Murray Lawn Mower Blades of 2026: Top Picks

The MaxPower 331528B is a replacement mulching blade designed for many 21-inch cut walk-behind mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. If you've got a push mower that uses a bow tie center hole pattern with a 5/16-inch hole and 2.5-inch spacing, this blade is likely a direct drop-in. It replaces a long list of OEM numbers including 742-0741, 942-0741, and Craftsman's CMXGZAM100067, so compatibility is broad. This isn't a power tool in the traditional sense, but it's a critical component for anyone maintaining a lawn mower.

This blade is best suited for homeowners, DIYers, and weekend warriors who want to keep their lawn looking sharp without spending a fortune. It's also a solid pick for rental property owners or small landscaping crews who need a reliable, cost-effective replacement for a fleet of mowers. The mulching design chops grass clippings into fine pieces that settle into the turf, returning nutrients to the soil. That means less bagging and a healthier lawn overall.

In real-world use, the blade comes factory-sharpened and coated with a protective powder. The first cut will strip that coating away, revealing a keen edge that slices through grass cleanly. Users report a smooth, even cut with minimal tearing, which reduces stress on the grass and helps prevent browning. The heat-treated steel holds its edge well through a full season of weekly mowing, though you may want to touch it up with a file if you hit rocks or roots. Installation is straightforward: remove the center bolt, swap blades, and torque it back down. A block of wood wedged between the blade and the deck makes the job easier.

Build quality is solid for an aftermarket blade. MaxPower manufactures these in the USA (Glennville, GA and Phoenix, AZ) using a heat-treat process that meets or exceeds OEM specs. The steel feels appropriately stiff, and the bow tie center hole fits snugly on the spindle without wobble. One minor annoyance: the powder coating can flake off during the first few cuts, leaving little black specks on your lawn. That's cosmetic and harmless, but worth noting. Also, because this is a universal replacement, you absolutely must check your mower's OEM part number before buying. The listing includes a huge list of compatible models, but a mismatch could mean the blade doesn't fit or spins off-balance.

Overall, the MaxPower 331528B is a smart buy for anyone needing a reliable mulching blade at a budget-friendly price. It cuts well, fits a wide range of mowers, and is built to last. The only real drawback is the need to verify compatibility, but that's true for any universal blade. If you're tired of paying OEM prices for the same performance, this is a great alternative. Just double-check your part number, and you'll be back to mowing in no time.

Blade Length: 21 inches

Blade Width: 2.25 inches

Center Hole: Bow tie pattern, 5/16-inch diameter outer holes, 2.5-inch center-to-center spacing

Weight: 1.6 pounds

Material: Heat-treated steel

Finish: Powder-coated (wears off on first use)

Manufacturer: MaxPower (USA-made in Glennville, GA and Phoenix, AZ)

Model Number: 331528B

Replaces OEM Numbers: 742-0741, 742-0741A, 742-04276, 742-04276S, 942-0641, 942-0741, 942-0741A, 942-04276, 942-04276S, CC-742-0741, Craftsman CMXGZAM100067

This blade fits many 21-inch cut mowers from MTD, Cub Cadet, Troy-Bilt, and Craftsman. Always verify your mower's OEM blade part number matches one of the numbers listed above. Common compatible models include:

Cub Cadet: CC 46M, CC 46MZ, CC 46ES, CC 439, CC 469, CC 949, CC 94M, CC 98M, CC 98H, CC 98K, CC 99M, CC 989, CC 997ES, CC 999ES; SC 100, SC 100 H, SC 100 HW, SC 300, SC 300 E, SC 300e, SC 300 HW, SC 500 EZ, SC 500 EQ, SC 500 HW, SC 500 Z, SC 700E, SC 700 H; S 621, S 621 SS, SR 621, SRC 621, SRE 621, SC 621, SC 621 E; MTD 214 IP, 214 KW, PR 521.

