Troy Bilt Tb110 Lawn Mower Parts of 2026

The Grasscool 21-inch mulching blade is designed specifically for Troy-Bilt and compatible walk-behind mowers with a bow tie spindle. If you own a Troy-Bilt TB110, TB230, or any of the dozens of models listed, this blade offers a straightforward replacement that doesn't require modding or adapters. It's built for the homeowner or DIYer who wants a reliable blade for regular lawn care without overspending on OEM parts.

In real-world use, this blade excels at mulching. The curved design and sharp cutting edges shred grass clippings into fine particles that settle back into the soil as nutrients. The high-lift wings also create strong airflow that fluffs the clippings for even distribution or powers bagging. During heavy growth, the reduced clogging is noticeable - the blade keeps spinning without wrapping wet grass around the center. Side discharging works fine too, though the mulching performance is the standout feature.

Build quality is respectable for a budget-friendly blade. The steel is thick enough to handle occasional rocks or roots without bending, and the paint coating on the cutting edges prevents surface rust during storage. Just be aware that the paint wears off quickly after a few passes on grass - that's normal. The bow tie hole fits snugly, and the blade comes pre-balanced, so you can install it without extra fuss. If you mow a standard quarter-acre lot with a Troy-Bilt mower, this blade will hold up for a full season or two before needing a sharpen.

There are limitations. The most important is the bow tie requirement - if your spindle has a star or 5-point pattern, this blade won't work. Also, the blade is designed for 21-inch decks, so it won't fit smaller or larger mowers. For homeowners who want a single blade that does it all without swapping, this is a great choice. Contractors with commercial mowers might prefer heavier-duty options, but for residential use it's more than adequate.

Bottom line: if you have a compatible Troy-Bilt mower with a bow tie spindle and want a dependable mulching blade that also bags and discharges well, the Grasscool blade is a solid buy. It delivers real performance gains over dull or generic blades and comes at a price that won't break your tool budget.

Blade length: 21 inches (533mm)

Width: 2-1/4 inches (57mm)

Thickness: 9/64 inch (3.4mm)

Center hole shape: Bow Tie

Air lift height: 1-1/8 inch (28mm)

Outer hole center-to-center: 2-1/2 inches (63.5mm)

Outer hole diameter: 5/16 inch (8mm)

Cutting edge length: 6-1/8 inches (155mm)

Weight: 3.39 pounds (set of two)

Package dimensions: 22 x 3 x 1.5 inches

This blade fits walk-behind, push, and self-propelled mowers with a 21-inch cutting deck from 1995 onward. Compatible brands include Troy-Bilt, Cub Cadet, Craftsman, MTD, Bolens, White Outdoor, Murray, Snapper, Yard Machines, Yard-Man, and Huskee.

Specific Troy-Bilt models: TB110, TB115, TB120, TB125, TB130, TB130 XP, TB140, TB160, TB160 XP, TB200, TB210, TB220, TB230, TB240, TB270 ES, TB270 XP, TB280 ES, TB290 ES, TB320, TB330, TB360, TB360 ES, TB370, TB370 XP, TB380 XP, TB380 ES, TB400 XP, TB430 XP, TB450 XP, TB490 XP, and many others.

Cub Cadet and Craftsman models: CC469, CC989, CC997ES, PR521, S621, SC621, SR621, SRE621, and Craftsman M250, M260, M110, M105, M140, M270, M115, M100, M210, M230, M320, M310.

Always verify your spindle shape - this blade only fits bow tie center holes.

A broken starter rope or snapped recoil spring can stop yard work before it even begins. The Kuupo 593959 Recoil Starter Assembly is an aftermarket replacement part engineered to restore the manual pull-start mechanism on walk-behind gas lawn mowers. Designed for everyday residential push mowers and self-propelled units, this component is best suited for suburban homeowners, DIY property owners, and budget-conscious lawn care enthusiasts looking to get their equipment running smoothly without the expense or delay of taking the machine to an outdoor power equipment repair shop.

This pull starter fits an extensive lineup of popular entry-level and mid-range residential mowers. It serves as a direct replacement for Briggs & Stratton part numbers 593959, 591139, 593961, and 590588, which power widely used mowers like the Troy-Bilt TB110, TB115, TB200, and TB554, as well as Craftsman M110 and M115 models, and select Husqvarna walk-behinds with 140cc to 150cc engines. Whether tackling weekly mowing in the front yard or mulching fallen leaves in autumn, having a dependable pull start ensures you can fire up the engine on the first or second pull without frustrating cord hang-ups.

The assembly features a pre-wound internal recoil spring, a durable pull cord, and an ergonomic pull handle mounted inside an impact-resistant polymer housing. The spring provides sufficient tension to smoothly retract the starter rope after every pull, preventing slack from catching in the engine shroud or blade zone. By restoring proper engagement with the starter cup on 450E, 500E, 550E, 550EX, and 625E series small engines, it eliminates the slipping and binding common to worn-out original equipment starters.

