How to Find Toro Lawn Mower Model Number: Answers and Tips

The Toro 105-1842 Mulch Plug is an essential deck accessory built for Toro walk-behind mowers equipped with a rear discharge port. By blocking off the tunnel beneath the rear safety shield, this plug converts a bagging or rear-throw mower back into a closed-chamber mulching setup. It suits residential property owners, DIY landscapers, and yard maintenance enthusiasts who want to feed micro-clippings directly back into their turf rather than hauling heavy grass bags.

In practical use, maintaining a tight deck seal is everything when mulching. If your original plug has cracked, warped, or disappeared over the seasons, grass clippings escape past the rear door, reducing the deck's internal vortex and leaving unsightly trails across the lawn. This plug slots neatly into the rear chute opening, trapping air and circulating clippings repeatedly past the blade tips until they are chopped into fine, nutrient-rich particles.

Build quality matches factory standards. Toro uses an impact-resistant, high-density composite capable of handling wet grass accumulation, abrasive sand, and stray pebbles without chipping or deforming. Its compact 8-inch by 4-inch profile slides directly beneath the mower's rear door flap, seating firmly against the deck housing so it won't shake loose under heavy engine vibration or uneven terrain.

The primary consideration before buying is verifying your mower's specific deck dimensions and model serial numbers. Because Toro manufactures several deck styles with varying rear tunnel geometry, this unit will not fit every universal push mower. Double-check your equipment manual to verify part number 105-1842.

For anyone dealing with a lost or damaged rear plug, this OEM replacement solves clipping leakage instantly. It restores peak mulching efficiency, keeps your paths tidy, and extends the working life of your mower deck with zero installation headaches.

Installing the Toro 105-1842 is quick and requires no hand tools. Simply shut off your mower engine, disconnect the spark plug boot for safety, and lift the rear spring-loaded discharge shield. Clear away any caked grass clippings or dirt buildup inside the discharge tunnel with a stiff putty knife to ensure a snug seating surface.

Slide the plug into the channel until it rests flush with the deck contour, then release the rear door down over the plug to lock it into place. For end-of-season mower maintenance, pull the plug out and wash off packed debris with a garden hose to prevent dried mulch from hardening against the composite frame over winter storage.

The Toro 2PK Genuine OEM 30-inch TimeMaster Mower Blade Adapter (part number 120-5236) is a small but critical component for anyone running a Toro TimeMaster walk-behind mower. This adapter sits between the blade and the spindle, securing the blade in the correct orientation and preventing it from shifting during operation. It’s not a flashy tool, but without it your mower simply won’t cut safely or evenly.

This part is designed for DIY homeowners and lawn care professionals who rely on the TimeMaster’s 30-inch cutting deck for faster mowing. The genuine OEM build means the hole pattern, thickness, and hardness match Toro’s original specs exactly. That translates to zero guesswork during installation and a tight, wobble-free blade mounting every time. In real-world use, that means less vibration transmitted through the deck and handle, which reduces fatigue on long mowing sessions.

Durability is a strong point here. These adapters are made from hardened steel, so they won’t deform or crack under the stress of hitting sticks, rocks, or uneven terrain. The two-pack is especially handy because you can replace both adapters at once or keep a spare on hand for when the first one wears out. Installation is straightforward: remove the blade bolt, swap the old adapter, and torque the new one to spec. Any competent DIYer can do it in under ten minutes per blade.

One realistic limitation is compatibility. These adapters only fit the Toro TimeMaster 30-inch deck. If you own a different Toro model or another brand, you’ll need the correct part for your machine. Also, while the price is fair for OEM quality, it’s higher than generic steel adapters. However, the peace of mind that comes with a perfect fit and reliable safety is worth the extra cost for most owners.

Overall, if you own a Toro TimeMaster and need to replace a worn or damaged blade adapter, this genuine OEM two-pack is the right choice. It restores proper blade alignment, cuts down vibration, and keeps your mower performing at its best. Whether you’re a weekend lawn enthusiast or a full-time landscaper, these adapters are a simple, smart investment in your equipment’s reliability.

This hardcover book focuses on the creative world of filmmaker Guillermo del Toro. While not a power tool or workshop equipment, it serves as a valuable resource for DIYers, woodworkers, and artists who draw inspiration from design and storytelling. The book offers a deep dive into del Toro's creative process, featuring sketches, concept art, and behind-the-scenes insights that can spark new ideas for your own projects.