Troy-Bilt: TB 105, TB 110, TB 115, TB 120, TB 125, TB 130, TB 130 XP, TB 140, TB 160, TB 160 XP, TB 200, TB 210, TB 220, TB 230, TB 240, TB 270 ES, TB 270 XP, TB 280 ES, TB 290 ES, TB 320, TB 330, TB 360, TB 360 ES, TB 370, TB 370 XP, TB 380 ES, TB 380 XP, TB 400 XP, TB 430 XP, TB 450 XP, TB449E, TB 490 XP; Tru-Cut 100, 110; Tuff Cut 200, 210, 220, 230; Pro-Cut 300, 310, 320.

Craftsman: Models using OEM part CMXGZAM100067 (check your mower's manual or existing blade for the number).

If you are looking for a simple, wallet-friendly way to keep your push mower cutting cleanly, the BeadChica 2-pack of 21-inch blades is a solid option. These replacement blades are designed to work with several popular brands including Murray, Hyper Tough, Blackmax, and more. They come in a set of two, which is handy for mowers that use dual blades or for having a spare ready when the first set dulls.

Who should pick these up? Homeowners who mow a standard lawn and want to avoid that ragged, browned look from dull blades. Contractors or landscapers with fleets of compatible mowers might appreciate the bulk value too. Installation is straightforward: unplug the spark plug, remove the old blades, and bolt these on. The blades are sharp right out of the package and match the 21-inch length and 2-inch width of most OEM replacements.

Performance wise, these blades do the job. They lift grass effectively and produce an even cut, which keeps your lawn looking healthy. The steel is sturdy enough for typical yard debris, but like any mower blade, they will dull over time with heavy use. They are not coated for rust resistance, so storing them indoors or wiping them dry after wet grass helps longevity.

A couple of realistic points to consider: because these are a generic replacement, the hole pattern might not align perfectly on every mower model. Check your mower's spindle configuration before buying. Also, the slight extra weight compared to some OEM blades could affect balance if you do not install them carefully. But for the money, the 2-pack is a bargain.

Overall, the BeadChica blades are a practical choice for anyone needing a quick, affordable replacement. They restore cutting performance without breaking the bank, and having two blades means you are prepared for the next swap. If you want a trustworthy upgrade for your push mower, these are worth considering.

Product Dimensions: 5 x 5 x 1 inches

Item Weight: 2.89 pounds

Manufacturer: BeadChica

ASIN: B0CS35FP5P

Item model number: 2105200317A

Blade Size: 21 inches long, 2 inches wide

Package Includes: 2 blades

Keeping a lawn pristine requires sharp outdoor power equipment, and having a fresh cutting blade is essential for any push mower. The YXYYXY 2105300125A 20-Inch Lawn Mower Blade is an aftermarket replacement part engineered specifically for 20-inch walk-behind push mowers. Featuring an exact oval center-hole pattern, it serves as a direct swap for factory parts on select Hyper Tough, Murray, Daye, and Oregon units. For homeowners and suburban lawn care enthusiasts who want their grass looking crisp without buying a brand new mower, this replacement blade offers a practical way to revive cutting performance.

Clean cuts directly influence how easily you can manage yard cleanup after mowing. A dull blade tears grass blades, leaving yellow tips and clumpy debris that clings to turf. In contrast, this carbon steel blade features an expanded cutting edge that slices cleanly through grass. The resulting fine clippings break down more naturally or disperse easily across the yard. This makes Saturday morning cleanup straightforward, allowing you to quickly grab your cordless leaf blower to clear grass off the driveway, patio, and sidewalk in just a few passes.

Durability is a key consideration when selecting replacement mower blades, especially when encountering pine cones, twigs, or small rocks hidden in tall grass. Crafted from high-strength carbon steel, this blade is built to withstand impact without warping or cracking. A heavy-duty black powder coating shields the metal surface against rust, grass acidity, and wet yard moisture. This protective layer prolongs the life of the blade through wet spring growth and dry autumn leaf cleanup.

Replacing a worn blade should not require a trip to a repair shop, and this design makes routine seasonal maintenance straightforward. Because it mirrors the OEM spindle shape, you simply disconnect your mower spark plug boot for safety, tilt the deck, unbolt the old blade, and mount this replacement with your existing hardware. There is no need for drilling, shims, or custom fabrication. The secure oval mount seats flat against the spindle to minimize operational vibration during extended mowing sessions.

