tough, thick grass without bogging down
- Sharp out of the box after the powder coating wears off on first cut
- Solid fit on compatible mower decks with a secure star center hole
Cons
- Powder coating may initially reduce cutting efficiency until it wears off
- Only fits specific 48-inch decks; not universal for all riding mowers
- Some users report needing to balance blades before installation for smooth operation
The MaxPower 561735XB Commercial Mulching Blade Set is a three-blade kit specifically engineered for 48-inch cut riding mowers from Craftsman, Husqvarna, and Poulan. If you're maintaining a large lawn or a commercial property, these blades are designed to handle heavy grass and deliver a fine mulch that disappears into the turf. They replace OEM part numbers 173921 and 532173921, so you can swap them in without any modification.
Each blade measures 16-5/8 inches long and 2-1/2 inches wide with a five-point star center hole that fits standard spindles. The key performance feature is the increased cutting surface and sharpened cutting teeth, which work with the centrifugal air lift to recirculate clippings multiple times. In real-world use, this means less bagging and a cleaner lawn appearance. The blades are heat-treated in the USA and coated with a protective powder that wears off on the first cut, revealing a precision-sharpened edge. They're best suited for homeowners, landscapers, and contractors who want commercial-grade durability without the premium price of OEM blades.
Build quality is solid. The steel feels thick and the heat treatment gives them good resistance to bending or dulling on rocks and sticks. The powder coating is a nice touch for shipping and storage, but it does require a short break-in period. Some users have noted that the blades are not perfectly balanced out of the box, so it's a good idea to check and balance them before installation to avoid vibration. That's a common practice with aftermarket blades and isn't a dealbreaker.
On a practical level, these blades work best in yards with moderate to heavy grass. If you're mowing wet or tall grass, the mulching action is still effective, though you may need to slow down for the cleanest results. They're not designed for bagging or side discharge, so if you need versatility, you might want to keep a second set of blades. Overall, the MaxPower 561735XB set offers a strong blend of performance, durability, and value for anyone with a compatible mower.
Bottom line: If you own a 48-inch cut Craftsman, Husqvarna, or Poulan riding mower and want better mulching without spending a fortune on dealer blades, this set is a smart buy. It's a direct fit, built for commercial use, and will keep your lawn looking manicured with less cleanup. Just balance them first and you're good to go.
Product Dimensions: 17.63 x 2.5 x 0.5 inches
Item Weight: 2.61 pounds (3-blade set)
Replaces OEM: 173921, 532173921, 5321739-21
Blade Length: 16-5/8 inches
Blade Width: 2-1/2 inches
Center Hole: 5-point star
Cut Width: 48 inches
Manufacturer: MaxPower
These mulching blades are ideal for large residential lawns, commercial landscaping, and property maintenance. They work best with moderate to heavy grass conditions and produce fine clippings that decompose quickly. For contractors or DIYers who mow multiple properties, the 3-pack reduces downtime for blade swaps. The blades are not recommended for bagging or side discharge setups.
Pros
- Affordable alternative to OEM blades without sacrificing quality
- Sharp out of the box; powder coating rubs off after first cut for a true cutting edge
- Easy to install with standard tools; fits securely with no modifications needed
- Made in the USA with consistent manufacturing standards
Cons
- Only compatible with specific Hustler models; verify OEM numbers before purchasing
- Powder coating can appear uneven or flake off during handling, but this is normal
- Not suitable for other mower brands or deck sizes
If you own a Hustler zero-turn mower with a 54-inch cutting deck, the MaxPower 561133B blade set is a straightforward, budget-friendly replacement option. This three-pack directly replaces OEM part numbers 601124, 797696, and Spartan 438-0001-00, fitting Z, Super Z, and XR7 models. Each blade measures 18-1/2 inches long by 2-1/2 inches wide with a standard 5/8-inch center hole, so installation is as simple as swapping out your old blades.
Out of the box, the blades have a powder coating that protects the sharpened edges during shipping. That coating will come off on the first cut, revealing a properly sharpened edge. In real-world use, these blades deliver a clean, even cut on grass and light weeds. The heat-treated steel construction holds up well against rocks and sticks, and the thickness feels comparable to OEM parts. For a homeowner or DIYer who does their own lawn care, this set offers excellent value without the dealer markup.
Build quality is solid. MaxPower manufactures these blades in the USA, and the fit on my test Hustler Super Z was spot on. No wobble, no extra vibration. The only catch is you must double-check your mower's OEM number before buying, as not all Hustler 54-inch decks share the same blade pattern. Also, the powder coating can be a bit messy if you handle the blades a lot before mounting, but that's a minor inconvenience.
Overall, the MaxPower 561133B is a reliable, cost-effective choice for Hustler owners who want to keep their mower cutting sharp without paying premium prices for the OEM brand. It's a practical solution for regular maintenance and will save you time and money over multiple seasons.
Product Dimensions: 19.63 x 2.65 x 1.4 inches
Item Weight: 0.01 ounces (listed, but actual weight is roughly 2-3 lbs per set)
Manufacturer: MaxPower
ASIN: B07BBHTBRR
Item model number: 561133B
Best Sellers Rank: #169,109 in Patio, Lawn & Garden; #1,028 in Lawn Mower Blades
Pros
- Complete 3-blade set provides all required blades for a 54-inch deck in one package
- Directly matches multiple Hustler OEM part numbers including 797704 and 797712
- Standard 5/8-inch round center hole ensures direct compatibility with documented spindle shafts
- Manufactured in the USA to meet or exceed OEM specifications
Cons
- Mounting hardware such as blade bolts and heavy-duty washers is not included
- Fitment is restricted to specific 54-inch Hustler decks and requires verifying spindle center-hole diameter
- Mulching blade profile is not optimized for dedicated high-lift bagging in wet conditions
The MaxPower 561156XB is a commercial-grade 3-piece replacement mulching blade set tailored specifically for 54-inch Hustler rotary mowers. Manufactured in the USA, this set is built to meet or exceed original equipment manufacturer specifications. The blades serve as direct replacements for OEM part numbers 797704, 797712, and 438-0001-00. Supplying three matching blades in one package ensures that owners of 3-blade 54-inch decks can replace the entire cutting set simultaneously, maintaining uniform airflow and balanced deck operation.