The book is best suited for creative professionals and enthusiasts who appreciate the intersection of art and craftsmanship. Woodworkers might find inspiration in the intricate creature designs and set pieces, while DIYers can apply narrative thinking to their builds. The hardcover binding and large format make it a durable addition to any workshop reference library, though it's not a tool you'll use directly on the job.

Build quality is solid with a sturdy hardcover that can withstand occasional handling in a workshop environment. The pages are thick and glossy, which helps protect the detailed images and text. At under 3 pounds, it's portable enough to take from the workshop to the living room, though it's heavier than a standard paperback.

One realistic limitation is that this book doesn't offer practical instructions or how-to guides. It's purely inspirational, so if you're looking for step-by-step woodworking plans or tool reviews, this won't replace those resources. However, for creative minds seeking to expand their design vocabulary, it's a worthwhile investment.

Overall, this book is a solid choice for anyone who wants to explore the artistic side of craftsmanship. It won't drill holes or cut wood, but it might just inspire your next great project. If you're a fan of del Toro or interested in narrative design, this hardcover is worth picking up.

The Toro 60V MAX Super Recycler is a premium battery-powered walk-behind mower that sets a new standard for cordless lawn care. It's built around Toro's legendary Super Recycler cutting system, which uses dual blade accelerators and under-deck wedges to slice grass clippings into ultra-fine particles. These particles, which Toro calls Lawn Vitamins, are then blown back into the turf to naturally fertilize your lawn. This mower is best suited for homeowners who take pride in a lush, healthy lawn and want professional-grade mulching without the hassle of gas and oil.

In real-world use, the Super Recycler delivers outstanding performance. The 21-inch steel deck and Vortex technology create powerful airflow that keeps clippings moving whether you're mulching or bagging. The Personal Pace self-propel system is a standout feature: it senses your walking speed and adjusts the drive automatically, so you never have to fiddle with levers or cables. Push-button start gets you going instantly, and the 60V MAX battery platform gives you plenty of power for a typical suburban lawn. With a recommended 4.0Ah or higher battery, you can easily mow up to a third of an acre on a single charge. The bagging tunnel is also well-designed, holding more clippings and reducing the need to empty mid-mow.

Build quality is excellent. Toro uses commercial-grade components in the deck and drive system, so this mower feels solid and ready for years of regular use. The SmartStow feature is a game-changer for storage: the handle folds, the mower locks in a vertical position, and it takes up 70% less floor space. At 78 pounds, it's not the lightest mower on the market, but the Personal Pace drive makes it easy to maneuver, and the weight adds to the stability and cut quality. The battery platform is flexible, with options from 4.0Ah to 7.5Ah, and Toro's Flex-Force system offers intelligent software to maximize runtime and power.

There are a couple of realistic drawbacks. First, the battery and charger are sold separately, which significantly increases the initial investment if you don't already own Toro 60V tools. Second, the weight might be a concern for some users, especially when lifting it for storage or loading into a truck. Third, while the battery platform is robust, it's proprietary, so you can't share batteries with other major brands like DeWalt or Milwaukee. That said, if you're already in the Toro ecosystem, this mower is a no-brainer.

Overall, the Toro 60V MAX Super Recycler is a top-tier choice for anyone serious about lawn care. It combines professional mulching performance with the convenience of battery power, intuitive self-propel, and space-saving storage. If you have a medium to large lawn and want a durable, low-maintenance mower that will keep your grass looking its best, this is an excellent investment. Just be prepared to budget for the batteries and charger.

Brand: Toro
Model: 21568T
Power Source: Battery Powered (60V MAX)
Deck Size: 21 inches
Cutting Height: 1 to 4 inches
Weight: 78 pounds
Drive Type: Personal Pace Self-Propel (Rear Wheel Drive)
Blade: Single blade with dual accelerators
Material: Steel deck with plastic components
Color: Black/Red
Product Dimensions: 41.13 x 24.5 x 17.25 inches
Assembly Required: No
Battery/Charger Included: No

This mower is part of Toro's Flex-Force 60V MAX battery system. It is compatible with all Toro 60V batteries, including the 4.0Ah, 5.0Ah, 6.0Ah, and 7.5Ah options. The batteries feature intelligent software that optimizes runtime and power output based on the load. Charging times vary: a 4.0Ah battery takes about 240 minutes with the standard charger, while the rapid charger can recharge a 7.5Ah battery in roughly 136 minutes. For best results with this mower, Toro recommends at least a 4.0Ah battery for mowing up to 1/3 acre per charge. If you have a larger lawn or want to mow without interruption, consider investing in a higher-capacity battery or a spare.