While this blade is a dependable replacement, its specialized oval mount means it will not fit standard round or star-pattern spindles. Homeowners should verify their mower model number, such as MNA152505, MNA152701, or MNA152516, before ordering. For anyone managing a small to medium suburban yard with a compatible 20-inch push mower, this blade provides dependable cutting efficiency and exceptional value for routine lawn maintenance.

Manufactured from thick carbon steel, this 20-inch blade is designed to handle tough backyard conditions. The steel composition provides torsional strength, preventing the blade from bending when striking tough patches of thatch or hidden yard debris.

The electrostatically applied black powder coat resists corrosion caused by moisture, soil contact, and acidic grass sap. This extra layer of surface protection keeps the blade functional across changing seasons, whether you are mulching fallen leaves in autumn or tackling fast-growing spring turf.

Installing this replacement blade takes only minutes with basic garage tools. Before starting, always disconnect the spark plug wire to prevent accidental engine starts, and wear heavy work gloves to protect your hands while handling sharp edges.

Remove the central retaining bolt from your mower deck, clean any caked clippings from the spindle adapter, and align the oval center hole directly onto the mounting hub. Reattach the original washer and bolt, tightening securely to manufacturer torque specifications for smooth, balanced operation.

The 8TEN LawnRAZOR Mulching Blade 2-Pack is a direct-fit replacement set engineered for Murray riding mowers and lawn tractors fitted with 40-inch cutting decks. Keeping tractor blades sharp is one of the most critical maintenance tasks for a tidy lawn, yet OEM parts can get costly. This matched pair offers a rugged, budget-conscious alternative built to restore clean cutting performance and efficient grass clipping management for homeowners, DIY tractor mechanics, and small property managers.

In practical lawn maintenance, blade geometry dictates how clean your lawn looks after a single pass. These LawnRAZOR blades measure 20 3/8 inches in length and feature a distinct mulching curve designed to suspend clippings under the deck longer. That extended lift chops grass into fine particles that decompose quickly rather than discharging heavy, unsightly clumps across your turf. The 0.138-inch blade thickness provides enough rigidity to handle thick summer fescue and occasional hidden sticks without wobbling or losing shape.

Deck serviceability is straightforward. The blades feature a clean 7/8-inch round center bore that mounts flush onto standard Murray spindles with stock hardware and a torque wrench. Because they come properly balanced out of the box, spindle bearings experience minimal vibration, reducing overall wear on deck belts and pulleys during lengthy mowing sessions. The green protective coating prevents rust during seasonal storage in unheated garages or damp tool sheds.

Keep in mind that these blades feature a standard circular mounting hole, meaning they will not fit star-shaped arbor shafts. Additionally, while the cutting edges are ground prior to powder coating, serious lawn care enthusiasts will likely want to give the cutting bevels a quick pass with a hand file to remove excess paint before mounting them. If you run heavy, soaking wet grass, bagging blades may clear the deck faster, but for regular turf grooming and natural fertilization, this mulching set is tough to beat.

For owners maintaining classic Murray 40-inch riders, this 8TEN LawnRAZOR 2-pack delivers reliable cutting strength, dependable clipping management, and effortless installation. It provides an honest, durable solution to refresh your cut quality for another long mowing season.

This 2-pack is designed to replace multiple legacy equipment part numbers across Murray and Rover product lines. Key OEM reference numbers include 095103E701, 095103E701MA, 092544E701, 056251E701MA, 456251, 56251E701, 95103-853, and Rover 92544E701.

It fits Murray 40-inch tractor decks including popular models like 405000x31B, 405000x8F, 405002x8A, 405011x92A, 405030x48A, 40504x92A, 40507x31A, 40541C, 405606x190B, and 42541B, along with the Murray 24755D 42-inch mulch kit. Always confirm spindle shape and diameter before servicing your deck.