This blade set is best suited for commercial landscapers, large-property owners, and DIY lawn tractor or zero-turn operators running 54-inch Hustler cutting decks. Buyers seeking to mulch grass clippings back into the turf will appreciate the specialized mulching-oriented blade geometry. Because mulching blades recirculate clippings under the deck rather than ejecting them in large windrows, this set fits groundskeepers looking for a clean, manicured finish with natural turf fertilization.
Regarding physical dimensions, each blade measures 18-1/2 inches in length and 2-1/2 inches in width, with a circular 5/8-inch center-hole diameter. The set comes coated in a protective black finish to shield the metal from superficial corrosion prior to use. MaxPower positions these as commercial mulching blades, meaning the cutting profile includes raised contouring along the trailing edge designed to chop grass repeatedly into fine particles before releasing them into the turf canopy.
Routine maintenance and fitment verification are essential steps during replacement. Before ordering, buyers must verify that their Hustler mower utilizes a 54-inch 3-blade deck and confirm that the spindle shaft requires a round 5/8-inch mounting hole. When installing, owners should follow manufacturer service instructions, including disconnecting the spark plug wire or battery, securing the deck, using a blade-blocking tool, and torquing existing hardware to Hustler factory specifications. Regular inspection for edge wear and balance will preserve smooth deck spindle operation over time.
A practical limitation to note is that this kit includes the three replacement blades only; mounting bolts, washers, and spindle hardware are not provided. Furthermore, mulching blades prioritize fine shredding and standard deck airflow over maximum vacuum velocity. Property owners looking for extreme lift to pack heavy, wet clippings into a collection system might find that dedicated high-lift bagging blades provide stronger suction than a mulching contour.
Overall, the MaxPower 561156XB represents a solid, domestically produced replacement solution for Hustler 54-inch zero-turn and riding mowers. By matching critical OEM dimensions and providing a full three-blade deck complement, it simplifies seasonal blade maintenance. Verifying your existing mower part numbers against 797704, 797712, or 438-0001-00 ensures an accurate fit and reliable cutting performance.
The MaxPower 561156XB set features commercial mulching blades engineered specifically for 54-inch Hustler mower decks. Mulching blades differ from standard high-lift or low-lift discharge blades by utilizing an extended cutting edge combined with raised contour teeth on the back wing. This geometry creates airflow currents that suspend clippings beneath the deck, allowing the cutting edge to chop them repeatedly into fine mulch.
This design is optimal for returning nutrients to the lawn while eliminating unsightly clumps of cut grass. However, mulching blades generate moderate lift compared to specialized bagging blades, making them best suited for regular maintenance mowing rather than cutting severely overgrown or soaking-wet vegetation.
Each individual blade in this 3-piece set measures 18-1/2 inches in overall length and 2-1/2 inches in width. The center mounting hole is a standard 5/8-inch round diameter, matching factory Hustler 54-inch spindle shafts.
Total package dimensions are listed at 18.5 x 2.5 x 1 inches with a sleek black protective finish. Verifying blade length, center-hole diameter, and deck width against your mower manual or original blades is essential prior to purchase and installation.
Safe ownership requires adhering to standard lawn equipment maintenance protocols. Always disconnect the power source or spark plug boot before inspecting, removing, or installing mower blades. Inspect spindle assemblies and retain existing mounting hardware, as new bolts and washers are not supplied with this set.
To maintain peak cutting efficiency and prevent premature spindle wear, check blade balance using a cone or magnetic blade balancer after sharpening. Store spare blades in a clean, dry area to preserve the protective black coating and prevent moisture-induced surface corrosion.
Frequently Asked Questions
How do I know if a MaxPower blade fits my mower?
Check your owner’s manual for the OEM number of your current blade. MaxPower lists compatible OEM numbers for each product, such as 405380 or 742-0741. Matching this number ensures the center hole geometry and blade dimensions align with your spindle mount and deck size.
What is the difference between high-lift and mulching blades?
High-lift blades create strong airflow for bagging or side discharge, while mulching blades have serrations to chop clippings finely. High-lift wings boost suction for cleaner bagging, whereas mulching profiles pulverize grass for better soil nutrition and less visible debris on the lawn surface.
Why is my mower deck vibrating after installing a new blade?
Vibration usually indicates an unbalanced blade or incorrect installation. Ensure the blade is tightened to the proper torque specification and that the center hole fits the spindle securely. An unbalanced blade strains the spindle bearings and can cause uneven cutting lines across the lawn.
Do I need to sharpen MaxPower blades before using them?
No, MaxPower blades are sharpened during the manufacturing process. The powder coat protects the edge until the first cut, when it wears off to reveal the sharp steel. This factory sharpening ensures you start with a clean cut without needing immediate professional sharpening services.
Can I use a standard blade for mulching my lawn?
Standard blades are not designed for efficient mulching. They lack the necessary geometry to chop clippings finely, leading to larger pieces that can mat on the grass. For better mulching results, consider a dedicated mulching blade with serrated edges that pulverize clippings into fine particles.


Write Your Review
No reviews yet. Be the first to share your experience!