The Toro 60V MAX 30 in. eTimeMaster is a battery-powered walk-behind mower designed for homeowners with substantial lawns who want gas-level performance without the maintenance. This is the tool-only version, meaning you supply your own Flex-Force 60V batteries and charger. It's built around a massive 30-inch all-steel deck and a cast aluminum frame, giving it a commercial-grade feel that's rare in cordless mowers.

Performance is where this mower shines. The Dual Force cutting system uses two timed blades that work together to create a fine mulch, returning nutrients to the soil. Toro claims it reduces cutting time by 40% compared to a standard 21-inch mower, and in practice that holds up. The Personal Pace auto-drive is genuinely intuitive it senses your walking speed and adjusts the self-propel accordingly, so you never have to fiddle with levers. Push-button start and dual LED headlights make early morning or late evening mowing easy. With recommended 7.5Ah batteries, you can handle up to 2/3 acre on a single charge.

Build quality is excellent. The steel deck is thick and resistant to dings, and the aluminum frame keeps weight manageable despite the 30-inch width. At 161 pounds, it's not light, but the self-propel system makes it easy to push on flat ground. The Quick Stow handle folds down for compact storage, and the overall design feels well thought out for residential use. It's also part of Toro's Flex-Force 60V system, so you can swap batteries with other tools in the lineup.

There are a couple of drawbacks. The weight can be a challenge on slopes or if you need to lift it into a truck bed. And since batteries and charger are sold separately, the upfront cost is higher than a gas mower. Also, the 30-inch deck is wide, so it won't fit through narrow gates or into tight storage spaces easily.

Overall, the Toro eTimeMaster is a top choice for homeowners with half an acre or more who want a fast, low-maintenance mow. It's not for small yards or steep hills, but for flat to moderate terrain, it delivers gas-like power with battery convenience. If you already own Flex-Force tools, this is a no-brainer upgrade. If not, factor in the battery investment, but the performance and build quality justify the price.

Brand: Toro

Model: 21491T

Power Source: 60V MAX battery (tool only, batteries not included)

Deck Size: 30 inches (76 cm)

Deck Material: Alloy steel with cast aluminum frame

Cutting System: Dual Force timed two-blade system

Self-Propel: Personal Pace Auto-Drive (rear wheel drive)

Start Type: Push-button electric

Headlights: Dual LED

Handle: Quick Stow foldable

Weight: 161 pounds (73 kg)

Dimensions: 41.75 x 33 x 24.5 inches

Battery System: Flex-Force 60V MAX (compatible with 2.0Ah to 10.0Ah batteries)

Recommended Batteries: 4.0Ah, 5.0Ah, 6.0Ah, 7.5Ah

The Toro eTimeMaster runs on the Flex-Force 60V MAX battery system, which powers over 75 tools including trimmers, blowers, chainsaws, and more. This tool-only mower lets you use batteries you may already own, or you can purchase bundles with compatible batteries and chargers. For best results on large lawns, Toro recommends 7.5Ah or 10.0Ah batteries. The system uses a 60V platform, so batteries are interchangeable across the lineup, making it easy to expand your cordless tool collection without buying new chargers.

The Toro 50 in. TimeCutter Recycler Kit (part 79019) is a purpose-built mulching conversion for select Toro TimeCutter zero-turn mowers manufactured from 2011 onward. If you own one of the compatible models listed by Toro, this kit offers a straightforward way to stop bagging clippings and start recycling them back into your lawn.

In real-world use, the kit does exactly what it claims. The baffle directs clippings back into the deck where the blades cut them multiple times before they settle onto the turf. The result is a fine, almost dust-like mulch that decomposes quickly, releasing nitrogen and other nutrients into the soil. For homeowners who maintain a regular mowing schedule, this can lead to a noticeably greener lawn with less need for synthetic fertilizers. The installation process is simple and requires only basic hand tools; you swap out the side discharge chute and bolt on the included baffle and plug.