Blade Length: 20 3/8 inches

Blade Width: 2 1/4 inches

Material Thickness: 0.138 inches

Center Hole Diameter: 7/8 inch round

Blade Profile: Mulching / Lift

Quantity: 2 Blades per package

Finish: Green anti-corrosion powder coat

The 8TEN LawnRAZOR High-Lift Mower Blade set is engineered as a direct replacement pair for older 38-inch Murray riding mowers and lawn tractors. For homeowners with medium to large suburban yards, keeping mower blades sharp is just as crucial as maintaining a reliable leaf blower or string trimmer. Dull blades tear grass rather than slicing it, leaving brown, frayed tips across the lawn. This high-lift replacement set restores cutting precision, allowing your Murray tractor to tackle weekly grass cutting with consistent results.

This blade set is best suited for suburban lawn owners, rural property caretakers, and budget-conscious DIYers who maintain their own outdoor power equipment. If you rely on a classic Murray tractor to handle seasonal mowing, finding quality replacement parts without paying dealer prices is essential. Homeowners who like a manicured appearance will appreciate the high-lift design, which pulls standing grass blades upright before slicing them cleanly, making post-mow leaf and debris blowing much simpler along sidewalks and driveways.

Performance on the lawn depends heavily on airflow, and the pronounced rear lift on these 8TEN blades generates strong suction under the cutting deck. This increased air velocity helps propel wet or heavy grass clippings out of the discharge chute or into a rear bagging attachment without clumping. Clean discharge leaves fewer messy windrows on your turf, meaning less time spent raking or blowing heavy piles off the grass on Saturday mornings.

Build quality matches the rigorous demands of seasonal yard work. Each blade measures 19 5/16 inches in length, 2 1/4 inches in width, and boasts a thick 0.197-inch steel gauge. The substantial thickness helps resist chipping and gouging when encountering stray acorns, pine branches, or occasional surface roots. A distinctive green powder coating protects the bare steel from moisture, humidity, and acidic lawn juices while in storage or sitting inside a garden shed between seasonal cuts.

Installation is straightforward for any homeowner familiar with basic outdoor equipment maintenance. The blades feature a 7/8-inch round center hole that slides directly onto standard Murray spindles. Using basic hand tools and observing standard safety protocols, such as disconnecting the tractor spark plug wire and wearing thick work gloves, swapping out an old set takes only a short time in the garage or driveway.

Before purchasing, it is important to confirm your mower deck specifications. These blades are tailored specifically for Murray 38-inch decks requiring part number 91742 or 91742HT with round 7/8-inch mounting holes, so they will not fit star-shaped spindle assemblies. For owners of compatible Murray machines, this 8TEN 2-pack provides a cost-effective, dependable solution to keep your lawn looking sharp all season long.

Built from high-tensile steel, these 8TEN LawnRAZOR blades are designed to withstand the physical stress of routine mowing across rough suburban turf. The 0.197-inch steel thickness provides solid structural rigidity, resisting warping or bending when tackling tall weeds or running across bumpy terrain.

The durable powder-coat finish covers the body of each blade, offering a protective barrier against moisture and rust during damp spring and summer conditions. While the cutting edge will naturally shed its coating during the first mow, the primary surface remains protected, ensuring longevity and long-term balance throughout the cutting season.

Maintaining your mower blades ensures long engine life and clean turf health. Before seasonal lawn care begins, inspect both blades for balance and sharpness. While these blades arrive pre-sharpened, touching up the cutting bevel with a metal file or bench grinder once or twice a season helps preserve a clean cut.

Always disconnect the mower spark plug before inspecting or removing blades under the deck. After mowing damp grass, scrape away packed clippings from underneath the deck and around the blades to prevent moisture buildup and maintain peak high-lift airflow for your next yard cleanup.

Keeping a lawn healthy comes down to the quality of the cut, and that starts directly with the blade under your deck. The Murray 7103288YP is a genuine 22-inch OEM 3-in-1 lawn mower blade produced under the Briggs and Stratton family of outdoor power equipment. Built for Murray, Snapper, and Simplicity walk-behind mowers, this blade handles mulching, bagging, and side discharge without requiring you to switch parts between different yard chores.