Installation is straightforward for anyone comfortable with basic hand tools. With a mounting hole diameter of roughly 5.5mm and a hole-to-hole distance of approximately 172mm (6.77 inches), the unit aligns with the factory engine shroud mounting points. Swapping out a broken starter generally takes less than fifteen minutes: simply unfasten the old assembly, transfer any retaining bolts, and bolt the new recoil unit in place. The molded plastic shroud provides good resistance against outdoor moisture, grass clippings, and engine heat encountered during routine mowing sessions.

A practical limitation to keep in mind is fitment precision. Small engines often share similar appearances across different displacement classes, so homeowners should verify their specific engine model number (such as 08P502, 093J02, 09P602, or 09P702) and measure their bolt pattern before ordering. Additionally, replacement hardware is not included in the package, meaning you will need to retain and reuse your mower's original mounting screws. Care should also be taken when tightening fasteners into the plastic housing to avoid cracking the mounting tabs.

For homeowners who rely on a Troy-Bilt, Craftsman, or Briggs-powered push mower for weekly grass maintenance and seasonal property upkeep, this Kuupo replacement starter offers an accessible, practical fix. It delivers dependable cord action, solid value, and simple installation, making it a sensible purchase to keep your lawn looking tidy all season long.

This recoil starter is engineered specifically for small walk-behind gas lawn mowers powered by select Briggs & Stratton horizontal and vertical shaft engines. Compatible engine series include 450E, 500E, 550E, 550EX, 575EX, 600E, and 625E models, encompassing displacements from 125cc to 150cc.

Common compatible lawn mower models include the Troy-Bilt TB110, TB115, TB200, and TB554, the Craftsman M110 and M115, and the Husqvarna LC 221A. It directly replaces OEM part numbers 593959, 591139, 593961, 590588, Stens 150-012, and Ratio 003-522.

To confirm compatibility with your specific mower, locate the stamped model, type, and code numbers on your engine shroud. Compatible engine codes commonly include 08P502, 093J02, 09P602, and 09P702. Verifying these numbers ensures trouble-free installation and reliable engagement with your engine starter cup.

Replacing a worn recoil assembly is a quick garage project requiring only basic hand tools, such as a socket set or nut driver. Always disconnect the mower spark plug boot prior to starting any maintenance to ensure safety while working near the engine flywheel.

Remove the mounting bolts securing the damaged pull start to the top engine shroud, taking care to store the original screws for reassembly. Position the new starter over the engine flywheel cup, ensuring the mounting holes align with the approximately 6.77-inch center-to-center spacing. Hand-thread all bolts before tightening evenly in a cross pattern to seat the unit flatly without warping the plastic casing.

For long-term reliability, avoid pulling the starter rope to its absolute mechanical end-stop when starting the mower. Regularly brush away grass clippings, dust, and dried yard debris from the starter housing vents to promote optimal engine cooling and keep the internal recoil spring free of grit.

If you own a walk behind mower with a busted side discharge chute, you know the frustration of clippings blowing everywhere or the engine bogging down from deck clogging. The DECKMAN 731-07486 side discharge chute is a simple plastic part that solves that problem for a lot of popular lawn tractors and push mowers. It replaces OEM part 731-07486 and fits machines from Craftsman, Troy-Bilt, MTD, Huskee, Yard-Man, and Columbia, among others.

This part is best suited for homeowners and DIYers who maintain their own equipment and want to save a few bucks vs. buying from the dealer. It also makes sense for small landscape contractors who keep a fleet of 21 inch push mowers and need quick, reliable replacements. The chute is molded from black plastic that matches the look and feel of the original part. It weighs next to nothing, so it won't throw off the balance of the mower deck. At 11 inches across the hypotenuse and 3.4 inches high, it fits standard 21 inch decks without binding or rattling.

In real world use, this chute does exactly what it needs to. It kicks clippings out to the side so you can mow efficiently without stopping to unclog the deck. The snap on fit holds securely even when you're cutting thick, damp grass or hitting uneven spots. Just make sure you save the original screws, because the kit doesn't include hardware. Installation takes about a minute: line up the chute, insert the two screws from your old part, tighten, and you're done. No special tools or mechanical skill required.

Build quality is decent for an aftermarket plastic part. It's not as thick as some OEM pieces, but it feels sturdy enough for normal residential use. The plastic resists UV damage reasonably well, though like any lawn mower part, you should store the mower out of direct sun when possible. Compared to paying $25 or more for a branded chute, this DECKMAN part offers solid value. The main trade off is that you have to reuse your own screws, which is minor but worth remembering before you throw the old part away.

Overall, the DECKMAN 731-07486 side discharge chute is a smart buy for anyone with a compatible 21 inch walk behind mower. It restores proper clipping dispersion, installs in minutes, and costs less than a trip through the fast food drive through. If your old chute is cracked or missing, pick this one up and get back to mowing without any hassle.