Build quality is what you'd expect from Toro OEM parts. The steel components are powder-coated black to resist corrosion, and the fitment is precise, leaving no gaps that might allow clippings to escape. Once installed, the kit stays in place season after season with no rattles or loose hardware. It's a set-and-forget upgrade.

That said, there are a couple of limitations. This kit only fits the specific models and serial number ranges listed by Toro, so you must verify compatibility before purchasing. It also locks you into mulching mode; if you occasionally need side discharge for tall grass or leaf cleanup, you'll have to uninstall the kit and swap back to the original chute. Additionally, mulching works best when you mow frequently, so if you let the grass get too long, you may still see clumps.

Overall, the Toro TimeCutter Recycler Kit is a solid investment for anyone with a compatible mower who wants a better lawn with less effort. It's practical for homeowners who prefer a tidy appearance without the hassle of bagging, and it's built to last. If you frequently mow and want to save time while improving your turf, this OEM kit is the way to go.

Part Number: 79019

Color: Black

Dimensions: 33 x 16 x 6 inches

Weight: 1.5 pounds

Product Group: Lawn & Patio

Fits Models: Toro TimeCutter SS and SW models from 2011 onward (check serial number for full compatibility)

Ideal for homeowners with a compatible Toro TimeCutter mower who want to mulch clippings instead of bagging. Best used on lawns mowed regularly at the proper height. Also great for those looking to reduce yard waste and naturally fertilize their grass.

The Toro 79024 Mulch Kit is a dedicated accessory for the TimeCutter MX zero turn mower with a 50 inch cutting deck. This OEM kit includes the necessary baffles, plugs, and hardware to convert your mower from side discharge or bagging to a true mulching setup. Instead of collecting clippings in a bag or spraying them out the side, the kit recirculates the grass inside the deck, cutting it multiple times into fine particles that settle into the lawn.

This kit is best suited for homeowners, landscapers, and property managers who maintain larger turf areas with a zero turn mower. If you've been bagging clippings and want to save time by eliminating bagging while still returning nutrients to the soil, this is a solid upgrade. It's also a practical choice if you prefer a cleaner look without the hassle of disposing of bags of wet grass.

Real world performance is excellent for normal mowing conditions. The kit's design works with the mower's factory blades to create a vacuum that lifts grass and chops it repeatedly. You'll notice finer clippings that decompose quickly, feeding the lawn naturally. The kit doesn't affect the mower's ground speed or turning ability, so you maintain the same zero turn maneuverability. In dry to moderately damp grass, the mulching is impressive with no clumping observed. In very tall or wet grass, you may need to slow down or make multiple passes to avoid leaving piles of clippings.

Build quality is typical Toro sturdy steel construction with durable black powder coating. All mounting hardware is included and clearly labeled. Installation is straightforward but requires lifting the mower deck and removing existing discharge deflectors. Most DIYers can complete the job in about 45 minutes with basic hand tools. The kit adds only about 5 pounds to the deck, which is negligible and doesn't affect balance.

One realistic drawback is compatibility: this kit only fits the Toro TimeCutter MX with a 50 inch deck. Double check your model number before ordering. Also, if you frequently mow overgrown lawns, mulching won't be as effective as bagging. But for regular weekly mowing, this kit is a fantastic asset that reduces lawn waste and saves time. Overall, the Toro 79024 Mulch Kit is a worthwhile investment for anyone serious about lawn health and efficiency with their TimeCutter MX mower.

Brand: Toro

Part Number: 79024

Product Type: Mulch Kit for Zero Turn Mower

Compatible Mower: Toro TimeCutter MX with 50 inch cutting deck

Finish: Black powder coated steel

Weight: Approximately 5 pounds

Dimensions: 32 x 10 x 7 inches

Material: Durable steel with corrosion resistant coating

This mulch kit is ideal for homeowners who mow their lawn weekly and want to recycle clippings for natural fertilization. Landscapers will appreciate the time savings from not stopping to empty bags while maintaining a professional looking property. It also works well for large lots where bagging would produce too much waste to manage. Avoid using this kit when grass is excessively tall or wet unless you plan to mow slowly and make multiple passes.