For homeowners and property DIYers, sticking with an authentic factory blade avoids the vibration and mounting headaches that frequently pop up with generic universal blades. At roughly 2.58 pounds, the blade has enough mass to slice through dense patches of tall fescue or bluegrass without bogging down your engine. The integrated lift wings push strong airflow through the deck housing, pulling flat turf upright right before the cutting edge passes over it and driving the clippings cleanly into your collection bag.

Durability is solid across the board. The heavy stamped steel resists minor surface impacts like acorns, mulch chunks, or exposed tree roots without easily chipping or wobbling out of true. Because it arrives factory balanced, it prevents excessive crankshaft vibration that can wear down engine oil seals and lower spindle bearings over time.

The main limitation is specific fitment. Briggs and Stratton produces multiple 21-inch and 22-inch deck configurations, so double-checking your mower model, spec code, and center-hole pattern is necessary before ordering. You will also need to reuse your factory bolt and washer, as mounting hardware is not included in the package.

If your mower has started tearing grass tips instead of slicing them clean, this Murray replacement blade is an easy, cost-effective fix. It drops right onto compatible 22-inch walk-behind decks and brings back crisp, reliable cutting performance for the season ahead.

This blade is built specifically for 22-inch mower decks on walk-behind equipment manufactured under the Murray, Snapper, and Simplicity nameplates utilizing Briggs and Stratton part numbers. Always cross-reference your deck model and serial number on the mower frame to ensure center-hole and length compatibility.

To maintain peak performance, inspect the cutting edge every few mowings for gouges from hidden yard rocks. A standard metal hand file or workshop bench grinder can clean up dull spots between seasonal tune-ups. Remember to verify blade balance on an inexpensive wall cone balancer after sharpening to keep rotation vibration-free.

If you own a Hyper Tough or Murray 20-inch push mower, keeping the blade sharp is key to a clean cut and a healthy lawn. The TOSRWGLL 2105300125A replacement blade is designed as a direct fit for several popular models, including the MNA152505 and MNA152701. It also works with Daye and Murray mowers, making it a versatile option for many homeowners who prefer to maintain their equipment themselves rather than buying a new mower.

This blade is best suited for budget-conscious homeowners and DIY lawn care enthusiasts who want to restore cutting performance without spending a lot. It is not a high-end mulching blade, but it does offer a standard cutting edge with a tungsten carbide coating that helps it stay sharp longer than basic steel blades. The powder-coat finish adds a layer of protection against rust, which is a common problem when mowers are stored in humid environments like garages or sheds.

In terms of cutting performance, the extended cutting surface is designed to improve efficiency by moving more grass with each pass. Many users may find that a fresh blade like this one makes a noticeable difference in how evenly the lawn is cut, especially after a season of use on the original blade. The blade is meant for standard grass cutting and light mulching, but it is not a specialized mulching or bagging blade. For typical suburban lawns, it should handle the job well.

Build quality appears solid for the price. The powder coating is evenly applied, and the tungsten carbide edge is fused to the blade. The replacement part numbers (355-101, 212-9903) are clearly listed, which helps with compatibility checks. Installation is straightforward for anyone comfortable with basic mower maintenance. You will need to remove the old blade, install the new one, and ensure it is properly torqued. Some users may want to balance the blade after installation to avoid vibration, which is a standard step for any replacement blade.

One realistic limitation is that this blade is not universal. It only fits specific mower models, so you must verify compatibility before purchasing. Also, there are currently no user reviews available, so firsthand feedback on long-term durability is not yet available. However, based on the product specs, it offers good value for anyone needing a simple replacement blade that resists rust and holds its edge reasonably well.

Overall, this TOSRWGLL blade is a practical choice for homeowners who want to keep their Hyper Tough or Murray mower running effectively without spending a lot. It is easy to install, affordable, and designed to reduce the frequency of sharpening. For suburban lawn care and routine mowing, it should meet most expectations. If you are looking for a basic replacement blade with rust resistance and a longer-lasting edge, this is worth considering.