This DECKMAN side discharge chute replaces OEM part number 731-07486 and is designed to fit 21 inch hand pushed lawn mowers from the following brands: Craftsman, Columbia, Huskee, Troy-Bilt, Yard-Man, MTD, Cub Cadet, and Husqvarna (select models). Specific compatible series include TB110, TB130, TB220, TB230, 11A, 12A, and many 247-xxx model numbers. Always double-check your mower's model/serial number against the list in the product description before ordering.

The Hipa 942-0741A is a replacement mulching blade designed for 21 inch cutting decks on walk-behind mowers, self-propelled mowers, and even some riding lawn tractors. It's a straightforward accessory that targets the heart of lawn care: cutting and managing grass clippings. If you own a compatible Troy Bilt, Craftsman, MTD, or similar model from the mid-1990s onward, this blade could be a smart, budget-friendly swap.

This blade excels for the typical homeowner who mows weekly and wants a cleaner yard without constant bag emptying. The 3-in-1 design means you can switch between mulching, bagging, and side discharge just by changing the mower's plug or discharge chute (depending on your mower's setup). The high-lift wing helps throw clippings into the bag more efficiently, which really cuts down on extra passes. In real-world use, the alloy steel holds up well against rocks and sticks, though any blade will dull eventually with heavy use.

Build quality is solid for the price point. The blade is made from alloy structural steel with added chromium and molybdenum, which improves hardness and corrosion resistance. The paint coating on the edges is a nice touch to reduce rust during storage and to keep your fingers safe while handling the blade. Just keep in mind that the paint will wear off quickly as you mow. At 21 inches long and 1.74 pounds, it's lightweight enough to swap without much effort, but you'll still want to use thick gloves and check for cracks before each use.

One realistic limitation is the compatibility: while the list of supported models is huge, you still need to confirm your specific mower's deck size and blade mount pattern (bow tie center hole). Not every 21 inch deck uses the same blade profile, so double check your old blade's shape and dimensions. Also, the blade does not come with mounting hardware, so reuse your existing bolts and washers or buy new ones separately.

Overall, the Hipa 942-0741A is a reliable, affordable choice for maintaining a healthy lawn without emptying the budget. It's best suited for DIY homeowners who want a straightforward replacement that works across multiple mower brands. For the price, it delivers good durability and effective mulching performance that keeps your grass looking neat and your lawn fed naturally.

Blade Length: 21 inches (533 mm)

Blade Width: 2-1/4 inches (57 mm)

Thickness: 9/64 inch (3.4 mm)

Center Hole: Bow tie shape

Air Lift: 1-1/8 inch (28 mm)

Material: Alloy structural steel (Cr-Mo enhanced)

Weight: 1.74 pounds

Deck Size Compatibility: 21 inch cut

Brand Compatibility: Troy Bilt, Craftsman, MTD, Yard Machines, Murray, Cub Cadet, Snapper, and more (1995+ models)

The Kscjdg Lawnmower Grass Bag is a replacement grass catcher designed for 21-inch walk-behind mowers from Troy-Bilt, MTD, Yard Machines, and other compatible brands. It is not a power tool in the traditional sense, but it is an essential accessory that keeps your lawn tidy and your mowing efficient. This bag is ideal for homeowners, DIYers, and anyone with an older mower whose original bag has worn out or torn.

In real-world use, the bag installs quickly onto your existing catcher frame. Many reviewers note it fits perfectly on models like the TB110, TB210, TB230, and TB280. The reinforced polyester fabric feels sturdy and does a good job containing clippings, even when they are damp and heavy. The capacity is slightly larger than some OEM bags, which means fewer stops to empty. That is a practical advantage when you are trying to finish the lawn quickly.

Build quality is decent for the price. The stitching appears robust, and the material resists tearing under normal use. However, a small number of users have experienced seam separation at the corners after several mowings, especially with very wet grass. This is a potential weakness to keep in mind if you frequently mow in damp conditions. The bag is not water resistant, so it can get soaked through, which adds weight and may cause the material to degrade faster.

One limitation is that this bag does not include the catcher frame. You must have your existing frame in good condition to attach it. Also, it is not compatible with certain Craftsman EZ Empty frames, so double-check your mower model before buying. Overall, the Kscjdg grass bag offers a practical, budget-friendly solution for replacing a worn bag on compatible mowers. If you need a quick fix that works well for most mowing seasons, this is a solid choice. Just be aware that heavy-duty use or wet grass may shorten its lifespan.

Brand: Kscjdg

Part Number: 96404117A

Compatible OEM Numbers: 964-04117A, 964-04117B, 964-04117, 664-04117A, 664-04117B, 664-04117C, and more.

Material: Reinforced polyester fabric

Color: Black

Weight: 0.57 kg (1.26 lbs)

Package Dimensions: 15.31 x 8.66 x 3.31 inches

Water Resistance: Not water resistant

Includes Frame: No (bag only)